*FuguIta 7.0 [#ueaaaea7]

**Pre-Releases [#r8cb30c6]
-[[FuguIta-7.0-i386-202110193.iso>https://jp1.dl.fuguita.org/test/]] ~
--the first test version

--under beta
--no fast boot cache yet
--no preconfigured network settings on arm64 yet

--To accommodate release/machine differences, /mnt/noasks is now /mnt/livecd-config/RELEASE/MACHINE/noasks. ~
usbfadm newdrive will create the noasks file in the new location.~
For backward compatibility, /boottmp/rc will read the noasks into either the old or new location at boot time. ~
If there are noasks in both the old and new locations, rc will display a warning message and stop the non-interactive boot.
--no fast boot cache yet
--no preconfigured network settings on arm64 yet

--Release Candidate

--Applied up to patch-003 of OpenBSD 7.0

**Releases [#n224cce1]

--[[Patch-004 of OpenBSD 7.0>https://www.openbsd.org/errata70.html]] has been applied.

--Network configuration tool enhanced
---In the normal case, except for the hostname, the configuration items can be used with the default settings by simply entering the ENTER key.
---The protocol version to be used is "64" (both IPv6 and IPv4 can be used. IPv6 has priority in name resolution) is now the default.
---IPv6 and IPv4 can now be configured separately.
---For detailed usage, see [[this>FuguIta/BBS#h09c8763]].

--OpenBSD 7.0 [[patches -005 and -006>https://www.openbsd.org/errata70.html]] have been applied.
--The network configuration tools, gennetconfs and chnetconf, have changed their behavior.
---gennetconfs now creates a directory "/etc/netconfs/config_name" and generates a configuration file in it when a config_name is given as an argument.
---more command line options for chnetconf
---When chnetconf is invoked with no arguments, it now reloads the current configuration.
---For more details, see the section named [[複数のネットワーク設定を切り換えて使用する>河豚板ガイド#k430482e]] in [[河豚板ガイド]].

--OpenBSD 7.0 [[patches -007 and -008>https://www.openbsd.org/errata70.html]] have been applied.

--Distribution image changes~
The disk partitioning of the distribution images for the i386 and amd64 platforms has been changed from Hybrid MBR to traditional MBR.~
This distribution image contains an EFI Sys partition, so it can be booted from either Legacy BIOS or UEFI as before.~
Furthermore, once a Hybrid MBR has been created, it has been very difficult to change its contents, but from this release it is now possible to make changes to the partition using OpenBSD's fdisk and disklabel tools.

--usbfadm feature additions
---On the amd64 platform, when executing the newdrive subcommand, it is possible to create media that can be booted from either the Legacy BIOS or UEFI by selecting UEFI as the boot method and MBR as the partitioning method.~
In this case, the Legacy BIOS bootloader will be installed at the same time.
---A new expand sub-command has been added.~
This allows you to expand the data storage partition to the maximum possible capacity.
There are two ways to expand a partition: growfs, which preserves the data in the partition, and newfs, which formats a new partition. Naturally, all existing data will be lost if you use newfs. However, newfs will create a file system with parameters appropriate to the size of the expansion.

--In the auto-startup file "noasks", it is possible to specify the parameters required for startup to eliminate manual input. For storage devices and data storage devices, DUIDs(([[Disklabel Unique IDentifiers>https://www.openbsd.org/faq/faq14.html]])) are now added as comment lines. ~
The DUID is the actual value of the device that has been remastered, so it can be used by commenting it out. ~
This noasks file is automatically generated when you run the newdrive subcommand of the usbfadm utility or the expand subcommand with the newfs option selected.

--OpenBSD 7.0 [[patch-009>https://www.openbsd.org/errata70.html]] has been applied.~
OpenBSD 7.0 [[patch-010>https://www.openbsd.org/errata70.html]] has been applied (amd64 only).
--''/etc/rc.shutdown'' added.~
In this script file, setting ''auto_save_shutdown=Yes'' will cause usbfadm to re-sync on shutdown.

--a change in /etc/rc.shutdown: Uncomment the last line to enable autosave on shutdown.
--added -i option to usbfadm. This is the equivalent of the info subcommand in interactive mode.

--OpenBSD 7.0 [[patch-012>https://www.openbsd.org/errata70.html]] has been applied. (i386, amd64) ~
OpenBSD 7.0 [[patch-013>https://www.openbsd.org/errata70.html]] has been applied.

-- applied patch 014 for OpenBSD 7.0.
-- moved /usr/fuguita/etc to /etc/fuguita. ~
This is so that FuguIta-related configuration files can be edited in boot mode 1. ~
In addition, /etc/netconfs has been moved to /etc/fuguita/netconfs.
There are some incompatibilities when the previous saved files in this release are loaded in boot mode 3. To fix this problem, please do the following.
---1. Move /usr/fuguita/etc to /etc/fuguita.
---2. Move /etc/netconfs to /etc/fuguita/netconfs.
---3. Modify the symbolic link /etc/myname to point to /etc/fuguita/netconfs/'''NETCONF-NAME'''/myname. ~
'''NETCONF-NAME''' is the name of the network configuration, as specified in gennetconf. '''NETCONF-NAME''' is "default" if it has not been changed from the settings for a new boot (boot mode 0, 1, 2).
---4. usbfadm sync to save the changes and reboot. ~
(If usbfadm sync cannot be executed, please perform steps 1 to 3 for the data already saved in the USB flashdrive)

-- applied patch 015 for OpenBSD 7.0

-- applied patch 016 for OpenBSD 7.0

-- applied patch 017 for OpenBSD 7.0

-- applied patch 018 for OpenBSD 7.0

-- applied patch 019 for OpenBSD 7.0

-- applied patch 020 for OpenBSD 7.0
Return to [[FuguIta Top>Welcome]]

Front page   Edit Diff History Attach Copy Rename Reload   New Page list Search Recent changes   Help   RSS of recent changes