![[PukiWiki]](image/pukiwiki.png "[PukiWiki]")
This chapter provides information for understanding the internals of FuguIta and for doing your own development based on FuguIta.
FuguIta is based on OpenBSD, so most of its components are openBSD-related information.
For the specific parts of FuguIta that are different from the official OpenBSD, please refer to List of published documents on the Japan Post top page of this site.
(Please note that some past materials may differ from the current FuguIta.)
FuguIta source code can be found at https://github.com/ykaw/FuguIta.
FuguIta has all writable files in memory, so even if the power is suddenly turned off without performing a shutdown operation, etc., there will be no problem with the file system.
Unless you save files with usbfadm during operation, the system will start up in the same state each time.
Using these characteristics, you can create a dedicated machine (Turn Key System) to run a specific application based on FuguIta.
To build such a system, we use a combination of the techniques described so far;
These detailed procedures can be found on this site Creating a router with Fuguita - Example of making an appliance and Practically used FuguIta to use.
We publish the tools we use to build the FuguIta live system, albeit irregularly.
This section explains the steps to build a FuguIta ISO image file.
This explanation assumes the following environment.
In other cases, please read the explanation as appropriate.
All operations are performed with root privileges.
Download the FuguIta build tool tools-7.4.tar.gz and extract it.
# tar xvzpf tools-7.4.tar.gz
Move to the top directory of the build tools.
# cd tools-7.4
For arm64 platform, please also download sysmedia-7.4-arm64.img.gz, which is supplied with tools-7.4.tar.gz, and place it in the top directory of the build tool without extracting it.
Execute the following command to initialize the build tool.
# make init
This will create the files and directories needed for the build.
[Memo]
⇒You can also download and use the installation set *74.tgz and package files rsync-*.tgz, etc. from the official OpenBSD mirror.
However, in this case, FuguIta created will be based on OpenBSD at the time the release was made public, so no later patches have been applied.
Also, even if you create FuguIta using this method, you need to extract the OpenBSD source code under /usr/src or /usr/xenocara.
Copy the installation set (*74.tgz) generated by building OpenBSD to the install_sets directory of FuguIta build tool.
# cp RELDIR/*74.tgz install_sets
RELDIR is the directory where generated release sets are stored, as described in release(8).
[Memo]
⇒ You can customize FuguIta by placing a file called site74.tgz under install_sets. This customization method complies with OpenBSD's https://www.openbsd.org/faq/faq4.html#site .
If install.site is included in site74.tgz, its contents will be added to /etc/rc.firsttime.
Please note that if the file sysmedia/fuguita-7.4-amd64.ffsimg exceeds 2GB as a result of building FuguIta by adding site74.tgz, the ISO image will not be created correctly.
Copy rsync, rlwrap, and pv created from the ports tree to the install_pkgs directory.
I also install rsync and pv in the build environment itself.
# cp /usr/ports/packages/amd64/all/rsync-*.tgz install_pkgs # cp /usr/ports/packages/amd64/all/rlwrap-*.tgz install_pkgs # cp /usr/ports/packages/amd64/all/pv-*.tgz install_pkgs # pkg_add -D unsigned /usr/ports/packages/amd64/all/rsync-*.tgz # pkg_add -D unsigned /usr/ports/packages/amd64/all/pv-*.tgz
Next, run the following command to set up the build environment.
Finally, build FuguIta LiveDVD.
# make setup
create mode0symlinks.cpio.gz
This file is intended to save time when starting LiveDVD in mode 0 (even if this file is not present, there is no problem in starting FuguIta itself).
To create mode0symlinks.cpio.gz, boot the completed LiveDVD in mode 0 and run the gen_mode0sldir command as root with root privileges. After execution, a file called /etc/fuguita/mode0symlinks.cpio.gz will be created.
Place this file in the build tool's lib directory with the file name mode0symlinks.cpio.gz.amd64 and rerun make to create an ISO file containing mode0symlinks.cpio.gz.
adjust fuguita_sys_mb
FuguIta has a file called /etc/fuguita/global.conf, which contains settings related to the entire system as shown below.
fuguita_sys_mb=1042 # size of sysmedia.img newdrive_defswap=16M # default swap size at usbfadm newdrive memfstype=mfs # 'mfs' or 'tmpfs' mfs_max_mb=30720 # mfs hard limit - 30GB
Among these, fuguita_sys_mb defines the size of the partition that stores the Kawabuta board system, and this value is used when remastering FuguIta LiveUSB.
The setting value of fuguita_sys_mb corresponds to the size of the livecd.iso file generated when building a LiveDVD, but it is safe to leave about 10MB in consideration of updates using the fiupdate utility.
# echo $(( $(wc -c < livecd.iso)/1024/1024+10 ))
Write the values displayed by this command to the lib/global.conf.amd64 file and rerun make.
Creating a LiveUSB according to the capacity of the USB memory created a LiveUSB image file. Describes how to create an image.
[Memo]
⇒Since this operation deals with large size files, the size of mfs must be more than 2 gigabytes.
If mfs isn't enough, mount another recording device and work there.
This master_dvd.sh can be used with either a working FuguIta LiveDVD or FuguIta LiveUSB.
Below is an example of using remaster_dvd.sh.
First, create a working directory and copy the contents of LiveDVD/LiveUSB under sysmedia.
fugu-demo# mkdir work fugu-demo# cd work fugu-demo# cp -av /sysmedia . /sysmedia -> ./sysmedia /sysmedia/boot -> ./sysmedia/boot /sysmedia/bsd-fi -> ./sysmedia/bsd-fi /sysmedia/bsd-fi.mp -> ./sysmedia/bsd-fi.mp /sysmedia/boot.catalog -> ./sysmedia/boot.catalog /sysmedia/cdboot -> ./sysmedia/cdboot /sysmedia/cdbr -> ./sysmedia/cdbr /sysmedia/etc -> ./sysmedia/etc /sysmedia/etc/boot.conf -> ./sysmedia/etc/boot.conf /sysmedia/etc/random.seed -> ./sysmedia/etc/random.seed /sysmedia/fuguita-6.9-amd64.ffsimg -> ./sysmedia/fuguita-6.9-amd64.ffsimg fugu-demo# ls -l total 8 drwxr-xr-x 3 root wheel 432 May 11 09:21 sysmedia
Run remaster_dvd.sh inside the copied sysmedia directory. Basically that's all.
fugu-demo# cd sysmedia fugu-demo# ls -l total 2008728 -rw-r--r-- 1 root wheel 90496 May 10 20:57 boot -rwxr--r-- 1 root wheel 2048 May 9 12:31 boot.catalog -rw-r--r-- 1 root wheel 10273019 May 10 21:04 bsd-fi -rw-r--r-- 1 root wheel 10302063 May 10 21:04 bsd-fi.mp -rw-r--r-- 1 root bin 91668 May 10 01:31 cdboot -rw-r--r-- 1 root bin 2048 May 10 01:31 cdbr drwxr-xr-x 2 root wheel 96 Apr 17 2014 etc -rw-r--r-- 1 root wheel 1007681536 May 10 21:08 fuguita-6.9-amd64.ffsimg fugu-demo# remaster_dvd.sh mkhybrid 1.12b5.1 Scanning . Scanning ./etc Size of boot image is 4 sectors -> No-emulation CD boot sector Total translation table size: 0 Total rockridge attributes bytes: 1111 Total directory bytes: 2048 Path table size(bytes): 22 502200 extents written (980 Mb)
After executing remaster_dvd.sh, an ISO image file will be created in the working directory.
fugu-demo# ls -l .. total 2008808 -rw-r--r-- 1 root wheel 1028505600 May 14 02:34 FuguIta-6.9-amd64-202105141.iso drwxr-xr-x 3 root wheel 384 May 14 02:34 sysmedia fugu-demo# ls -l total 2008720 -rw-r--r-- 1 root wheel 90496 May 10 20:57 boot -rwxr--r-- 1 root wheel 2048 May 14 02:34 boot.catalog -rw-r--r-- 1 root wheel 10273019 May 10 21:04 bsd-fi -rw-r--r-- 1 root wheel 10302063 May 10 21:04 bsd-fi.mp -rw-r--r-- 1 root bin 91668 May 10 01:31 cdboot -rw-r--r-- 1 root bin 2048 May 10 01:31 cdbr drwxr-xr-x 2 root wheel 96 Apr 17 2014 etc -rw-r--r-- 1 root wheel 1007681536 May 10 21:08 fuguita-6.9-amd64.ffsimg
There is a file called fuguita-6.9-amd64.ffsimg in sysmedia, which contains the FuguIta file tree. You can customize your LiveDVD by modifying the files in this file tree.
fugu-demo# vnconfig vnd0 fuguita-6.9-amd64.ffsimg fugu-demo# mount /dev/vnd0a /mnt fugu-demo# ls -l /mnt total 52 -rw-r--r-- 1 root wheel 578 May 7 17:43 .cshrc -rw-r--r-- 1 root wheel 468 May 7 17:43 .profile drwxr-xr-x 2 root wheel 512 May 7 17:43 altroot drwxr-xr-x 2 root wheel 1024 May 7 17:46 bin drwxr-xr-x 2 root wheel 512 May 8 04:16 dev drwxr-xr-x 23 root wheel 1536 May 8 04:35 etc drwxr-xr-x 2 root wheel 512 May 7 17:43 home drwxr-xr-x 2 root wheel 512 May 7 17:43 mnt drwx------ 3 root wheel 512 May 8 04:35 root drwxr-xr-x 2 root wheel 1536 May 7 17:46 sbin lrwxrwx--- 1 root wheel 11 May 7 17:43 sys -> usr/src/sys drwxrwxrwt 2 root wheel 512 May 8 04:19 tmp drwxr-xr-x 14 root wheel 512 May 8 04:09 usr drwxr-xr-x 23 root wheel 512 May 7 17:43 var .... (Customization work) ...
Once customization is complete, close the filesystem image and remaster.
fugu-demo# umount /mnt fugu-demo# vnconfig -u vnd0 fugu-demo# remaster_dvd.sh mkhybrid 1.12b5.1 Scanning . Scanning ./etc : :
This section introduces how to create a LiveUSB disk image file.
Run usbfadm newdrive:
? : ? ->newdrive Please make sure the device inserted. Then press ENTER -> ==== disk(s) and vnode devices ============================ sd0 at scsibus1 targ 0 lun 0: <ATA, Hitachi HTS72757, JF4O> sd0: 715404MB, 512 bytes/sector, 1465149168 sectors sd1 at scsibus2 targ 1 lun 0: <UFD 3.0, Silicon-Power32G, 1.00> sd1: 29624MB, 512 bytes/sector, 60669952 sectors sd2 at scsibus5 targ 1 lun 0: <BUFFALO, USB Flash Disk, 4000> sd2: 7788MB, 512 bytes/sector, 15950592 sectors vnd0: not in use vnd1: not in use vnd2: not in use vnd3: not in use vnd4: not in use vnd5: covering /sysmedia/fuguita-6.4-amd64.ffsimg on sd1a, inode 9 ============================================================ Enter the name of device which FuguIta will be installed->vnd0 ← Specify an unused vnode device Enter size of a vnode device file. You can add suffix K, M, G or T (otherwise considered 'bytes'). ->2g 2048+0 records in 2048+0 records out 2147483648 bytes transferred in 3.076 secs (698129518 bytes/sec) Disk: vnd0 geometry: 41943/1/100 [4194304 Sectors] Offset: 0 Signature: 0x0 Starting Ending LBA Info: #: id C H S - C H S [ start: size ] ------------------------------------------------------------------------------- 0: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused 1: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused 2: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused 3: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused Select partition type: 1: [MBR] 2: GPT 3: Hybrid (not recommended if you wish modify partitioning later) -> ～ 略 ～ ** Phase 5 - Check Cyl groups 3 files, 3 used, 386996 free (20 frags, 48372 blocks, 0.0% fragmentation) ? : ? ->bye Bye bye... $
A disk image file is created in the current directory by the above operations. The file name will be the same as the distributed one, "FuguIta-OPENBSD_VERSION-PLATFORM-RELEASE.img".
