- The added line is THIS COLOR.
- The deleted line is THIS COLOR.
#author("2022-11-22T13:56:21+09:00","default:kaw","kaw")
河豚板でルータを作る ~ アプライアンスの製作例
#author("2022-11-22T17:50:24+09:00","default:kaw","kaw")
#topicpath
*河豚板でルータを作る ~ アプライアンスの製作例 [#f11d5afe]
RIGHT:EBUG 第83回会合 2022年11月26日 ~
川俣吉広、kaw@on.rim.or.jp
*概要 [#cbab9318]
EBUGの勉強会では、2014年5月に[[実用で使う河豚板>EBUG勉強会/20140507_実用で使う河豚板]]と題して特定のアプリケーションを動かすための専用機(時計表示端末)に仕立てる方法を紹介した。
今回はnsh (network config shell)の河豚板への組み込みを例にとり、現行バージョンの河豚板を用いたアプライアンスの製作方法を紹介する。
**作業の流れ [#w6035d6a]
-LiveUSBの作成
-Liveモードで起動し、基本設定
-ファイルの自動保存→reboot→自動起動するように設定
-nshのインストールと関連設定
**nshについて [#gd288132]
プロジェクトホームページ: https://www.nmedia.net/nsh/ より
>'''NSH は、OpenBSD ベースのネットワークアプライアンスを対象とした CLI です。これは ifconfig, sysctl および route を独自のシンプルなコマンド言語と置き換えるもので 他のデーモンのコンフィギュレーションをひとつの場所にカプセル化し、効果的に アプライアンススタイルで使用するために /etc/netstart と /etc/rc の一部を置き換えています。'''~
'''nshによってカプセル化されたデーモンとサービス: pf, ospfd, ospf6d, bgpd, ripd, ldpd, relayd, ipsecctl, iked, rad.Dvmrpd, sdpf6d, bgpd, ripd, ldpd, relayd, ipsecctl, iked, rad, dvmrpd, sasyncd, dhcpd, snmpd, sshd, ntpd, ifstated, tftp-proxy, ftp-proxy, tftpd, npppd, tftpd, npppd, tftp-proxy, ftp-proxy, tftpd、npppd、resolv.conf、inetd、smtpd、ldapd、ifstated'''
-GitHubリポジトリ: https://github.com/yellowman/nsh
-紹介動画(EuroBSDcon 2022): https://www.youtube.com/watch?v=WMKxIHaWaG0
作のChris Cappuccioはまた、[[flashrd>https://www.nmedia.net/flashrd/]]の作者でもある。
----
#contents
*LiveUSB版を使用 [#n97624f3]
*LiveUSB版河豚板を作成 [#n97624f3]
**ダウンロード [#wa1f8fa3]
[[ダウンロードミラー一覧>FuguIta/Download]]からよさげな場所を選んでダウンロード
# ftp https://jp2.dl.fuguita.org/SHA256
Trying 160.16.199.59...
Requesting https://jp2.dl.fuguita.org/SHA256
100% |*******************************************************| 640 00:00
640 bytes received in 0.00 seconds (2.65 MB/s)
# ftp https://jp2.dl.fuguita.org/FuguIta-7.2-amd64-202211151.img.gz
Trying 160.16.199.59...
Requesting https://jp2.dl.fuguita.org/FuguIta-7.2-amd64-202211151.img.gz
100% |*******************************************************| 332 MB 00:32
348583114 bytes received in 32.14 seconds (10.34 MB/s)
**ファイルの整合性チェック [#g03c034c]
MD5かSHA256のいずれかを用いてダウンロードしたファイルが壊れていないかチェックする。以下はSHA256の例
# sha256 -C SHA256 FuguIta-7.2-amd64-202211151.img.gz
(SHA256) FuguIta-7.2-amd64-202211151.img.gz: OK
**デバイスに書込み [#w0dbe3e1]
/dev/rsdXcには適宜デバイス名を当して実行
# zcat FuguIta-7.2-amd64-nsh_test.img.gz | dd of=/dev/rsdXc bs=1m
*初回起ち上げ [#i7f54524]
**システムデバイスの指定 [#y868bd2e]
単一の河豚板デバイスのみ着していれば、デフォルト(ENTERのみ押下)でOK
scanning partitions: sd0a sd0d sd0i
FuguIta's operating device(s): sd0a.
Which is FuguIta's operating device? [default: sd0a] ->
**MFSサイズの指定 [#u9ef51ad]
デフォルトでは、実メモリの75%をMFSに割り当てる。
available memory: 2031M
Enter mfs size.
You can add suffix K, M, or G.
% is a percentage of memory size.
and %% is a percentage of the total memory and swap.
otherwise considered "megabytes"
[default: 1523M] ->
set mfs size to 1523MB
**起動モードの指定 [#b4a16750]
起動モード0で起動。~
モード1での起動も可。この場合、運用中は完オン・メモリで動作する。
Boot modes:
0: fresh boot - standard mode as a live system
1: fresh boot - less memory, faster boot
(/usr is non-writable, can't pkg_add)
2: fresh boot - works using only RAM
(about 1GB or more of RAM required)
3: boot with retrieving saved files from storage device
or enter passphrase for an encrypted volume
4: boot with retrieving saved files from floppy disk
5: interactive shell for maintenance
-> 0
Running manual setup.
**rootパスワード [#ibee2606]
Changing password for root.
New password:
Retype new password:
passwd: password updated successfully
簡単すぎるパスワードは弾かれるので注意。
**ネットワーク関連の設定 [#lf7dacc4]
ここでの設定は、河豚板をネットワーククライアントとして使用することを想定している。
今回、ルータなどとしての使用を想定しているので、複数のI/Fとその間のフォワーディングなどに関する設定を追加する要がある。~
それらの設定は、起動後にrootでログインして行うか、あるいはnshで行う。
***ホスト名 [#e1fa4ae0]
Hostname with domain part (FQDN):
only host name without domain part is also OK.
-> nshrouter.local
***IPバージョン [#z0417cd1]
IP protocol version(s) to be enabled: 4, 6, 46, 64 or "none"
4: enable only IPv4
6: enable only IPv6
46: give priority to IPv4 name resolution
64: give priority to IPv6 name resolution
none: operate as standalone
[64] ->
[64] ->4
今回はIPv4のみでの運用を想定
***ネットワークインターフェース [#s3ddee1c]
Network Interfaces: Choose one
NIC type Name
-------- ----- ------------
vio0 ether unknown
[vio0] ->
***IPアドレス、デフォルトルート [#e464cca4]
IPv6 - address and routing:
Enter "auto" or "IPv6_address[/prefixlen] [default_gateway]"
"auto" is an automatic setting by SLAAC.
The "/prefixlen" part can be an integer between 0 and 128.
If there is no default gateway,
set the second field to "none" or leave it blank.
[auto] ->
IPv4 - address and routing:
Enter "auto" or "IPv4_address[/mask] [default_gateway]"
"auto" is an automatic setting by DHCP.
The "/mask" part can be specified in either format,
such as "/255.255.255.0" or "/24".
If there is no default gateway,
set the second field to "none" or leave it blank.
[auto] -> 100.64.1.3/31 100.64.1.2
***ネームサーバ [#r48f19fb]
DNS servers: up to 3 IP addresses, separated by spaces
-> 9.9.9.9
**ログイン方法 [#m74b7f13]
Do you login with C)onsole or X) Window System?
[default: C] ->
*ルートでログイン後の設定 [#if05b470]
*ルートでログインして諸設定 [#if05b470]
**タイムゾーン [#qe6320c8]
nshrouter# date
Tue Nov 22 05:28:53 UTC 2022
nshrouter# ln -sf usr/share/zoneinfo/Asia/Tokyo /etc/localtime
nshrouter# date
Tue Nov 22 14:29:02 JST 2022
**シャットダウン時のファイル自動保存 [#w32703d4]
河豚板では、MFS上のデータをUSBメモリ等に保存するにはusbfadmというユティリティを使うが、/etc/rc.shutdownを以下のように編集することでシャットダウン時にusbfadmを実行し、自動的に保存を行うようになる。
nshrouter# vi /etc/rc.shutdown
force_umount=No # set Yes for forced umount /ram at shutdown
force_resync=Yes # set Yes to re-sync at shutdown
force_resync=Yes # set Yes to re-sync at shutdown <== これをYesに変更
# stop_all_daemons - to eliminate all daemons at umount /ram
#
stop_all_daemons () {
:
:
**起動時の設定の自動化 [#c09ecea1]
USBメモリのnoasksというファイルを編集することにより、起動時に手動で入力していた設定が自動化される。
nshrouter# mount /dev/sd0d /mnt
nshrouter# vi /mnt/livecd-config/7.2/amd64/noasks
#
# noasks - parameter settings for non-interactive boot
#
# Make statements uncommented
# Then assign real values
#
#
# FuguIta system device
# - Use one of two lines
#noask_rdev=sd0a # device name format
noask_rdev=3b5447abd772121d.a # DUID format <==アンコメント
#
# mfs size in MB
noask_rdev=3b5447abd772121d.a # DUID format <==アンコメントする
# 常に同じデバイスを指定できる
# mfs size in MB ので、DUIDでの指定推奨
noask_umem=75% <==アンコメント
#
# boot mode
noask_setup_rw_mode=3 <==アンコメント
#
# storage device
# - Use one of two lines
#noask_confdev=sd0d # device name format
noask_confdev=3b5447abd772121d.d # DUID format <==アンコメント
#
# noask_rdevと同じくDUID推奨
# data set name in USB flash drive
noask_confdir=nshrouter <==アンコメント
nshrouter# umount /mnt
*リブートの動作確認 [#wa516f7a]
**手動でMFSの容をUSBメモリに転送 [#j7424422]
**ここまでの設定をとりあえず保存 [#j7424422]
usbfadmを起動し、保存、保存名を指定して保存実行
nshrouter# usbfadm
Welcome to usbfadm.
USB flash drive administration tool for FuguIta
Version/Arch: 7.2/amd64 (FuguIta-7.2-amd64-202211151)
Boot mode: manual
Target device: not set
Data saved as: not set
readline capability available
TAB to complete the reserved words
Type ? for help.
? : ? ->target
Searching storage device
Please make sure the device inserted.
Then press ENTER ->
sd0a +sd0d
target device->sd0d
sd0d : ? ->saveas
Name of saved data->nshrouter
Your data will be saved as ``nshrouter''.
sd0d : nshrouter ->sync
Sync current mfs as ``nshrouter'' , OK? [y/N] -> y
34.4MiB 0:00:04 [8.57MiB/s] [=================================]105% ETA 0:00:00
waiting for pax to finish ... syncing ... done.
sd0d : nshrouter ->quit
Bye bye...
nshrouter#
**リブート [#pca19e77]
チェック目
-シャットダウン時にファイルが自動保存されるか?
-再起動時に自動で立ち上がるか?
nshrouter# reboot
*nsh関連の設定 [#h311791c]
**nshのインストール [#x4962962]
packagesからインストールする
nshrouter# pkg_add nsh
quirks-6.42(signed) 2022-11-20T19:34:54Z
quirks-6.42:ok
Ambiguous:
a 0: <None>
1: nsh-1.0.20220919
2: nsh-1.0.20220919-static
Your choice: 1
nsh-1.0.20220919:ok
nshrouter# nsh
% NSH v1.0
nshrouter.local/quit
% Session terminated.
nshrouter#
**nshの実行アカウントを作成 [#h58613ed]
adduser.confの作成について色訊かれるが、全部デフォルト(ENTER押下)でよい。
nshrouter# adduser nsh
Couldn't find /etc/adduser.conf: creating a new adduser configuration file
Reading /etc/shells
Enter your default shell: csh ksh nologin nsh sh [ksh]:
Your default shell is: ksh -> /bin/ksh
Default login class: authpf bgpd daemon default pbuild staff unbound vmd xenodm
[default]:
Enter your default HOME partition: [/home]:
Copy dotfiles from: /etc/skel no [/etc/skel]:
Send welcome message?: /path/file default no [no]:
Do not send message(s)
Prompt for passwords by default (y/n) [y]:
Default encryption method for passwords: auto blowfish [auto]:
Use option ``-silent'' if you don't want to see all warnings and questions.
Reading /etc/shells
Check /etc/master.passwd
Check /etc/group
Ok, let's go.
Don't worry about mistakes. There will be a chance later to correct any input.
Enter username []: nsh
Enter full name []: Network SHell
Enter shell csh ksh nologin nsh sh [ksh]:
Uid [1000]:
Login group nsh [nsh]:
Login group is ``nsh''. Invite nsh into other groups: guest no
[no]: wheel
Login class authpf bgpd daemon default pbuild staff unbound vmd xenodm
[default]:
Enter password []:
Enter password again []:
Name: nsh
Password: ****
Fullname: Network SHell
Uid: 1000
Gid: 1000 (nsh)
Groups: nsh wheel
Login Class: default
HOME: /home/nsh
Shell: /bin/ksh
OK? (y/n) [y]: y
Added user ``nsh''
Copy files from /etc/skel to /home/nsh
Add another user? (y/n) [y]: n
Goodbye!
nshrouter# exit
OpenBSD/amd64 (nshrouter.local) (tty00)
login: nsh
Password:
nshはroot権限でコマンドを実行するので、nshアカウントはwheelグループに所属させておく。
***~nsh/.profileの編集 [#p7452927]
nshrouter# echo permit nopass nsh cmd /usr/local/bin/nsh
***/etc/doas.confの編集 [#rc995110]
ログイン直後にroot権限でnshが実行されるようにする。
nshrouter$ vi ~/.profile
exec doas /usr/local/bin/nsh
exit # for fail safe
pkg_addでnshをインストールすると、/etc/shellsにnshが登録されるので、これをログインシェルとしてもいいような気もするが、マニュアルページではこの方法は推奨されていない。~
>nsh(8) Section 7 > Adding system users to:~
'''Do NOT add nwrapper (or nsh) to /etc/shells. They should not be entered here.'''
***/etc/doas.confの編集 [#rc995110]
ユーザnshがパスワード無しでroot権限のnshを実行できるように設定
nshrouter# echo permit nopass nsh cmd /usr/local/bin/nsh > /etc/doas.conf
以上で、ユーザアカウントnshでログインするとnshが起動するようになった。
念の為、ここまでの状をUSBメモリに保存しておく
nshrouter# usbfadm -r
========================================
= Sync /dev/sd0d with current mfs as nshrouter
=
sending incremental file list
etc/fstab
154 100% 0.00kB/s 0:00:00 (xfr#1, ir-chk=1078/1094)
:
:
var/spool/smtpd/purge/2135993693/
var/spool/smtpd/temporary/
nshrouter#
一度、保存を行っている場合はコマンドラインから usbfadm -r で保存を再実行できる。
*トラブルシューティング [#j2f3f283]
**OpenNTPDの設定で警告が出る [#s348a0e8]
% NSH v1.0
nshrouter.local/enable
nshrouter.local(p)/ntp edit
servers ntp.nict.jp
configuration OK
nshrouter.local(p)/ntp disable
-s option no longer works and will be removed soon. <== これ。
Please reconfigure to use constraints or trusted servers. ntpd -sはobsolete
-s option no longer works and will be removed soon. <== ntpd -sはobsoleteなので
Please reconfigure to use constraints or trusted servers. ntpdがこの警告を出す。
nshrouter.local(p)/ntp enable
-s option no longer works and will be removed soon.
Please reconfigure to use constraints or trusted servers.
nshrouter.local(p)/!ntpctl -s all
0/5 peers valid, clock unsynced
peer
wt tl st next poll offset delay jitter
133.243.238.163 from pool ntp.nict.jp
1 3 1 2s 5s ---- peer not valid ----
133.243.238.164 from pool ntp.nict.jp
1 3 1 4s 7s ---- peer not valid ----
61.205.120.130 from pool ntp.nict.jp
1 3 1 2s 5s ---- peer not valid ----
133.243.238.243 from pool ntp.nict.jp
1 3 1 2s 5s ---- peer not valid ----
133.243.238.244 from pool ntp.nict.jp
1 3 1 3s 6s ---- peer not valid ----
nshrouter.local(p)/
設定変更は反映されている。
設定変更自体は反映されている。
**nshからreboot/haltでファイルが自動保存されない [#yb6d3791]
nshrouter.local(p)/reboot <= nshの特権モードでrebootを実行
% Reboot initiated
syncing disks... done <= ファイルが自動保存されず、いきなりreboot
vmmci0: powerdown (/etc/rc.shutdownが実行されない)
vmmci0: powerdown /etc/rc.shutdownが実行されない
rebooting...
Using drive 0, partition 3.
Loading......
probing: pc0 com0 mem[638K 2046M a20=on]
disk: hd0+
>> OpenBSD/amd64 BOOT 3.55/*
nshのソースで該当部分を見てみる
nshのソースで該当部分を見てみる~
''commands.c''
/*
* Reboot
*/
int
nreboot(void)
{
printf ("%% Reboot initiated\n");
if (reboot (RB_AUTOBOOT) == -1) <== reboot(2)が呼び出されている
printf("%% reboot: RB_AUTOBOOT: %s\n", strerror(errno));
return(0);
}
int
halt(void)
{
printf ("%% Shutdown initiated\n");
if (reboot (RB_HALT) == -1) <== reboot(2)が呼び出されている
printf("%% reboot: RB_HALT: %s\n", strerror(errno));
return(0);
}
/etc/rc.shutdownが呼び出されないのは、nshがreboot(2)を直接呼出してOSの停止処理を行っているため。
**改修 [#s8960891]
ports treeを展開し、/usr/ports/shells/nsh 内にパッチファイルを追加
/usr/ports/shell/nsh/patches/patch-commands_c
''/usr/ports/shell/nsh/patches/patch-ctl_c''
--- ctl.c.orig Tue Sep 20 04:18:55 2022
+++ ctl.c Tue Nov 22 09:37:12 2022
@@ -412,7 +412,7 @@
char *ctl_ntp_test[] = { NTPD, "-nf", REQTEMP, NULL };
struct ctl ctl_ntp[] = {
{ "enable", "enable service",
- { NTPD, "-sf", REQTEMP, NULL }, NULL, DB_X_ENABLE, T_EXEC },
+ { NTPD, "-f", REQTEMP, NULL }, NULL, DB_X_ENABLE, T_EXEC },
{ "disable", "disable service",
{ PKILL, table, "ntpd", NULL }, NULL, DB_X_DISABLE, T_EXEC },
{ "edit", "edit configuration",
''/usr/ports/shell/nsh/patches/patch-commands_c''
--- commands.c.orig Tue Sep 20 04:18:55 2022
+++ commands.c Tue Nov 22 09:37:12 2022
@@ -1962,7 +1962,7 @@
nreboot(void)
{
printf ("%% Reboot initiated\n");
- if (reboot (RB_AUTOBOOT) == -1)
+ if (system("/sbin/reboot") == -1)
printf("%% reboot: RB_AUTOBOOT: %s\n", strerror(errno));
return(0);
}
@@ -1971,7 +1971,7 @@
halt(void)
{
printf ("%% Shutdown initiated\n");
- if (reboot (RB_HALT) == -1)
+ if (system("/sbin/halt -p") == -1)
printf("%% reboot: RB_HALT: %s\n", strerror(errno));
return(0);
}
/usr/ports/shell/nsh/patches/patch-ctl_c
--- ctl.c.orig Tue Sep 20 04:18:55 2022
+++ ctl.c Tue Nov 22 09:37:12 2022
@@ -412,7 +412,7 @@
char *ctl_ntp_test[] = { NTPD, "-nf", REQTEMP, NULL };
struct ctl ctl_ntp[] = {
{ "enable", "enable service",
- { NTPD, "-sf", REQTEMP, NULL }, NULL, DB_X_ENABLE, T_EXEC },
+ { NTPD, "-f", REQTEMP, NULL }, NULL, DB_X_ENABLE, T_EXEC },
{ "disable", "disable service",
{ PKILL, table, "ntpd", NULL }, NULL, DB_X_DISABLE, T_EXEC },
{ "edit", "edit configuration",
portsにてパッチを適用し、ビルド
nshrouter# pkg_delete nsh
nsh-1.0.20220919:ok
Read shared items:ok
nshrouter# cd /usr/ports/shells/nsh
nshrouter# make install
===> Checking files for nsh-1.0.20220919
>> Fetch https://github.com/yellowman/nsh/archive/fcad0f6af197ab0c96e2c5410c....
>> (SHA256) nsh-1.0.20220919-fcad0f6a.tar.gz: OK
===> nsh-1.0.20220919 depends on: sqlite3-* -> sqlite3-3.39.3
===> Verifying specs: c curses edit sqlite3
===> found c.96.2 curses.14.0 edit.5.2 sqlite3.37.20
===> Extracting for nsh-1.0.20220919
===> Patching for nsh-1.0.20220919
===> Applying OpenBSD patch patch-commands_c
Hmm... Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|--- commands.c.orig Tue Sep 20 04:18:55 2022
|+++ commands.c Tue Nov 22 09:37:12 2022
--------------------------
Patching file commands.c using Plan A...
Hunk #1 succeeded at 1962.
Hunk #2 succeeded at 1971.
done
===> Applying OpenBSD patch patch-ctl_c
Hmm... Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|--- ctl.c.orig Tue Sep 20 04:18:55 2022
|+++ ctl.c Tue Nov 22 09:37:12 2022
--------------------------
Patching file ctl.c using Plan A...
Hunk #1 succeeded at 412.
done
===> Compiler link: clang -> /usr/bin/clang
===> Compiler link: clang++ -> /usr/bin/clang++
===> Compiler link: cc -> /usr/bin/cc
===> Compiler link: c++ -> /usr/bin/c++
===> Generating configure for nsh-1.0.20220919
===> Configuring for nsh-1.0.20220919
===> Building for nsh-1.0.20220919
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast ....
sh /ram/usr/ports/pobj/nsh-1.0.20220919/nsh-fcad0f6af197ab0c96e2c5410....c546ad90027f7a1/compile.sh
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c compile.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c main.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c genget.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c commands.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c stats.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c kroute.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c ctl.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c show.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c if.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c version.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c route.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c conf.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c complete.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c ieee80211.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c bridge.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c tunnel.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c media.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c sysctl.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c passwd.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c pfsync.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c carp.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c trunk.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c who.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c more.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c stringlist.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c utils.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c sqlite3.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c ppp.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c nopt.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c pflow.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c wg.c
cc -L/usr/local/lib -o nsh arp.o compile.o main.o genget.o commands.o stats.o kroute.o ctl.o show.o if.o version.o route.o conf.o complete.o ieee80211.o bridge.o tunnel.o media.o sysctl.o passwd.o pfsync.o carp.o trunk.o who.o more.o stringlist.o utils.o sqlite3.o ppp.o nopt.o pflow.o wg.o -ledit -ltermcap -lsqlite3 -L/usr/local/lib
===> Faking installation for nsh-1.0.20220919
/usr/ports/pobj/nsh-1.0.20220919/bin/install -c -s -m 755 /usr/ports/pobj/nsh-1.0.20220919/nsh-fcad0f6af197ab0c96e2c5410c546ad90027f7a1/nsh /usr/ports/pobj/nsh-1.0.20220919/fake-amd64/usr/local/bin
/usr/ports/pobj/nsh-1.0.20220919/bin/install -c -m 644 /usr/ports/pobj/nsh-1.0.20220919/nsh-fcad0f6af197ab0c96e2c5410c546ad90027f7a1/nsh.8 /usr/ports/pobj/nsh-1.0.20220919/fake-amd64/usr/local/man/man8/
/usr/ports/pobj/nsh-1.0.20220919/bin/install -c -m 755 /usr/ports/pobj/nsh-1.0.20220919/nsh-fcad0f6af197ab0c96e2c5410c546ad90027f7a1/save-ro.sh /usr/ports/pobj/nsh-1.0.20220919/fake-amd64/usr/local/bin
/usr/ports/pobj/nsh-1.0.20220919/bin/install -c -m 755 /usr/ports/pobj/nsh-1.0.20220919/nsh-fcad0f6af197ab0c96e2c5410c546ad90027f7a1/save-rw.sh /usr/ports/pobj/nsh-1.0.20220919/fake-amd64/usr/local/bin
/usr/ports/pobj/nsh-1.0.20220919/bin/install -d -m 755 /usr/ports/pobj/nsh-1.0.20220919/fake-amd64/usr/local/share/doc/nsh
sed -i s,/usr/local,/usr/local,g /usr/ports/pobj/nsh-1.0.20220919/nsh-fcad0f6af197ab0c96e2c5410c546ad90027f7a1/MANUAL
/usr/ports/pobj/nsh-1.0.20220919/bin/install -c -m 644 /usr/ports/pobj/nsh-1.0.20220919/nsh-fcad0f6af197ab0c96e2c5410c546ad90027f7a1/MANUAL /usr/ports/pobj/nsh-1.0.20220919/fake-amd64/usr/local/share/doc/nsh/
/usr/ports/pobj/nsh-1.0.20220919/bin/install -c -m 644 /usr/ports/pobj/nsh-1.0.20220919/nsh-fcad0f6af197ab0c96e2c5410c546ad90027f7a1/README /usr/ports/pobj/nsh-1.0.20220919/fake-amd64/usr/local/share/doc/nsh/
/usr/ports/pobj/nsh-1.0.20220919/bin/install -c -m 644 /usr/ports/pobj/nsh-1.0.20220919/nsh-fcad0f6af197ab0c96e2c5410c546ad90027f7a1/TODO /usr/ports/pobj/nsh-1.0.20220919/fake-amd64/usr/local/share/doc/nsh/
/usr/ports/pobj/nsh-1.0.20220919/bin/install -c -m 644 /usr/ports/pobj/nsh-1.0.20220919/nsh-fcad0f6af197ab0c96e2c5410c546ad90027f7a1/COPYRIGHT /usr/ports/pobj/nsh-1.0.20220919/fake-amd64/usr/local/share/doc/nsh/
===> Building package for nsh-1.0.20220919
Create /usr/ports/packages/amd64/all/nsh-1.0.20220919.tgz
Creating package nsh-1.0.20220919
KLink*to*/usr/ports/packages/amd64/ftp/nsh-1.0.20220919.tgz%K%K1%KK|K72%K
===> Verifying specs: c curses edit sqlite3
===> found c.96.2 curses.14.0 edit.5.2 sqlite3.37.20
===> Installing nsh-1.0.20220919 from /usr/ports/packages/amd64/all/
nsh-1.0.20220919:9okK************** | 72%K | 0%K
nshrouter# nsh
% NSH v1.0
nshrouter.local/enable
*まとめ [#eca6fa7b]