- The added line is THIS COLOR.
- The deleted line is THIS COLOR.
#author("2022-11-22T17:50:24+09:00","default:kaw","kaw")
#author("2022-12-13T18:22:29+09:00","default:kaw","kaw")
#topicpath
*河豚板でルータを作る ~ アプライアンスの製作例 [#f11d5afe]
*河豚板でルータを作る ~ アプライアンスの製作例
RIGHT:EBUG 第83回会合 2022年11月26日 ~
川俣吉広、kaw@on.rim.or.jp
*概要 [#cbab9318]
*概要
EBUGの勉強会では、2014年5月に[[実用で使う河豚板>EBUG勉強会/20140507_実用で使う河豚板]]と題して特定のアプリケーションを動かすための専用機(時計表示端末)に仕立てる方法を紹介した。
今回はnsh (network config shell)の河豚板への組み込みを例にとり、現行バージョンの河豚板を用いたアプライアンスの製作方法を紹介する。
今回はNSH (network config shell)の河豚板への組み込みを例にとり、現行バージョンの河豚板 7.2を用いたアプライアンスの製作手順を紹介する。
**作業の流れ [#w6035d6a]
-LiveUSBの作成
-Liveモードで起動し、基本設定
-ファイルの自動保存→reboot→自動起動するように設定
-nshのインストールと関連設定
**作業の流れ
導作業の全体の流れは下図の通り:
初回起動 +-----------------------+ モード0で起動し、
[LiveUSBの作成]-->[起動(モード0)]-->|河豚板の設定: |--+ OpenBSDの設定
手動 | 終了時のファイル保存 | | 河豚板の設定
| 起動時の自動読込 | |
| etc... | |
+-----------------------+ |
|
+--------------------[reboot]---------------------+
|
| 2回目の起動 +-----------------------+ NSH関連の設定
+-->[起動(モード3)]-->|NSHのインストール・設定|--+ インストール
自動 +-----------------------+ | ユーザアカウント作成
| タイムゾーン
+--------------------[reboot]---------------------+
|
| 3回目以降の起動 +-----------------------+ NSHを運用しながら、
Power On----->+-->[起動(モード3)]-->|NSHの運用 |--+ 設定の修正・調整を実施
^ 自動 +-----------------------+ |
| |
Power Off<----+--------------------[halt or reboot]-------------+
**nshについて [#gd288132]
**NSHについて
プロジェクトホームページ: https://www.nmedia.net/nsh/ より
>'''NSH は、OpenBSD ベースのネットワークアプライアンスを対象とした CLI です。これは ifconfig, sysctl および route を独自のシンプルなコマンド言語と置き換えるもので 他のデーモンのコンフィギュレーションをひとつの場所にカプセル化し、効果的に アプライアンススタイルで使用するために /etc/netstart と /etc/rc の一部を置き換えています。'''~
'''nshによってカプセル化されたデーモンとサービス: pf, ospfd, ospf6d, bgpd, ripd, ldpd, relayd, ipsecctl, iked, rad.Dvmrpd, sdpf6d, bgpd, ripd, ldpd, relayd, ipsecctl, iked, rad, dvmrpd, sasyncd, dhcpd, snmpd, sshd, ntpd, ifstated, tftp-proxy, ftp-proxy, tftpd, npppd, tftpd, npppd, tftp-proxy, ftp-proxy, tftpd、npppd、resolv.conf、inetd、smtpd、ldapd、ifstated'''
-GitHubリポジトリ: https://github.com/yellowman/nsh
-紹介動画(EuroBSDcon 2022): https://www.youtube.com/watch?v=WMKxIHaWaG0
-紹介動画: [[nsh: Network Shell on top of OpenBSD made for network administrators>https://www.youtube.com/watch?v=WMKxIHaWaG0]] (EuroBSDcon 2022)
作のChris Cappuccioはまた、[[flashrd>https://www.nmedia.net/flashrd/]]の作者でもある。
期間限定で以下のリンクを作成した
-オンラインマニュアル: https://home.fuguita.org/nsh.8.html ~
([[自動翻訳版>https://home-fuguita-org.translate.goog/nsh.8.html?_x_tr_sl=en&_x_tr_tl=ja&_x_tr_hl=ja&_x_tr_pto=wapp]])
作のChris Cappuccio氏はまた、フラッシュデバイスで動作するOpenBSDイメージを作成する[[flashrd>https://www.nmedia.net/flashrd/]]の作者でもある。
----
#contents
*LiveUSB版河豚板を作成 [#n97624f3]
**ダウンロード [#wa1f8fa3]
*LiveUSB版河豚板を作成
**ダウンロード
[[ダウンロードミラー一覧>FuguIta/Download]]からよさげな場所を選んでダウンロード
# ftp https://jp2.dl.fuguita.org/SHA256
Trying 160.16.199.59...
Requesting https://jp2.dl.fuguita.org/SHA256
100% |*******************************************************| 640 00:00
640 bytes received in 0.00 seconds (2.65 MB/s)
# ftp https://jp2.dl.fuguita.org/FuguIta-7.2-amd64-202211151.img.gz
Trying 160.16.199.59...
Requesting https://jp2.dl.fuguita.org/FuguIta-7.2-amd64-202211151.img.gz
100% |*******************************************************| 332 MB 00:32
348583114 bytes received in 32.14 seconds (10.34 MB/s)
**ファイルの整合性チェック [#g03c034c]
MD5かSHA256のいずれかを用いてダウンロードしたファイルが壊れていないかチェックする。以下はSHA256の例
**ファイルの整合性チェック
MD5かSHA256のいずれかを用いてダウンロードしたファイルが壊れていないかチェックする。以下はSHA256の例:
# sha256 -C SHA256 FuguIta-7.2-amd64-202211151.img.gz
(SHA256) FuguIta-7.2-amd64-202211151.img.gz: OK
**デバイスに書込み [#w0dbe3e1]
/dev/rsdXcには適宜デバイス名を当して実行
**デバイスに書込み
# zcat FuguIta-7.2-amd64-nsh_test.img.gz | dd of=/dev/rsdXc bs=1m
/dev/rsdXcには適宜デバイス名を当して実行。
*初回起ち上げ [#i7f54524]
**システムデバイスの指定 [#y868bd2e]
単一の河豚板デバイスのみ着していれば、デフォルト(ENTERのみ押下)でOK
*初回起ち上げ
**システムデバイスの指定
scanning partitions: sd0a sd0d sd0i
FuguIta's operating device(s): sd0a.
Which is FuguIta's operating device? [default: sd0a] ->
河豚板デバイスを一つだけ着しているので、デフォルト(ENTERのみ押下)でOK。
**MFSサイズの指定 [#u9ef51ad]
デフォルトでは、実メモリの75%をMFSに割り当てる。
**MFSサイズの指定
available memory: 2031M
Enter mfs size.
You can add suffix K, M, or G.
% is a percentage of memory size.
and %% is a percentage of the total memory and swap.
otherwise considered "megabytes"
[default: 1523M] ->
set mfs size to 1523MB
**起動モードの指定 [#b4a16750]
起動モード0で起動。~
モード1での起動も可。この場合、運用中は完オン・メモリで動作する。
デフォルトでは、実メモリの75%をMFSに割り当てる。~
(実測したところ、物理メモリは192MB程度以上実されていれば使用可能となった)
**起動モードの指定
LiveUSBの標準的なモードである起動モード0で起動。
Boot modes:
0: fresh boot - standard mode as a live system
1: fresh boot - less memory, faster boot
(/usr is non-writable, can't pkg_add)
2: fresh boot - works using only RAM
(about 1GB or more of RAM required)
3: boot with retrieving saved files from storage device
or enter passphrase for an encrypted volume
4: boot with retrieving saved files from floppy disk
5: interactive shell for maintenance
-> 0
Running manual setup.
モード2での起動も可。この場合、運用中は完オン・メモリで動作する。
**rootパスワード [#ibee2606]
この後、OSが動作するための基本的な設定について訊かれてゆくので、適宜力してゆく。
**rootパスワード
Changing password for root.
New password:
Retype new password:
passwd: password updated successfully
簡単すぎるパスワードは弾かれるので注意。
**ネットワーク関連の設定 [#lf7dacc4]
**ネットワーク関連の設定
ここでの設定は、河豚板をネットワーククライアントとして使用することを想定している。
今回、ルータなどとしての使用を想定しているので、複数のI/Fとその間のフォワーディングなどに関する設定を追加する要がある。~
それらの設定は、起動後にrootでログインして行うか、あるいはnshで行う。
今回、ルータなどとしての使用を想定しているので、複数のネットワークインターフェースとその間のフォワーディングなどに関する設定を追加する要がある。~
それらの設定は、起動後にrootでログインして行うか、あるいはNSHで行う。
***ホスト名 [#e1fa4ae0]
***ホスト名
Hostname with domain part (FQDN):
only host name without domain part is also OK.
-> nshrouter.local
***IPバージョン [#z0417cd1]
***IPバージョン
今回はIPv4のみでの運用を想定
IP protocol version(s) to be enabled: 4, 6, 46, 64 or "none"
4: enable only IPv4
6: enable only IPv6
46: give priority to IPv4 name resolution
64: give priority to IPv6 name resolution
none: operate as standalone
[64] ->4
今回はIPv4のみでの運用を想定
***ネットワークインターフェース [#s3ddee1c]
***ネットワークインターフェース
Network Interfaces: Choose one
NIC type Name
-------- ----- ------------
vio0 ether unknown
[vio0] ->
***IPアドレス、デフォルトルート [#e464cca4]
***IPアドレス、デフォルトルート
IPv4 - address and routing:
Enter "auto" or "IPv4_address[/mask] [default_gateway]"
"auto" is an automatic setting by DHCP.
The "/mask" part can be specified in either format,
such as "/255.255.255.0" or "/24".
If there is no default gateway,
set the second field to "none" or leave it blank.
[auto] -> 100.64.1.3/31 100.64.1.2
***ネームサーバ [#r48f19fb]
***ネームサーバ
DNS servers: up to 3 IP addresses, separated by spaces
-> 9.9.9.9
**ログイン方法 [#m74b7f13]
**ログイン方法
Do you login with C)onsole or X) Window System?
[default: C] ->
この後、OpenBSD本来のブートシーケンスが続き、最後にログインプロンプトが表示される。
*ルートでログインして諸設定 [#if05b470]
**タイムゾーン [#qe6320c8]
*ルートでログインして諸設定
起動が完了し、ログインプロンプトが表示されたら、ほど設定したパスワードを用いてrootでログインし、以降の作業を行う。
**タイムゾーン
nshrouter# date
Tue Nov 22 05:28:53 UTC 2022
nshrouter# ln -sf usr/share/zoneinfo/Asia/Tokyo /etc/localtime
nshrouter# date
Tue Nov 22 14:29:02 JST 2022
**シャットダウン時のファイル自動保存 [#w32703d4]
**シャットダウン時のファイル自動保存
河豚板では、MFS上のデータをUSBメモリ等に保存するにはusbfadmというユティリティを使うが、/etc/rc.shutdownを以下のように編集することでシャットダウン時にusbfadmを実行し、自動的に保存を行うようになる。
nshrouter# vi /etc/rc.shutdown
force_umount=No # set Yes for forced umount /ram at shutdown
force_resync=Yes # set Yes to re-sync at shutdown <== これをYesに変更
# stop_all_daemons - to eliminate all daemons at umount /ram
#
stop_all_daemons () {
:
:
**起動時の設定の自動化 [#c09ecea1]
USBメモリのnoasksというファイルを編集することにより、起動時に手動で入力していた設定が自動化される。
**起動時の設定の自動化
USBメモリのnoasksというファイルを編集することにより、起動時に手動で入力していた設定が自動化される。~
前回の終了時に保存したファイルの読み込みも、このnoasksで指定する。
nshrouter# mount /dev/sd0d /mnt
nshrouter# vi /mnt/livecd-config/7.2/amd64/noasks
#
# noasks - parameter settings for non-interactive boot
#
# Make statements uncommented
# Then assign real values
#
#
# FuguIta system device
# - Use one of two lines
#noask_rdev=sd0a # device name format
noask_rdev=3b5447abd772121d.a # DUID format <==アンコメントする
noask_rdev=3b5447abd772121d.a # DUID format <==河豚板のシステムデバイス
# 常に同じデバイスを指定できる
# mfs size in MB ので、DUIDでの指定推奨
noask_umem=75% <==アンコメント
# mfs size in MB ので、DUID (Disklabel Unique ID)
noask_umem=75% <==MFSのサイズ による指定を推奨
#
# boot mode
noask_setup_rw_mode=3 <==アンコメント
noask_setup_rw_mode=3 <==起動モード 3=保存されたファイルを読み込んで起動
#
# storage device
# - Use one of two lines
#noask_confdev=sd0d # device name format
noask_confdev=3b5447abd772121d.d # DUID format <==アンコメント
noask_confdev=3b5447abd772121d.d # DUID format <==ファイルを読み込むデバイス
# noask_rdevと同じくDUID推奨
# data set name in USB flash drive
noask_confdir=nshrouter <==アンコメント
noask_confdir=nshrouter <==読み込むファイルの保存名
nshrouter# umount /mnt
*リブートの動作確認 [#wa516f7a]
**ここまでの設定をとりあえず保存 [#j7424422]
usbfadmを起動し、保存、保存名を指定して保存実行
*リブートの動作確認
**ここまでの設定をとりあえず保存
usbfadmを起動し、保存、保存名を指定して保存を実行
nshrouter# usbfadm
Welcome to usbfadm.
USB flash drive administration tool for FuguIta
Version/Arch: 7.2/amd64 (FuguIta-7.2-amd64-202211151)
Boot mode: manual
Target device: not set
Data saved as: not set
readline capability available
TAB to complete the reserved words
Type ? for help.
? : ? ->target
Searching storage device
Please make sure the device inserted.
Then press ENTER ->
sd0a +sd0d
target device->sd0d
sd0d : ? ->saveas
Name of saved data->nshrouter
Your data will be saved as ``nshrouter''.
sd0d : nshrouter ->sync
Sync current mfs as ``nshrouter'' , OK? [y/N] -> y
34.4MiB 0:00:04 [8.57MiB/s] [=================================]105% ETA 0:00:00
waiting for pax to finish ... syncing ... done.
sd0d : nshrouter ->quit
Bye bye...
nshrouter#
**リブート [#pca19e77]
**リブート
nshrouter# reboot
チェック項目
-シャットダウン時にファイルが自動保存されるか?
-再起動時に自動で立ち上がるか?
-再起動完了後、保存時の環境が復帰されているか?
nshrouter# reboot
*nsh関連の設定 [#h311791c]
**nshのインストール [#x4962962]
*NSH関連の設定
**NSHのインストール
packagesからインストールする
nshrouter# pkg_add nsh
quirks-6.42(signed) 2022-11-20T19:34:54Z
quirks-6.42:ok
Ambiguous:
a 0: <None>
1: nsh-1.0.20220919
2: nsh-1.0.20220919-static
Your choice: 1
nsh-1.0.20220919:ok
nshrouter# nsh
% NSH v1.0
nshrouter.local/quit
% Session terminated.
nshrouter#
nsh-1.0.20220919-staticは、NSHの静的リンク版(chrootして実行したい時などに使用?)。
**nshの実行アカウントを作成 [#h58613ed]
adduser.confの作成について色訊かれるが、全部デフォルト(ENTER押下)でよい。
注: 時計がずれているとTLS通信が失敗し、pkg_addが不成功に終わる場合がある。その場合は、dateコマンドを用い、手動で時刻合わせをするか、あるいは、
nshrouter# rdate ntp.nict.jp
などとして時刻を合わせる。
**NSHの実行アカウントを作成
adduserコマンドは初回実行時、adduser.confの作成について色訊かれるが、全部デフォルト(ENTER押下)でよい。
nshrouter# adduser nsh
Couldn't find /etc/adduser.conf: creating a new adduser configuration file
Reading /etc/shells
Enter your default shell: csh ksh nologin nsh sh [ksh]:
Your default shell is: ksh -> /bin/ksh
Default login class: authpf bgpd daemon default pbuild staff unbound vmd xenodm
[default]:
Enter your default HOME partition: [/home]:
Copy dotfiles from: /etc/skel no [/etc/skel]:
Send welcome message?: /path/file default no [no]:
Do not send message(s)
Prompt for passwords by default (y/n) [y]:
Default encryption method for passwords: auto blowfish [auto]:
Use option ``-silent'' if you don't want to see all warnings and questions.
Reading /etc/shells
Check /etc/master.passwd
Check /etc/group
Ok, let's go.
Don't worry about mistakes. There will be a chance later to correct any input.
Enter username []: nsh
Enter full name []: Network SHell
Enter shell csh ksh nologin nsh sh [ksh]:
Uid [1000]:
Login group nsh [nsh]:
Login group is ``nsh''. Invite nsh into other groups: guest no
[no]: wheel
Login class authpf bgpd daemon default pbuild staff unbound vmd xenodm
[default]:
Enter password []:
Enter password again []:
Name: nsh
Password: ****
Fullname: Network SHell
Uid: 1000
Gid: 1000 (nsh)
Groups: nsh wheel
Login Class: default
HOME: /home/nsh
Shell: /bin/ksh
OK? (y/n) [y]: y
Added user ``nsh''
Copy files from /etc/skel to /home/nsh
Add another user? (y/n) [y]: n
Goodbye!
nshrouter# exit
OpenBSD/amd64 (nshrouter.local) (tty00)
login: nsh
Password:
nshはroot権限でコマンドを実行するので、nshアカウントはwheelグループに所属させておく。
NSHはroot権限でコマンドを実行するので、nshアカウントはwheelグループに所属させておく。
***~nsh/.profileの編集 [#p7452927]
ログイン直後にroot権限でnshが実行されるようにする。
***/home/nsh/.profileの編集
ログイン直後にroot権限でNSHが実行されるようにする。
nshrouter$ vi ~/.profile
exec doas /usr/local/bin/nsh
exit # for fail safe
pkg_addでnshをインストールすると、/etc/shellsにnshが登録されるので、これをログインシェルとしてもいいような気もするが、マニュアルページではこの方法は推奨されていない。~
pkg_addでNSHをインストールすると、/etc/shellsにnshが登録されるので、これをログインシェルとしてもいいような気もするが、マニュアルページではこの方法は推奨されていない。~
>nsh(8) Section 7 > Adding system users to:~
'''Do NOT add nwrapper (or nsh) to /etc/shells. They should not be entered here.'''
***/etc/doas.confの編集 [#rc995110]
***/etc/doas.confの編集
ユーザnshがパスワード無しでroot権限のnshを実行できるように設定
nshrouter# echo permit nopass nsh cmd /usr/local/bin/nsh > /etc/doas.conf
***設定の保存
以上で、ユーザアカウントnshでログインするとnshが起動するようになった。
念の為、ここまでの状態をUSBメモリに保存しておく
nshrouter# usbfadm -r
========================================
= Sync /dev/sd0d with current mfs as nshrouter
=
sending incremental file list
etc/fstab
154 100% 0.00kB/s 0:00:00 (xfr#1, ir-chk=1078/1094)
:
:
var/spool/smtpd/purge/2135993693/
var/spool/smtpd/temporary/
nshrouter#
一度、保存を行っている場合はコマンドラインから usbfadm -r で保存を再実行できる。
*トラブルシューティング [#j2f3f283]
**OpenNTPDの設定で警告が出る [#s348a0e8]
データ保存の初回実行時はpaxを使用し、次回からはrsyncによる差分転送を行う。
*トラブルシューティング
**OpenNTPDの設定で警告が出る
% NSH v1.0
nshrouter.local/enable
nshrouter.local(p)/ntp edit
servers ntp.nict.jp
configuration OK
nshrouter.local(p)/ntp disable
-s option no longer works and will be removed soon. <== ntpd -sはobsoleteなので
-s option no longer works and will be removed soon. <== ntpdの -s オプションは古いので
Please reconfigure to use constraints or trusted servers. ntpdがこの警告を出す。
nshrouter.local(p)/ntp enable
-s option no longer works and will be removed soon.
Please reconfigure to use constraints or trusted servers.
nshrouter.local(p)/!ntpctl -s all
0/5 peers valid, clock unsynced
nshrouter.local(p)/!ntpctl -s all <== ntpdの同期状は、ntpctlコマンドを子プロセスとして
0/5 peers valid, clock unsynced 呼出し、確認する。
peer
wt tl st next poll offset delay jitter
133.243.238.163 from pool ntp.nict.jp
1 3 1 2s 5s ---- peer not valid ----
133.243.238.164 from pool ntp.nict.jp
1 3 1 4s 7s ---- peer not valid ----
61.205.120.130 from pool ntp.nict.jp
1 3 1 2s 5s ---- peer not valid ----
133.243.238.243 from pool ntp.nict.jp
1 3 1 2s 5s ---- peer not valid ----
133.243.238.244 from pool ntp.nict.jp
1 3 1 3s 6s ---- peer not valid ----
nshrouter.local(p)/
設定変更自体は反映されている。
NTPの参サーバがntp.pool.orgからntp.nict.jpに変っているので、設定変更自体は反映されている。
**nshからreboot/haltでファイルが自動保存されない [#yb6d3791]
**nshからreboot/haltでファイルが自動保存されない
nshrouter.local(p)/reboot <= nshの特権モードでrebootを実行
% Reboot initiated
syncing disks... done <= ファイルが自動保存されず、いきなりreboot
vmmci0: powerdown /etc/rc.shutdownが実行されない
rebooting...
Using drive 0, partition 3.
Loading......
probing: pc0 com0 mem[638K 2046M a20=on]
disk: hd0+
>> OpenBSD/amd64 BOOT 3.55/*
nshのソースで該当部分を見てみる~
これに関しては、マニュアルページにも以下のような記述がある。
>reboot~
Restart the system. Warning no confirmation prompt is issued, configuration changes are NOT automatically saved! User must save configuration manually BEFORE using reboot. Requires privileged access.
NSHのソースで該当部分を見てみる~
''commands.c''
/*
* Reboot
*/
int
nreboot(void)
{
printf ("%% Reboot initiated\n");
if (reboot (RB_AUTOBOOT) == -1) <== reboot(2)が呼び出されている
printf("%% reboot: RB_AUTOBOOT: %s\n", strerror(errno));
return(0);
}
int
halt(void)
{
printf ("%% Shutdown initiated\n");
if (reboot (RB_HALT) == -1) <== reboot(2)が呼び出されている
printf("%% reboot: RB_HALT: %s\n", strerror(errno));
return(0);
}
/etc/rc.shutdownが呼び出されないのは、nshがreboot(2)を直接呼出してOSの停止処理を行っているため。
**改修 [#s8960891]
NSHからwrite-configでファイルに書き出した設定は河豚板ではMFS上に載っているので、いきなりリブートすると、この設定が保存されず都合が悪い。~
シャットダウン時に/etc/rc.shutdownが実行されるようにする要がある。
**改修
ports treeを展開し、/usr/ports/shells/nsh 内にパッチファイルを追加
''/usr/ports/shell/nsh/patches/patch-ctl_c''
--- ctl.c.orig Tue Sep 20 04:18:55 2022
+++ ctl.c Tue Nov 22 09:37:12 2022
@@ -412,7 +412,7 @@
char *ctl_ntp_test[] = { NTPD, "-nf", REQTEMP, NULL };
struct ctl ctl_ntp[] = {
{ "enable", "enable service",
- { NTPD, "-sf", REQTEMP, NULL }, NULL, DB_X_ENABLE, T_EXEC },
+ { NTPD, "-f", REQTEMP, NULL }, NULL, DB_X_ENABLE, T_EXEC },
{ "disable", "disable service",
{ PKILL, table, "ntpd", NULL }, NULL, DB_X_DISABLE, T_EXEC },
{ "edit", "edit configuration",
''/usr/ports/shell/nsh/patches/patch-commands_c''
--- commands.c.orig Tue Sep 20 04:18:55 2022
+++ commands.c Tue Nov 22 09:37:12 2022
@@ -1962,7 +1962,7 @@
nreboot(void)
{
printf ("%% Reboot initiated\n");
- if (reboot (RB_AUTOBOOT) == -1)
+ if (system("/sbin/reboot") == -1)
printf("%% reboot: RB_AUTOBOOT: %s\n", strerror(errno));
return(0);
}
@@ -1971,7 +1971,7 @@
halt(void)
{
printf ("%% Shutdown initiated\n");
- if (reboot (RB_HALT) == -1)
+ if (system("/sbin/halt -p") == -1)
printf("%% reboot: RB_HALT: %s\n", strerror(errno));
return(0);
}
portsにてパッチを適用し、ビルド
nshrouter# pkg_delete nsh
nsh-1.0.20220919:ok
Read shared items:ok
nshrouter# cd /usr/ports/shells/nsh
nshrouter# make install
===> Checking files for nsh-1.0.20220919
>> Fetch https://github.com/yellowman/nsh/archive/fcad0f6af197ab0c96e2c5410c....
>> (SHA256) nsh-1.0.20220919-fcad0f6a.tar.gz: OK
===> nsh-1.0.20220919 depends on: sqlite3-* -> sqlite3-3.39.3
===> Verifying specs: c curses edit sqlite3
===> found c.96.2 curses.14.0 edit.5.2 sqlite3.37.20
===> Extracting for nsh-1.0.20220919
===> Patching for nsh-1.0.20220919
===> Patching for nsh-1.0.20220919 <== 今ほど追加したパッチが適用されている
===> Applying OpenBSD patch patch-commands_c
Hmm... Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|--- commands.c.orig Tue Sep 20 04:18:55 2022
|+++ commands.c Tue Nov 22 09:37:12 2022
--------------------------
Patching file commands.c using Plan A...
Hunk #1 succeeded at 1962.
Hunk #2 succeeded at 1971.
done
===> Applying OpenBSD patch patch-ctl_c
Hmm... Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|--- ctl.c.orig Tue Sep 20 04:18:55 2022
|+++ ctl.c Tue Nov 22 09:37:12 2022
--------------------------
Patching file ctl.c using Plan A...
Hunk #1 succeeded at 412.
done
===> Compiler link: clang -> /usr/bin/clang
===> Compiler link: clang++ -> /usr/bin/clang++
===> Compiler link: cc -> /usr/bin/cc
===> Compiler link: c++ -> /usr/bin/c++
===> Generating configure for nsh-1.0.20220919
===> Configuring for nsh-1.0.20220919
===> Building for nsh-1.0.20220919
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast ....
sh /ram/usr/ports/pobj/nsh-1.0.20220919/nsh-fcad0f6af197ab0c96e2c5410....c546ad90027f7a1/compile.sh
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c compile.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c main.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c genget.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c commands.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c stats.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c kroute.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c ctl.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c show.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c if.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c version.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c route.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c conf.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c complete.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c ieee80211.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c bridge.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c tunnel.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c media.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c sysctl.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c passwd.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c pfsync.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c carp.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c trunk.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c who.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c more.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c stringlist.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c utils.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c sqlite3.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c ppp.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c nopt.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c pflow.c
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast -I/usr/local/include -MD -MP -I/usr/local/include -c wg.c
cc -L/usr/local/lib -o nsh arp.o compile.o main.o genget.o commands.o stats.o kroute.o ctl.o show.o if.o version.o route.o conf.o complete.o ieee80211.o bridge.o tunnel.o media.o sysctl.o passwd.o pfsync.o carp.o trunk.o who.o more.o stringlist.o utils.o sqlite3.o ppp.o nopt.o pflow.o wg.o -ledit -ltermcap -lsqlite3 -L/usr/local/lib
sh /ram/usr/ports/pobj/nsh-1.0.20220919/nsh-fcad0f6af197ab0c96e2c5410....
:
:
cc -O2 -pipe -Wmissing-prototypes -Wformat -Wall -Wbad-function-cast ....
cc -L/usr/local/lib -o nsh arp.o compile.o main.o genget.o commands ....
===> Faking installation for nsh-1.0.20220919
/usr/ports/pobj/nsh-1.0.20220919/bin/install -c -s -m 755 /usr/ports/pobj/nsh-1.0.20220919/nsh-fcad0f6af197ab0c96e2c5410c546ad90027f7a1/nsh /usr/ports/pobj/nsh-1.0.20220919/fake-amd64/usr/local/bin
/usr/ports/pobj/nsh-1.0.20220919/bin/install -c -m 644 /usr/ports/pobj/nsh-1.0.20220919/nsh-fcad0f6af197ab0c96e2c5410c546ad90027f7a1/nsh.8 /usr/ports/pobj/nsh-1.0.20220919/fake-amd64/usr/local/man/man8/
/usr/ports/pobj/nsh-1.0.20220919/bin/install -c -m 755 /usr/ports/pobj/nsh-1.0.20220919/nsh-fcad0f6af197ab0c96e2c5410c546ad90027f7a1/save-ro.sh /usr/ports/pobj/nsh-1.0.20220919/fake-amd64/usr/local/bin
/usr/ports/pobj/nsh-1.0.20220919/bin/install -c -m 755 /usr/ports/pobj/nsh-1.0.20220919/nsh-fcad0f6af197ab0c96e2c5410c546ad90027f7a1/save-rw.sh /usr/ports/pobj/nsh-1.0.20220919/fake-amd64/usr/local/bin
/usr/ports/pobj/nsh-1.0.20220919/bin/install -d -m 755 /usr/ports/pobj/nsh-1.0.20220919/fake-amd64/usr/local/share/doc/nsh
sed -i s,/usr/local,/usr/local,g /usr/ports/pobj/nsh-1.0.20220919/nsh-fcad0f6af197ab0c96e2c5410c546ad90027f7a1/MANUAL
/usr/ports/pobj/nsh-1.0.20220919/bin/install -c -m 644 /usr/ports/pobj/nsh-1.0.20220919/nsh-fcad0f6af197ab0c96e2c5410c546ad90027f7a1/MANUAL /usr/ports/pobj/nsh-1.0.20220919/fake-amd64/usr/local/share/doc/nsh/
/usr/ports/pobj/nsh-1.0.20220919/bin/install -c -m 644 /usr/ports/pobj/nsh-1.0.20220919/nsh-fcad0f6af197ab0c96e2c5410c546ad90027f7a1/README /usr/ports/pobj/nsh-1.0.20220919/fake-amd64/usr/local/share/doc/nsh/
/usr/ports/pobj/nsh-1.0.20220919/bin/install -c -m 644 /usr/ports/pobj/nsh-1.0.20220919/nsh-fcad0f6af197ab0c96e2c5410c546ad90027f7a1/TODO /usr/ports/pobj/nsh-1.0.20220919/fake-amd64/usr/local/share/doc/nsh/
/usr/ports/pobj/nsh-1.0.20220919/bin/install -c -m 644 /usr/ports/pobj/nsh-1.0.20220919/nsh-fcad0f6af197ab0c96e2c5410c546ad90027f7a1/COPYRIGHT /usr/ports/pobj/nsh-1.0.20220919/fake-amd64/usr/local/share/doc/nsh/
/usr/ports/pobj/nsh-1.0.20220919/bin/install -c -s -m 755 /usr/ports ....
===> Building package for nsh-1.0.20220919
Create /usr/ports/packages/amd64/all/nsh-1.0.20220919.tgz
Creating package nsh-1.0.20220919
KLink*to*/usr/ports/packages/amd64/ftp/nsh-1.0.20220919.tgz%K%K1%KK|K72%K
:
:
Link to /usr/ports/packages/amd64/ftp/nsh-1.0.20220919.tgz
===> Verifying specs: c curses edit sqlite3
===> found c.96.2 curses.14.0 edit.5.2 sqlite3.37.20
===> Installing nsh-1.0.20220919 from /usr/ports/packages/amd64/all/
nsh-1.0.20220919:9okK************** | 72%K | 0%K
nsh-1.0.20220919:9ok
nshrouter# nsh
% NSH v1.0
nshrouter.local/enable
*雑感
NSHの利用についてはここまでで、ネットワーク機能の本格的な設定はこれから。
*まとめ [#eca6fa7b]
**nshの初期化について
''write-config''を実行すると/etc/nshrcに設定が保存される。マニュアルでは、
'''On the next startup of the system, this saved configuration is used.'''
という記述があるが、次の起動では保存された設定は反映されない。
nshの2つのコマンドラインオプション、
:-c '''config-script-file'''|''nsh'' execute the command(s) in the '''config-script-file'''. This is typically used to implement scripted changes to configuration.
:-i '''rcfile'''|load the inital system configuration from the command(s) in the '''rcfile'''. This is typically used to clear the configuration load a full ''nsh'' configuration script from '''rcfile''' .
を指定しても、ファイルのnshコマンドを実行した後、終了する。~
''/etc/nshrc''は以下のように記述した方がよいかもしれない。
if [ -r /etc/nshrc ]; then
doas /usr/local/bin/nsh -i /etc/nshrc
fi
exec doas /usr/local/bin/nsh
exit # fail safe
**この構築手順を用いた他の事例
設定手順の[[ダウンロード>#wa1f8fa3]]から[[起動時の設定の自動化>#c09ecea1]]までは、河豚板でなにがしかのシステムを構築する場合の定石。~
以下の事例でもこの手順に従ってシステムを構築している。
-Qiita: [[OpenBSDライブシステム「河豚板」の日本語デスクトップ環境を構築する>https://qiita.com/ykaw/items/ca008a34d73d5f1f6dd8]]
-[[How to port PFFW to FuguIta>FuguIta/BBS#r9e5ee9b]]
-[[Desktop environment demo of FuguIta>FuguIta/BBS#r9e5ee9b]]
-[[isotop on FuguIta>FuguIta/BBS/10#vc6211a3]]
-[[温度測定システム>https://twitter.com/yoshi_kaw/status/1534358055101485056]]
*関連報
-[[河豚板ガイド]]
-[[FuguIta Start Guide>FuguIta/StartGuide]]
-YouTube: [[Basic settings for FuguIta (OpenBSD-based Live System)>https://www.youtube.com/watch?v=zyz2Ukcx68Q]]
----
#topicpath