![[PukiWiki]](image/pukiwiki.png "[PukiWiki]")
looks like this release is cocked up, booting works and so X11, but commands like pkg_add are missing ? even an 'ls -l' causes core dump! I assume is automatic build and no existent QA? #FuguIta
@chris, I tested again shown below. pkg_add and 'ls -l' worked.
Before each release, I run these tests on all platforms to ensure that they work properly. - kaw
Script started on Sun Aug 25 04:39:47 2024
nimbus18$ doas vmctl start -c -i1 -n uplink -m 2G -d FuguIta-7.5-amd64-202408201.img fi75test
doas (kaw@nimbus18.honjoji.local) password:
Connected to /dev/ttyp6 (speed 115200)
Using2drive 0, partition 3.
Loading......
probing: pc0 com0 mem[638K 2046M a20=on]
disk: hd0+
>> OpenBSD/amd64 BOOT 3.65
/
>> bsd-fi.mp is for
>> multiprocessor kernel (default).
>> Enter 'bsd-fi' for Uniprocessor.
boot>
cannot open hd0a:/etc/random.seed: No such file or directory
booting hd0a:/bsd-fi.mp: 17880917+4293640+2363424+0+1236992|[1547410+128+1398216+1093260]=0x1c71570
entry point at 0xffffffff81001000
[ using 4040048 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2024 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 7.5-stable (RDROOT.MP) #22: Tue Aug 20 08:22:15 JST 2024
root@nimbus12.localnet:/opt/fi/7.5/sys/arch/amd64/compile/RDROOT.MP
real mem = 2130694144 (2031MB)
avail mem = 2043252736 (1948MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf2760 (10 entries)
bios0: vendor SeaBIOS version "1.16.3p0-OpenBSD-vmm" date 01/01/2011
bios0: OpenBSD VMM
acpi at bios0 not configured
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel(R) Core(TM) m3-7Y30 CPU @ 1.00GHz, 1608.02 MHz, 06-8e-09
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,CX8,SEP,PGE,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,PCLMUL,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,RDRAND,HV,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,RDSEED,ADX,SMAP,CLFLUSHOPT,MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache
cpu0: smt 0, core 0, package 0
cpu0: using Skylake AVX MDS workaround
pvbus0 at mainbus0: OpenBSD
pvclock0 at pvbus0
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "OpenBSD VMM Host" rev 0x00
virtio0 at pci0 dev 1 function 0 "Qumranet Virtio RNG" rev 0x00
viornd0 at virtio0
virtio0: irq 3
virtio1 at pci0 dev 2 function 0 "Qumranet Virtio Network" rev 0x00
vio0 at virtio1: address fe:e1:bb:d1:d3:14
virtio1: irq 5
virtio2 at pci0 dev 3 function 0 "Qumranet Virtio Storage" rev 0x00
vioblk0 at virtio2
scsibus1 at vioblk0: 1 targets
sd0 at scsibus1 targ 0 lun 0: <VirtIO, Block Device, >
sd0: 2048MB, 512 bytes/sector, 4194304 sectors
virtio2: irq 6
virtio3 at pci0 dev 4 function 0 "OpenBSD VMM Control" rev 0x00
vmmci0 at virtio3
virtio3: irq 7
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns8250, no fifo
com0: console
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on rd0a swap on wd0b dump on rd0b
Hibernate error reading disklabel: cannot open disk, 0x1/0x302, error 6
WARNING: clock gained 83 days
WARNING: CHECK AND RESET THE DATE!
==================================================
= ______ __ _
= / ____/ | |_| |__
= / /____ ______ __ _| /_ _/_____
= / ___/ / / / __ \/ / / | | | | / _ |
= / / / /_/ / /_/ / /_/ /| | | |_| (_) |__
= /_/ \____/\__ /\____/ |__| \___/____/__/
= __/ /
= /___/
=
= Welcome to FuguIta - OpenBSD-based Live System
= https://fuguita.org/
===================================================
scanning partitions: sd0a sd0b sd0d sd0i
FuguIta's operating device(s): sd0a.
Which is FuguIta's operating device? [default: sd0a] ->
activating swap partition: /dev/sd0b
available memory: 2031M
total swap size: 16M
Enter mfs size.
You can add suffix K, M, or G.
% is a percentage of memory size.
and %% is a percentage of the total memory and swap.
otherwise considered "megabytes"
[default: 1523M] ->
set mfs size to 1523MB
Boot modes:
0: fresh boot - standard mode as a live system
1: fresh boot - less memory, faster boot
(/usr is non-writable, can't pkg_add)
2: fresh boot - works using only RAM
(about 1GB or more of RAM required)
3: boot with retrieving saved files from storage device
or enter passphrase for an encrypted volume
4: boot with retrieving saved files from floppy disk
5: interactive shell for maintenance
-> 0
Running manual setup.
Copying system files to /ram ... done
Extracting symlinks from /ram to /fuguita ... done
Changing password for root.
New password:
Retype new password:
passwd: password updated successfully
Hostname with domain part (FQDN):
only host name without domain part is also OK.
-> fitest75.local
IP protocol version(s) to be enabled: 4, 6, 46, 64 or "none"
4: enable only IPv4
6: enable only IPv6
46: give priority to IPv4 name resolution
64: give priority to IPv6 name resolution
none: operate as standalone
[64] ->
Network Interfaces: Choose one
NIC type Name
-------- ----- ------------
vio0 ether unknown
[vio0] ->
IPv6 - address and routing:
Enter "auto" or "IPv6_address[/prefixlen] [default_gateway]"
"auto" is an automatic setting by SLAAC.
The "/prefixlen" part can be an integer between 0 and 128.
If there is no default gateway,
set the second field to "none" or leave it blank.
[auto] ->
IPv4 - address and routing:
Enter "auto" or "IPv4_address[/mask] [default_gateway]"
"auto" is an automatic setting by DHCP.
The "/mask" part can be specified in either format,
such as "/255.255.255.0" or "/24".
If there is no default gateway,
set the second field to "none" or leave it blank.
[auto] -> 192.168.65.65/24 192.168.65.254
DNS servers: up to 3 IP addresses, separated by spaces
-> 192.168.65.254
writing configured values to:
/etc/fuguita/netconfs/default/description
/etc/fuguita/netconfs/default/myname
/etc/fuguita/netconfs/default/mygate
/etc/fuguita/netconfs/default/hosts
/etc/fuguita/netconfs/default/hostname.vio0
/etc/fuguita/netconfs/default/resolv.conf
Do you login with C)onsole or X) Window System?
[default: C] ->
_________________________________________________
/ Setup for FuguIta ends. /
/ OpenBSD's boot sequence will follow. /
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Automatic boot in progress: starting file system checks.
pf enabled
machdep.lidaction: 1 -> 0
net.inet.ip.forwarding: 0 -> 0
net.inet.ip.mforwarding: 0 -> 0
net.inet6.ip6.forwarding: 0 -> 0
net.inet6.ip6.mforwarding: 0 -> 0
starting network
reordering: ld.so libc libcrypto sshd.
openssl: generating isakmpd RSA keys... done.
openssl: generating iked ECDSA keys... done.
ssh-keygen: generating new host keys: RSA ECDSA ED25519
sshd: (ED25519) SHA256:QlHh3F2vwx4Wt+breHnPK5TzJTECi/XtAQ9v9FxdQNI
starting early daemons: syslogd pflogd ntpd.
starting RPC daemons:.
savecore: can't find device 17/1
checking quotas: done.
clearing /tmp
kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
starting network daemons: sshd smtpd sndiod.
running rc.firsttime
Get/Verify intel-firmware-20240514v0.tgz ... installed.
fw_update: add intel; update none
starting local daemons: cron.
fuguita: disabled KARL because of read-only media
Sat Aug 24 19:43:18 UTC 2024
OpenBSD/amd64 (fitest75.local) (tty00)
login: root
Password:
OpenBSD 7.5-stable (RDROOT.MP) #22: Tue Aug 20 08:22:15 JST 2024
Welcome to FuguIta, the OpenBSD-based live system.
FuguIta aims to help popularize OpenBSD operating system by making it easier
to get started with.
For information on FuguIta's specific features and how to use them, please
refer to the documentation on https://fuguita.org/.
If you have any questions or suggestions for FuguIta, please send an email to
me or post a message to fuguita.org's message board.
Please feel free to contact me.
Yoshihiro Kawamata
kaw@on.rim.or.jp , https://fuguita.org/
You have new mail.
fitest75# uname -a
OpenBSD fitest75.local 7.5 RDROOT.MP#22 amd64
fitest75# sysctl kern.version
kern.version=OpenBSD 7.5-stable (RDROOT.MP) #22: Tue Aug 20 08:22:15 JST 2024
root@nimbus12.localnet:/opt/fi/7.5/sys/arch/amd64/compile/RDROOT.MP
fitest75# cat /usr/fuguita/version
7.5-amd64-202408201
fitest75# ls -l
total 12
-rw------- 1 root wheel 0 Aug 24 19:42 .Xauthority
-rw-r--r-- 1 root wheel 87 Aug 13 06:58 .Xdefaults
-rw-r--r-- 1 root wheel 578 Aug 13 06:58 .cshrc
-rw-r--r-- 1 root wheel 94 Aug 13 06:58 .cvsrc
-rw-r--r-- 1 root wheel 242 Aug 13 06:58 .login
-rw-r--r-- 1 root wheel 423 Aug 24 19:42 .profile
drwx------ 2 root wheel 512 Aug 19 23:29 .ssh
fitest75# pkg_add neofetch
quirks-7.14: ok
neofetch-7.1.0p0:bash-5.2.26: ok
neofetch-7.1.0p0: ok
fitest75# neofetch --stdout
root@fitest75.local
-------------------
OS: OpenBSD 7.5-stable amd64
Host: vmm (OpenBSD VMM)
Uptime: 2 mins
Packages: 10 (pkg_info)
Shell: ksh v5.2.14 99/07/13.2
Terminal: /dev/tty00
CPU: Intel m3-7Y30 (1) @ 1.608GHz
Memory: 176MiB / 2031MiB
fitest75# halt -p
syncing disks... done
vmmci0: powerdown
The operating system has halted.
Please press any key to reboot.
[EOT]
nimbus18$
Please check your boot time configurations and/or your hardware.
