- The added line is THIS COLOR.
- The deleted line is THIS COLOR.
#author("2022-11-24T16:50:22+09:00","default:kaw","kaw")
#author("2022-12-13T18:22:29+09:00","default:kaw","kaw")
#topicpath
*河豚板でルータを作る ~ アプライアンスの製作例 [#f11d5afe]
*河豚板でルータを作る ~ アプライアンスの製作例
RIGHT:EBUG 第83回会合 2022年11月26日 ~
川俣吉広、kaw@on.rim.or.jp
*概要 [#cbab9318]
*概要
EBUGの勉強会では、2014年5月に[[実用で使う河豚板>EBUG勉強会/20140507_実用で使う河豚板]]と題して特定のアプリケーションを動かすための専用機(時計表示端末)に仕立てる方法を紹介した。
今回はnsh (network config shell)の河豚板への組み込みを例にとり、現行バージョンの河豚板を用いたアプライアンスの製作手順を紹介する。
今回はNSH (network config shell)の河豚板への組み込みを例にとり、現行バージョンの河豚板 7.2を用いたアプライアンスの製作手順を紹介する。
**作業の流れ [#w6035d6a]
**作業の流れ
導入作業の全体の流れは下図の通り:
初回起動 +-----------------------+ モード0で起動し、
[LiveUSBの作成]-->[起動(モード0)]-->|河豚板の設定: |--+ OpenBSDの設定
手動 | 終了時のファイル保存 | | 河豚板の設定
初回起動 +-----------------------+ モード0で起動し、
[LiveUSBの作成]-->[起動(モード0)]-->|河豚板の設定: |--+ OpenBSDの設定
手動 | 終了時のファイル保存 | | 河豚板の設定
| 起動時の自動読込 | |
| etc... | |
+-----------------------+ |
|
+--------------------[reboot]---------------------+
|
| 2回目の起動 +-----------------------+ nsh関連の設定
+-->[起動(モード3)]-->|nshのインストール・設定|--+ インストール
自動 +-----------------------+ | ユーザアカウント
| 作成
| 2回目の起動 +-----------------------+ NSH関連の設定
+-->[起動(モード3)]-->|NSHのインストール・設定|--+ インストール
自動 +-----------------------+ | ユーザアカウント作成
| タイムゾーン
+--------------------[reboot]---------------------+
|
| 3回目以降の起動 +-----------------------+ nshを運用しながら、
Power On----->+-->[起動(モード3)]-->|nshの運用 |--+ 設定の修正・調整を
^ 自動 +-----------------------+ | 実施
| 3回目以降の起動 +-----------------------+ NSHを運用しながら、
Power On----->+-->[起動(モード3)]-->|NSHの運用 |--+ 設定の修正・調整を実施
^ 自動 +-----------------------+ |
| |
Power Off<----+--------------------[halt or reboot]-------------+
**nshについて [#gd288132]
**NSHについて
プロジェクトホームページ: https://www.nmedia.net/nsh/ より
>'''NSH は、OpenBSD ベースのネットワークアプライアンスを対象とした CLI です。これは ifconfig, sysctl および route を独自のシンプルなコマンド言語と置き換えるもので 他のデーモンのコンフィギュレーションをひとつの場所にカプセル化し、効果的に アプライアンススタイルで使用するために /etc/netstart と /etc/rc の一部を置き換えています。'''~
'''nshによってカプセル化されたデーモンとサービス: pf, ospfd, ospf6d, bgpd, ripd, ldpd, relayd, ipsecctl, iked, rad.Dvmrpd, sdpf6d, bgpd, ripd, ldpd, relayd, ipsecctl, iked, rad, dvmrpd, sasyncd, dhcpd, snmpd, sshd, ntpd, ifstated, tftp-proxy, ftp-proxy, tftpd, npppd, tftpd, npppd, tftp-proxy, ftp-proxy, tftpd、npppd、resolv.conf、inetd、smtpd、ldapd、ifstated'''
-GitHubリポジトリ: https://github.com/yellowman/nsh
-紹介動画: [[nsh: Network Shell on top of OpenBSD made for network administrators>https://www.youtube.com/watch?v=WMKxIHaWaG0]] (EuroBSDcon 2022)
期間限定で以下のリンクを作成した
-オンラインマニュアル: https://home.fuguita.org/nsh.8.html ~
([[自動翻訳版>https://home-fuguita-org.translate.goog/nsh.8.html?_x_tr_sl=en&_x_tr_tl=ja&_x_tr_hl=ja&_x_tr_pto=wapp]])
作者のChris Cappuccio氏はまた、フラッシュデバイスで動作するOpenBSDイメージを作成する[[flashrd>https://www.nmedia.net/flashrd/]]の作者でもある。
----
#contents
*LiveUSB版河豚板を作成 [#n97624f3]
**ダウンロード [#wa1f8fa3]
*LiveUSB版河豚板を作成
**ダウンロード
[[ダウンロードミラー一覧>FuguIta/Download]]からよさげな場所を選んでダウンロード
# ftp https://jp2.dl.fuguita.org/SHA256
Trying 160.16.199.59...
Requesting https://jp2.dl.fuguita.org/SHA256
100% |*******************************************************| 640 00:00
640 bytes received in 0.00 seconds (2.65 MB/s)
# ftp https://jp2.dl.fuguita.org/FuguIta-7.2-amd64-202211151.img.gz
Trying 160.16.199.59...
Requesting https://jp2.dl.fuguita.org/FuguIta-7.2-amd64-202211151.img.gz
100% |*******************************************************| 332 MB 00:32
348583114 bytes received in 32.14 seconds (10.34 MB/s)
**ファイルの整合性チェック [#g03c034c]
**ファイルの整合性チェック
MD5かSHA256のいずれかを用いてダウンロードしたファイルが壊れていないかチェックする。以下はSHA256の例:
# sha256 -C SHA256 FuguIta-7.2-amd64-202211151.img.gz
(SHA256) FuguIta-7.2-amd64-202211151.img.gz: OK
**デバイスに書込み [#w0dbe3e1]
**デバイスに書込み
# zcat FuguIta-7.2-amd64-nsh_test.img.gz | dd of=/dev/rsdXc bs=1m
/dev/rsdXcには適宜デバイス名を充当して実行。
*初回起ち上げ [#i7f54524]
**システムデバイスの指定 [#y868bd2e]
*初回起ち上げ
**システムデバイスの指定
scanning partitions: sd0a sd0d sd0i
FuguIta's operating device(s): sd0a.
Which is FuguIta's operating device? [default: sd0a] ->
河豚板デバイスを一つだけ装着しているので、デフォルト(ENTERのみ押下)でOK。
**MFSサイズの指定 [#u9ef51ad]
**MFSサイズの指定
available memory: 2031M
Enter mfs size.
You can add suffix K, M, or G.
% is a percentage of memory size.
and %% is a percentage of the total memory and swap.
otherwise considered "megabytes"
[default: 1523M] ->
set mfs size to 1523MB
デフォルトでは、実装メモリの75%をMFSに割り当てる。~
(実測したところ、物理メモリは192MB程度以上実装されていれば使用可能となった)
**起動モードの指定 [#b4a16750]
起動モード0で起動。~
モード1での起動も可。この場合、運用中は完オン・メモリで動作する。
**起動モードの指定
LiveUSBの標準的なモードである起動モード0で起動。
Boot modes:
0: fresh boot - standard mode as a live system
1: fresh boot - less memory, faster boot
(/usr is non-writable, can't pkg_add)
2: fresh boot - works using only RAM
(about 1GB or more of RAM required)
3: boot with retrieving saved files from storage device
or enter passphrase for an encrypted volume
4: boot with retrieving saved files from floppy disk
5: interactive shell for maintenance
-> 0
Running manual setup.
モード2での起動も可。この場合、運用中は完オン・メモリで動作する。
**rootパスワード [#ibee2606]
この後、OSが動作するための基本的な設定について訊かれてゆくので、適宜力してゆく。
**rootパスワード
Changing password for root.
New password:
Retype new password:
passwd: password updated successfully
簡単すぎるパスワードは弾かれるので注意。
**ネットワーク関連の設定 [#lf7dacc4]
**ネットワーク関連の設定
ここでの設定は、河豚板をネットワーククライアントとして使用することを想定している。
今回、ルータなどとしての使用を想定しているので、複数のネットワークインターフェースとその間のフォワーディングなどに関する設定を追加する必要がある。~
それらの設定は、起動後にrootでログインして行うか、あるいはnshで行う。
それらの設定は、起動後にrootでログインして行うか、あるいはNSHで行う。
***ホスト名 [#e1fa4ae0]
***ホスト名
Hostname with domain part (FQDN):
only host name without domain part is also OK.
-> nshrouter.local
***IPバージョン [#z0417cd1]
***IPバージョン
今回はIPv4のみでの運用を想定
IP protocol version(s) to be enabled: 4, 6, 46, 64 or "none"
4: enable only IPv4
6: enable only IPv6
46: give priority to IPv4 name resolution
64: give priority to IPv6 name resolution
none: operate as standalone
[64] ->4
***ネットワークインターフェース [#s3ddee1c]
***ネットワークインターフェース
Network Interfaces: Choose one
NIC type Name
-------- ----- ------------
vio0 ether unknown
[vio0] ->
***IPアドレス、デフォルトルート [#e464cca4]
***IPアドレス、デフォルトルート
IPv4 - address and routing:
Enter "auto" or "IPv4_address[/mask] [default_gateway]"
"auto" is an automatic setting by DHCP.
The "/mask" part can be specified in either format,
such as "/255.255.255.0" or "/24".
If there is no default gateway,
set the second field to "none" or leave it blank.
[auto] -> 100.64.1.3/31 100.64.1.2
***ネームサーバ [#r48f19fb]
***ネームサーバ
DNS servers: up to 3 IP addresses, separated by spaces
-> 9.9.9.9
**ログイン方法 [#m74b7f13]
**ログイン方法
Do you login with C)onsole or X) Window System?
[default: C] ->
この後、OpenBSD本来のブートシーケンスが続き、最後にログインプロンプトが表示される。
*ルートでログインして諸設定 [#if05b470]
**タイムゾーン [#qe6320c8]
*ルートでログインして諸設定
起動が完了し、ログインプロンプトが表示されたら、ほど設定したパスワードを用いてrootでログインし、以降の作業を行う。
**タイムゾーン
nshrouter# date
Tue Nov 22 05:28:53 UTC 2022
nshrouter# ln -sf usr/share/zoneinfo/Asia/Tokyo /etc/localtime
nshrouter# date
Tue Nov 22 14:29:02 JST 2022
**シャットダウン時のファイル自動保存 [#w32703d4]
**シャットダウン時のファイル自動保存
河豚板では、MFS上のデータをUSBメモリ等に保存するにはusbfadmというユティリティを使うが、/etc/rc.shutdownを以下のように編集することでシャットダウン時にusbfadmを実行し、自動的に保存を行うようになる。
nshrouter# vi /etc/rc.shutdown
force_umount=No # set Yes for forced umount /ram at shutdown
force_resync=Yes # set Yes to re-sync at shutdown <== これをYesに変更
# stop_all_daemons - to eliminate all daemons at umount /ram
#
stop_all_daemons () {
:
:
**起動時の設定の自動化 [#c09ecea1]
USBメモリのnoasksというファイルを編集することにより、起動時に手動で入力していた設定が自動化される。
**起動時の設定の自動化
USBメモリのnoasksというファイルを編集することにより、起動時に手動で入力していた設定が自動化される。~
前回の終了時に保存したファイルの読み込みも、このnoasksで指定する。
nshrouter# mount /dev/sd0d /mnt
nshrouter# vi /mnt/livecd-config/7.2/amd64/noasks
#
# noasks - parameter settings for non-interactive boot
#
# Make statements uncommented
# Then assign real values
#
#
# FuguIta system device
# - Use one of two lines
#noask_rdev=sd0a # device name format
noask_rdev=3b5447abd772121d.a # DUID format <==河豚板のシステムデバイス
# 常に同じデバイスを指定できる
# mfs size in MB ので、DUID (Disklabel Unique ID)
noask_umem=75% <==MFSのサイズ による指定を推奨
#
# boot mode
noask_setup_rw_mode=3 <==起動モード 3=保存されたファイルを読み込んで起動
#
# storage device
# - Use one of two lines
#noask_confdev=sd0d # device name format
noask_confdev=3b5447abd772121d.d # DUID format <==ファイルを読み込むデバイス
# noask_rdevと同じくDUID推奨
# data set name in USB flash drive
noask_confdir=nshrouter <==読み込むファイルの保存名
nshrouter# umount /mnt
*リブートの動作確認 [#wa516f7a]
**ここまでの設定をとりあえず保存 [#j7424422]
*リブートの動作確認
**ここまでの設定をとりあえず保存
usbfadmを起動し、保存先、保存名を指定して保存を実行
nshrouter# usbfadm
Welcome to usbfadm.
USB flash drive administration tool for FuguIta
Version/Arch: 7.2/amd64 (FuguIta-7.2-amd64-202211151)
Boot mode: manual
Target device: not set
Data saved as: not set
readline capability available
TAB to complete the reserved words
Type ? for help.
? : ? ->target
Searching storage device
Please make sure the device inserted.
Then press ENTER ->
sd0a +sd0d
target device->sd0d
sd0d : ? ->saveas
Name of saved data->nshrouter
Your data will be saved as ``nshrouter''.
sd0d : nshrouter ->sync
Sync current mfs as ``nshrouter'' , OK? [y/N] -> y
34.4MiB 0:00:04 [8.57MiB/s] [=================================]105% ETA 0:00:00
waiting for pax to finish ... syncing ... done.
sd0d : nshrouter ->quit
Bye bye...
nshrouter#
**リブート [#pca19e77]
**リブート
nshrouter# reboot
チェック項目
-シャットダウン時にファイルが自動保存されるか?
-再起動時に自動で立ち上がるか?
-再起動完了後、保存時の環境が復帰されているか?
*nsh関連の設定 [#h311791c]
**nshのインストール [#x4962962]
*NSH関連の設定
**NSHのインストール
packagesからインストールする
nshrouter# pkg_add nsh
quirks-6.42(signed) 2022-11-20T19:34:54Z
quirks-6.42:ok
Ambiguous:
a 0: <None>
1: nsh-1.0.20220919
2: nsh-1.0.20220919-static
Your choice: 1
nsh-1.0.20220919:ok
nshrouter# nsh
% NSH v1.0
nshrouter.local/quit
% Session terminated.
nshrouter#
nsh-1.0.20220919-staticは、nshの静的リンク版(chrootして実行したい時などに使用?)。
nsh-1.0.20220919-staticは、NSHの静的リンク版(chrootして実行したい時などに使用?)。
注: 時計がずれているとTLS通信が失敗し、pkg_addが不成功に終わる場合がある。その場合は、dateコマンドを用い、手動で時刻合わせをするか、あるいは、
nshrouter# rdate ntp.nict.jp
などとして時刻を合わせる。
**nshの実行アカウントを作成 [#h58613ed]
**NSHの実行アカウントを作成
adduserコマンドは初回実行時、adduser.confの作成について色々訊かれるが、全部デフォルト(ENTER押下)でよい。
nshrouter# adduser nsh
Couldn't find /etc/adduser.conf: creating a new adduser configuration file
Reading /etc/shells
Enter your default shell: csh ksh nologin nsh sh [ksh]:
Your default shell is: ksh -> /bin/ksh
Default login class: authpf bgpd daemon default pbuild staff unbound vmd xenodm
[default]:
Enter your default HOME partition: [/home]:
Copy dotfiles from: /etc/skel no [/etc/skel]:
Send welcome message?: /path/file default no [no]:
Do not send message(s)
Prompt for passwords by default (y/n) [y]:
Default encryption method for passwords: auto blowfish [auto]:
Use option ``-silent'' if you don't want to see all warnings and questions.
Reading /etc/shells
Check /etc/master.passwd
Check /etc/group
Ok, let's go.
Don't worry about mistakes. There will be a chance later to correct any input.
Enter username []: nsh
Enter full name []: Network SHell
Enter shell csh ksh nologin nsh sh [ksh]:
Uid [1000]:
Login group nsh [nsh]:
Login group is ``nsh''. Invite nsh into other groups: guest no
[no]: wheel
Login class authpf bgpd daemon default pbuild staff unbound vmd xenodm
[default]:
Enter password []:
Enter password again []:
Name: nsh
Password: ****
Fullname: Network SHell
Uid: 1000
Gid: 1000 (nsh)
Groups: nsh wheel
Login Class: default
HOME: /home/nsh
Shell: /bin/ksh
OK? (y/n) [y]: y
Added user ``nsh''
Copy files from /etc/skel to /home/nsh
Add another user? (y/n) [y]: n
Goodbye!
nshrouter# exit
OpenBSD/amd64 (nshrouter.local) (tty00)
login: nsh
Password:
nshはroot権限でコマンドを実行するので、nshアカウントはwheelグループに所属させておく。
NSHはroot権限でコマンドを実行するので、nshアカウントはwheelグループに所属させておく。
***/home/nsh/.profileの編集 [#p7452927]
ログイン直後にroot権限でnshが実行されるようにする。
***/home/nsh/.profileの編集
ログイン直後にroot権限でNSHが実行されるようにする。
nshrouter$ vi ~/.profile
exec doas /usr/local/bin/nsh
exit # for fail safe
pkg_addでnshをインストールすると、/etc/shellsにnshが登録されるので、これをログインシェルとしてもいいような気もするが、マニュアルページではこの方法は推奨されていない。~
pkg_addでNSHをインストールすると、/etc/shellsにnshが登録されるので、これをログインシェルとしてもいいような気もするが、マニュアルページではこの方法は推奨されていない。~
>nsh(8) Section 7 > Adding system users to:~
'''Do NOT add nwrapper (or nsh) to /etc/shells. They should not be entered here.'''
***/etc/doas.confの編集 [#rc995110]
***/etc/doas.confの編集
ユーザnshがパスワード無しでroot権限のnshを実行できるように設定
nshrouter# echo permit nopass nsh cmd /usr/local/bin/nsh > /etc/doas.conf
***設定の保存 [#pd630abd]
***設定の保存
以上で、ユーザアカウントnshでログインするとnshが起動するようになった。
念の為、ここまでの状態をUSBメモリに保存しておく
nshrouter# usbfadm -r
========================================
= Sync /dev/sd0d with current mfs as nshrouter
=
sending incremental file list
etc/fstab
154 100% 0.00kB/s 0:00:00 (xfr#1, ir-chk=1078/1094)
:
:
var/spool/smtpd/purge/2135993693/
var/spool/smtpd/temporary/
nshrouter#
一度、保存を行っている場合はコマンドラインから usbfadm -r で保存を再実行できる。
データ保存の初回実行時はpaxを使用し、次回からはrsyncによる差分転送を行う。
*トラブルシューティング [#j2f3f283]
**OpenNTPDの設定で警告が出る [#s348a0e8]
*トラブルシューティング
**OpenNTPDの設定で警告が出る
% NSH v1.0
nshrouter.local/enable
nshrouter.local(p)/ntp edit
servers ntp.nict.jp
configuration OK
nshrouter.local(p)/ntp disable
-s option no longer works and will be removed soon. <== ntpdの -s オプションは古いので
Please reconfigure to use constraints or trusted servers. ntpdがこの警告を出す。
nshrouter.local(p)/ntp enable
-s option no longer works and will be removed soon.
Please reconfigure to use constraints or trusted servers.
nshrouter.local(p)/!ntpctl -s all <== ntpdの同期状態は、ntpctlコマンドを子プロセスとして
0/5 peers valid, clock unsynced 呼出し、確認する。
peer
wt tl st next poll offset delay jitter
133.243.238.163 from pool ntp.nict.jp
1 3 1 2s 5s ---- peer not valid ----
133.243.238.164 from pool ntp.nict.jp
1 3 1 4s 7s ---- peer not valid ----
61.205.120.130 from pool ntp.nict.jp
1 3 1 2s 5s ---- peer not valid ----
133.243.238.243 from pool ntp.nict.jp
1 3 1 2s 5s ---- peer not valid ----
133.243.238.244 from pool ntp.nict.jp
1 3 1 3s 6s ---- peer not valid ----
nshrouter.local(p)/
NTPの参照サーバがntp.pool.orgからntp.nict.jpに変っているので、設定変更自体は反映されている。
**nshからreboot/haltでファイルが自動保存されない [#yb6d3791]
**nshからreboot/haltでファイルが自動保存されない
nshrouter.local(p)/reboot <= nshの特権モードでrebootを実行
% Reboot initiated
syncing disks... done <= ファイルが自動保存されず、いきなりreboot
vmmci0: powerdown /etc/rc.shutdownが実行されない
rebooting...
Using drive 0, partition 3.
Loading......
probing: pc0 com0 mem[638K 2046M a20=on]
disk: hd0+
>> OpenBSD/amd64 BOOT 3.55/*
nshのソースで該当部分を見てみる~
これに関しては、マニュアルページにも以下のような記述がある。
>reboot~
Restart the system. Warning no confirmation prompt is issued, configuration changes are NOT automatically saved! User must save configuration manually BEFORE using reboot. Requires privileged access.
NSHのソースで該当部分を見てみる~
''commands.c''
/*
* Reboot
*/
int
nreboot(void)
{
printf ("%% Reboot initiated\n");
if (reboot (RB_AUTOBOOT) == -1) <== reboot(2)が呼び出されている
printf("%% reboot: RB_AUTOBOOT: %s\n", strerror(errno));
return(0);
}
int
halt(void)
{
printf ("%% Shutdown initiated\n");
if (reboot (RB_HALT) == -1) <== reboot(2)が呼び出されている
printf("%% reboot: RB_HALT: %s\n", strerror(errno));
return(0);
}
/etc/rc.shutdownが呼び出されないのは、nshがreboot(2)を直接呼出してOSの停止処理を行っているため。
**改修 [#s8960891]
NSHからwrite-configでファイルに書き出した設定は河豚板ではMFS上に載っているので、いきなりリブートすると、この設定が保存されず都合が悪い。~
シャットダウン時に/etc/rc.shutdownが実行されるようにする要がある。
**改修
ports treeを展開し、/usr/ports/shells/nsh 内にパッチファイルを追加
''/usr/ports/shell/nsh/patches/patch-ctl_c''
--- ctl.c.orig Tue Sep 20 04:18:55 2022
+++ ctl.c Tue Nov 22 09:37:12 2022
@@ -412,7 +412,7 @@
char *ctl_ntp_test[] = { NTPD, "-nf", REQTEMP, NULL };
struct ctl ctl_ntp[] = {
{ "enable", "enable service",
- { NTPD, "-sf", REQTEMP, NULL }, NULL, DB_X_ENABLE, T_EXEC },
+ { NTPD, "-f", REQTEMP, NULL }, NULL, DB_X_ENABLE, T_EXEC },
{ "disable", "disable service",
{ PKILL, table, "ntpd", NULL }, NULL, DB_X_DISABLE, T_EXEC },
{ "edit", "edit configuration",
''/usr/ports/shell/nsh/patches/patch-commands_c''
--- commands.c.orig Tue Sep 20 04:18:55 2022
+++ commands.c Tue Nov 22 09:37:12 2022
@@ -1962,7 +1962,7 @@
nreboot(void)
{
printf ("%% Reboot initiated\n");
- if (reboot (RB_AUTOBOOT) == -1)
+ if (system("/sbin/reboot") == -1)
printf("%% reboot: RB_AUTOBOOT: %s\n", strerror(errno));
return(0);
}
@@ -1971,7 +1971,7 @@
halt(void)
{
printf ("%% Shutdown initiated\n");
- if (reboot (RB_HALT) == -1)
+ if (system("/sbin/halt -p") == -1)
printf("%% reboot: RB_HALT: %s\n", strerror(errno));
return(0);
}
portsにてパッチを適用し、ビルド
nshrouter# pkg_delete nsh
nsh-1.0.20220919:ok
Read shared items:ok
nshrouter# cd /usr/ports/shells/nsh
nshrouter# make install
===> Checking files for nsh-1.0.20220919
>> Fetch https://github.com/yellowman/nsh/archive/fcad0f6af197ab0c96e2c5410c....
>> (SHA256) nsh-1.0.20220919-fcad0f6a.tar.gz: OK
===> nsh-1.0.20220919 depends on: sqlite3-* -> sqlite3-3.39.3
===> Verifying specs: c curses edit sqlite3
===> found c.96.2 curses.14.0 edit.5.2 sqlite3.37.20
===> Extracting for nsh-1.0.20220919
===> Patching for nsh-1.0.20220919
===> Patching for nsh-1.0.20220919 <== 今ほど追加したパッチが適用されている
===> Applying OpenBSD patch patch-commands_c
Hmm... Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|--- commands.c.orig Tue Sep 20 04:18:55 2022
|+++ commands.c Tue Nov 22 09:37:12 2022
--------------------------
Patching file commands.c using Plan A...
Hunk #1 succeeded at 1962.
Hunk #2 succeeded at 1971.
done
===> Applying OpenBSD patch patch-ctl_c
Hmm... Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|--- ctl.c.orig Tue Sep 20 04:18:55 2022
|+++ ctl.c Tue Nov 22 09:37:12 2022
--------------------------
Patching file ctl.c using Plan A...
Hunk #1 succeeded at 412.
done
===> Compiler link: clang -> /usr/bin/clang
===> Compiler link: clang++ -> /usr/bin/clang++
===> Compiler link: cc -> /usr/bin/cc
===> Compiler link: c++ -> /usr/bin/c++
===> Generating configure for nsh-1.0.20220919
===> Configuring for nsh-1.0.20220919
===> Building for nsh-1.0.20220919
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast ....
sh /ram/usr/ports/pobj/nsh-1.0.20220919/nsh-fcad0f6af197ab0c96e2c5410....
:
:
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast ....
cc -L/usr/local/lib -o nsh arp.o compile.o main.o genget.o commands ....
===> Faking installation for nsh-1.0.20220919
/usr/ports/pobj/nsh-1.0.20220919/bin/install -c -s -m 755 /usr/ports ....
===> Building package for nsh-1.0.20220919
Create /usr/ports/packages/amd64/all/nsh-1.0.20220919.tgz
:
:
Link to /usr/ports/packages/amd64/ftp/nsh-1.0.20220919.tgz
===> Verifying specs: c curses edit sqlite3
===> found c.96.2 curses.14.0 edit.5.2 sqlite3.37.20
===> Installing nsh-1.0.20220919 from /usr/ports/packages/amd64/all/
nsh-1.0.20220919:9ok
nshrouter# nsh
% NSH v1.0
nshrouter.local/enable
*雑感 [#eca6fa7b]
nshの利用についてはここまでで、ネットワーク機能の本格的な設定はこれから。
*雑感
NSHの利用についてはここまでで、ネットワーク機能の本格的な設定はこれから。
***nshの初期化について [#x5785e02]
**nshの初期化について
''write-config''を実行すると/etc/nshrcに設定が保存される。マニュアルでは、
'''On the next startup of the system, this saved configuration is used.'''
という記述があるが、次の起動では保存された設定は反映されない。
nshの2つのコマンドラインオプション、
:-c '''config-script-file'''|''nsh'' execute the command(s) in the '''config-script-file'''. This is typically used to implement scripted changes to configuration.
:-i '''rcfile'''|load the inital system configuration from the command(s) in the '''rcfile'''. This is typically used to clear the configuration load a full ''nsh'' configuration script from '''rcfile''' .
を指定しても、ファイルのnshコマンドを実行した後、終了する。
を指定しても、ファイルのnshコマンドを実行した後、終了する。~
''/etc/nshrc''は以下のように記述した方がよいかもしれない。
if [ -r /etc/nshrc ]; then
doas /usr/local/bin/nsh -i /etc/nshrc
fi
exec doas /usr/local/bin/nsh
exit # fail safe
**専用機の構築手順について [#je3f8b61]
設定手順の[[ダウンロード>#wa1f8fa3]]から[[起動時の設定の自動化>#c09ecea1]]までは、河豚板でなにがしかのシステムを構築する場合の定石。以下の事例でもこの手順に従っている。
**この構築手順を用いた他の事例
設定手順の[[ダウンロード>#wa1f8fa3]]から[[起動時の設定の自動化>#c09ecea1]]までは、河豚板でなにがしかのシステムを構築する場合の定石。~
以下の事例でもこの手順に従ってシステムを構築している。
-Qiita [[OpenBSDライブシステム「河豚板」の日本語デスクトップ環境を構築する>https://qiita.com/ykaw/items/ca008a34d73d5f1f6dd8]]
-Qiita: [[OpenBSDライブシステム「河豚板」の日本語デスクトップ環境を構築する>https://qiita.com/ykaw/items/ca008a34d73d5f1f6dd8]]
-[[How to port PFFW to FuguIta>FuguIta/BBS#r9e5ee9b]]
-[[Desktop environment demo of FuguIta>FuguIta/BBS#r9e5ee9b]]
-[[isotop on FuguIta>FuguIta/BBS/10#vc6211a3]]
**関連報 [#zfbc39d5]
-[[温度測定システム>https://twitter.com/yoshi_kaw/status/1534358055101485056]]
*関連報
-[[河豚板ガイド]]
-[[FuguIta Start Guide>FuguIta/StartGuide]]
-YouTube: [[Basic settings for FuguIta (OpenBSD-based Live System)>https://www.youtube.com/watch?v=zyz2Ukcx68Q]]
----
#topicpath