![[PukiWiki]](image/pukiwiki.png "[PukiWiki]")
#author("2024-08-25T05:06:03+09:00","","") #author("2024-08-25T05:07:55+09:00","","") * 7.5-amd64 on [#h5aad79e] -Posted by chris at 2024-08-22 (Thu) 22:27:40 -Release: 7.5-amd64-202408201 -Media: USB flashdrive -Hardware: (CPU: x64, Memory: 8GB) ** Remarks [#y7bc1be5] #setlinebreak(on) looks like this release is cocked up, booting works and so X11, but commands like pkg_add are missing ? even an 'ls -l' causes core dump! I assume is automatic build and no existent QA? #FuguIta #setlinebreak(off) ---- @chris, I tested again shown below. pkg_add and 'ls -l' worked.~ Before each release, I run these tests on all platforms to ensure that they work properly. - kaw Script started on Sun Aug 25 04:39:47 2024 nimbus18$ doas vmctl start -c -i1 -n uplink -m 2G -d FuguIta-7.5-amd64-202408201.img fi75test doas (kaw@nimbus18.honjoji.local) password: Connected to /dev/ttyp6 (speed 115200) Using2drive 0, partition 3. Loading...... probing: pc0 com0 mem[638K 2046M a20=on] disk: hd0+ >> OpenBSD/amd64 BOOT 3.65 / >> bsd-fi.mp is for >> multiprocessor kernel (default). >> Enter 'bsd-fi' for Uniprocessor. boot> cannot open hd0a:/etc/random.seed: No such file or directory booting hd0a:/bsd-fi.mp: 17880917+4293640+2363424+0+1236992|[1547410+128+1398216+1093260]=0x1c71570 entry point at 0xffffffff81001000 [ using 4040048 bytes of bsd ELF symbol table ] Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2024 OpenBSD. All rights reserved. https://www.OpenBSD.org OpenBSD 7.5-stable (RDROOT.MP) #22: Tue Aug 20 08:22:15 JST 2024 root@nimbus12.localnet:/opt/fi/7.5/sys/arch/amd64/compile/RDROOT.MP real mem = 2130694144 (2031MB) avail mem = 2043252736 (1948MB) random: good seed from bootblocks mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf2760 (10 entries) bios0: vendor SeaBIOS version "1.16.3p0-OpenBSD-vmm" date 01/01/2011 bios0: OpenBSD VMM acpi at bios0 not configured cpu0 at mainbus0: (uniprocessor) cpu0: Intel(R) Core(TM) m3-7Y30 CPU @ 1.00GHz, 1608.02 MHz, 06-8e-09 cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,CX8,SEP,PGE,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,PCLMUL,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,RDRAND,HV,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,RDSEED,ADX,SMAP,CLFLUSHOPT,MELTDOWN cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 4MB 64b/line 16-way L3 cache cpu0: smt 0, core 0, package 0 cpu0: using Skylake AVX MDS workaround pvbus0 at mainbus0: OpenBSD pvclock0 at pvbus0 pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "OpenBSD VMM Host" rev 0x00 virtio0 at pci0 dev 1 function 0 "Qumranet Virtio RNG" rev 0x00 viornd0 at virtio0 virtio0: irq 3 virtio1 at pci0 dev 2 function 0 "Qumranet Virtio Network" rev 0x00 vio0 at virtio1: address fe:e1:bb:d1:d3:14 virtio1: irq 5 virtio2 at pci0 dev 3 function 0 "Qumranet Virtio Storage" rev 0x00 vioblk0 at virtio2 scsibus1 at vioblk0: 1 targets sd0 at scsibus1 targ 0 lun 0: <VirtIO, Block Device, > sd0: 2048MB, 512 bytes/sector, 4194304 sectors virtio2: irq 6 virtio3 at pci0 dev 4 function 0 "OpenBSD VMM Control" rev 0x00 vmmci0 at virtio3 virtio3: irq 7 isa0 at mainbus0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns8250, no fifo com0: console vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets root on rd0a swap on wd0b dump on rd0b Hibernate error reading disklabel: cannot open disk, 0x1/0x302, error 6 WARNING: clock gained 83 days WARNING: CHECK AND RESET THE DATE! ================================================== = ______ __ _ = / ____/ | |_| |__ = / /____ ______ __ _| /_ _/_____ = / ___/ / / / __ \/ / / | | | | / _ | = / / / /_/ / /_/ / /_/ /| | | |_| (_) |__ = /_/ \____/\__ /\____/ |__| \___/____/__/ = __/ / = /___/ = = Welcome to FuguIta - OpenBSD-based Live System = https://fuguita.org/ =================================================== scanning partitions: sd0a sd0b sd0d sd0i FuguIta's operating device(s): sd0a. Which is FuguIta's operating device? [default: sd0a] -> activating swap partition: /dev/sd0b available memory: 2031M total swap size: 16M Enter mfs size. You can add suffix K, M, or G. % is a percentage of memory size. and %% is a percentage of the total memory and swap. otherwise considered "megabytes" [default: 1523M] -> set mfs size to 1523MB Boot modes: 0: fresh boot - standard mode as a live system 1: fresh boot - less memory, faster boot (/usr is non-writable, can't pkg_add) 2: fresh boot - works using only RAM (about 1GB or more of RAM required) 3: boot with retrieving saved files from storage device or enter passphrase for an encrypted volume 4: boot with retrieving saved files from floppy disk 5: interactive shell for maintenance -> 0 Running manual setup. Copying system files to /ram ... done Extracting symlinks from /ram to /fuguita ... done Changing password for root. New password: Retype new password: passwd: password updated successfully Hostname with domain part (FQDN): only host name without domain part is also OK. -> fitest75.local IP protocol version(s) to be enabled: 4, 6, 46, 64 or "none" 4: enable only IPv4 6: enable only IPv6 46: give priority to IPv4 name resolution 64: give priority to IPv6 name resolution none: operate as standalone [64] -> Network Interfaces: Choose one NIC type Name -------- ----- ------------ vio0 ether unknown [vio0] -> IPv6 - address and routing: Enter "auto" or "IPv6_address[/prefixlen] [default_gateway]" "auto" is an automatic setting by SLAAC. The "/prefixlen" part can be an integer between 0 and 128. If there is no default gateway, set the second field to "none" or leave it blank. [auto] -> IPv4 - address and routing: Enter "auto" or "IPv4_address[/mask] [default_gateway]" "auto" is an automatic setting by DHCP. The "/mask" part can be specified in either format, such as "/255.255.255.0" or "/24". If there is no default gateway, set the second field to "none" or leave it blank. [auto] -> 192.168.65.65/24 192.168.65.254 DNS servers: up to 3 IP addresses, separated by spaces -> 192.168.65.254 writing configured values to: /etc/fuguita/netconfs/default/description /etc/fuguita/netconfs/default/myname /etc/fuguita/netconfs/default/mygate /etc/fuguita/netconfs/default/hosts /etc/fuguita/netconfs/default/hostname.vio0 /etc/fuguita/netconfs/default/resolv.conf Do you login with C)onsole or X) Window System? [default: C] -> _________________________________________________ / Setup for FuguIta ends. / / OpenBSD's boot sequence will follow. / ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Automatic boot in progress: starting file system checks. pf enabled machdep.lidaction: 1 -> 0 net.inet.ip.forwarding: 0 -> 0 net.inet.ip.mforwarding: 0 -> 0 net.inet6.ip6.forwarding: 0 -> 0 net.inet6.ip6.mforwarding: 0 -> 0 starting network reordering: ld.so libc libcrypto sshd. openssl: generating isakmpd RSA keys... done. openssl: generating iked ECDSA keys... done. ssh-keygen: generating new host keys: RSA ECDSA ED25519 sshd: (ED25519) SHA256:QlHh3F2vwx4Wt+breHnPK5TzJTECi/XtAQ9v9FxdQNI starting early daemons: syslogd pflogd ntpd. starting RPC daemons:. savecore: can't find device 17/1 checking quotas: done. clearing /tmp kern.securelevel: 0 -> 1 creating runtime link editor directory cache. preserving editor files. starting network daemons: sshd smtpd sndiod. running rc.firsttime Get/Verify intel-firmware-20240514v0.tgz ... installed. fw_update: add intel; update none starting local daemons: cron. fuguita: disabled KARL because of read-only media Sat Aug 24 19:43:18 UTC 2024 OpenBSD/amd64 (fitest75.local) (tty00) login: root Password: OpenBSD 7.5-stable (RDROOT.MP) #22: Tue Aug 20 08:22:15 JST 2024 Welcome to FuguIta, the OpenBSD-based live system. FuguIta aims to help popularize OpenBSD operating system by making it easier to get started with. For information on FuguIta's specific features and how to use them, please refer to the documentation on https://fuguita.org/. If you have any questions or suggestions for FuguIta, please send an email to me or post a message to fuguita.org's message board. Please feel free to contact me. Yoshihiro Kawamata kaw@on.rim.or.jp , https://fuguita.org/ You have new mail. fitest75# uname -a OpenBSD fitest75.local 7.5 RDROOT.MP#22 amd64 fitest75# sysctl kern.version kern.version=OpenBSD 7.5-stable (RDROOT.MP) #22: Tue Aug 20 08:22:15 JST 2024 root@nimbus12.localnet:/opt/fi/7.5/sys/arch/amd64/compile/RDROOT.MP fitest75# cat /usr/fuguita/version 7.5-amd64-202408201 fitest75# ls -l total 12 -rw------- 1 root wheel 0 Aug 24 19:42 .Xauthority -rw-r--r-- 1 root wheel 87 Aug 13 06:58 .Xdefaults -rw-r--r-- 1 root wheel 578 Aug 13 06:58 .cshrc -rw-r--r-- 1 root wheel 94 Aug 13 06:58 .cvsrc -rw-r--r-- 1 root wheel 242 Aug 13 06:58 .login -rw-r--r-- 1 root wheel 423 Aug 24 19:42 .profile drwx------ 2 root wheel 512 Aug 19 23:29 .ssh fitest75# pkg_add neofetch quirks-7.14: ok neofetch-7.1.0p0:bash-5.2.26: ok neofetch-7.1.0p0: ok fitest75# neofetch --stdout root@fitest75.local ------------------- OS: OpenBSD 7.5-stable amd64 Host: vmm (OpenBSD VMM) Uptime: 2 mins Packages: 10 (pkg_info) Shell: ksh v5.2.14 99/07/13.2 Terminal: /dev/tty00 CPU: Intel m3-7Y30 (1) @ 1.608GHz Memory: 176MiB / 2031MiB fitest75# halt -p syncing disks... done vmmci0: powerdown The operating system has halted. Please press any key to reboot. [EOT] nimbus18$ Please check your boot time configurations and/or your hardware. #navi(FuguIta/Report)
