FuguIta/Report/38
をテンプレートにして作成
Start:
* 7.9-arm64 on Raspberry Pi Zero 2 W Rev 1.0 [#u2de2586]
-Posted by Mitsuki Shirase at 2026-05-28 (Thu) 00:58:15
-Release: 7.9-arm64-202605271
-Media: SD/microSD
-Hardware: Raspberry Pi Zero 2 W Rev 1.0 (CPU: ARM Cortex...
** Remarks [#d59a9a02]
#setlinebreak(on)
#FuguIta
Equipped with the PoE Ethernet / USB HUB HAT for Raspberr...
Wi-Fi is not recognized.
` bwfm0: failed loadfimware of file brcmfmac43430-sdio.ra...
dmesg
OpenBSD 7.9 (RDROOT.MP) #4: Wed May 27 05:03:24 JST 2026
kaw@nimbus72.localnet:/opt/fi/7.9/sys/arch/arm64/co...
real mem = 468172800 (446MB)
avail mem = 408776704 (389MB)
random: good seed from bootblocks
mainbus0 at root: Raspberry Pi Zero 2 W Rev 1.0
efi0 at mainbus0: UEFI 2.11
efi0: Das U-Boot rev 0x20250700
smbios0 at efi0: SMBIOS 3.7.0
smbios0: vendor U-Boot version "2025.07" date 07/01/2025
smbios0: raspberrypi Raspberry Pi Zero 2 W Rev 1.0
cpu0 at mainbus0 mpidr 0: ARM Cortex-A53 r0p4
cpu0: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/lin...
cpu0: 512KB 64b/line 16-way L2 cache
cpu0: CRC32,ASID16
cpu1 at mainbus0 mpidr 1: ARM Cortex-A53 r0p4
cpu1: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/lin...
cpu1: 512KB 64b/line 16-way L2 cache
cpu2 at mainbus0 mpidr 2: ARM Cortex-A53 r0p4
cpu2: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/lin...
cpu2: 512KB 64b/line 16-way L2 cache
cpu3 at mainbus0 mpidr 3: ARM Cortex-A53 r0p4
cpu3: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/lin...
cpu3: 512KB 64b/line 16-way L2 cache
"linux,cma" at mainbus0 not configured
apm0 at mainbus0
simplefb0 at mainbus0: 1824x984, 32bpp
wsdisplay0 at simplefb0 mux 1: console (std, vt100 emul...
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"system" at mainbus0 not configured
"axi" at mainbus0 not configured
simplebus0 at mainbus0: "soc"
bcmclock0 at simplebus0
bcmmbox0 at simplebus0
bcmgpio0 at simplebus0
bcmaux0 at simplebus0
bcmdmac0 at simplebus0: DMA0 DMA2 DMA4 DMA5 DMA8 DMA9 D...
bcmintc0 at simplebus0
pluart0 at simplebus0: rev 2, 16 byte fifo
bcmsdhost0 at simplebus0: 250 MHz base clock
sdmmc0 at bcmsdhost0: 4-bit, sd high-speed, mmc high-sp...
dwctwo0 at simplebus0
bcmdog0 at simplebus0
bcmrng0 at simplebus0
bcmtemp0 at simplebus0
"interrupt-controller" at simplebus0 not configured
sdhc0 at simplebus0
sdhc0: SDHC 3.00, 200 MHz base clock
sdmmc1 at sdhc0: 4-bit, sd high-speed, mmc high-speed
"firmware" at simplebus0 not configured
"power" at simplebus0 not configured
"mailbox" at simplebus0 not configured
"gpiomem" at simplebus0 not configured
"fb" at simplebus0 not configured
simplebus1 at simplebus0: "nvmem"
"nvmem_otp" at simplebus1 not configured
"nvmem_cust" at simplebus1 not configured
simplebus2 at mainbus0: "clocks"
"clk-osc" at simplebus2 not configured
"clk-usb" at simplebus2 not configured
"phy" at mainbus0 not configured
"arm-pmu" at mainbus0 not configured
agtimer0 at mainbus0: 19200 kHz
"cam1_regulator" at mainbus0 not configured
"cam_dummy_reg" at mainbus0 not configured
"fixedregulator_3v3" at mainbus0 not configured
"fixedregulator_5v0" at mainbus0 not configured
gpioleds0 at mainbus0: "ACT"
usb0 at dwctwo0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Broadcom DWC...
scsibus0 at sdmmc0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <Sandisk, SA128, 0072> re...
sd0: 119152MB, 512 bytes/sector, 244023296 sectors
uhub1 at uhub0 port 1 configuration 1 interface 0 "Term...
bwfm0 at sdmmc1 function 1
manufacturer 0x02d0, product 0xa9a6 at sdmmc1 function ...
uhub2 at uhub1 port 2 configuration 1 interface 0 "Term...
uhidev0 at uhub2 port 1 configuration 1 interface 0 "WW...
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub2 port 1 configuration 1 interface 1 "WW...
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
ucc0 at uhidev1 reportid 2: 4 usages, 4 keys, array
wskbd1 at ucc0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub2 port 1 configuration 1 interface 2 "WW...
uhidev2: iclass 3/1
ums0 at uhidev2: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev3 at uhub2 port 1 configuration 1 interface 3 "WW...
uhidev3: iclass 3/1, 2 report ids
ums1 at uhidev3 reportid 2: 5 buttons, Z dir
wsmouse1 at ums1 mux 0
ure0 at uhub1 port 4 configuration 1 interface 0 "Realt...
ure0: RTL8152 (0x4c10), address 00:e0:4c:36:12:38
rlphy0 at ure0 phy 0: RTL8201E, rev. 2
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
WARNING: CHECK AND RESET THE DATE!
gpio0 at bcmgpio0: 54 pins
bwfm0: failed loadfirmware of file brcmfmac43430-sdio.r...
- Is that firmware enabled on vanila OpenBSD rather than ...
- I have not been able to confirm it yet, so I apologize ...
- I found brcmfmac43436-sdio.raspberrypi,model-zero-2-w.b...
#aname(update_firmware)
- The procedure to update firmware:
1. on other machine, download the firmware, then save it ...
other_host # ftp http://firmware.openbsd.org/firmware/7....
Trying 2a04:4e42::820...
Requesting http://firmware.openbsd.org/firmware/7.9/bwfm...
100% |**************************************************...
12011326 bytes received in 2.87 seconds (3.98 MB/s)
other_host # mount /dev/sd0d /mnt
other_host # cp bwfm-firmware-20200316.1.3p5.tgz /mnt
other_host # umount /mnt
2. boot FuguIta device, then mount and update the firmware
rpizero2w # mount /dev/sd0d /mnt
rpizero2w # fw_update /mnt/bwfm-firmware-20200316.1.3p5....
fw_update: add bwfm; update none
rpizero2w # rm /bwfm-firmware-20200316.1.3p5.tgz
rpizero2w # umount /mnt
3. [[save the environment>fge2:usbfadm_sync]], then [[reb...
4. [[create Wi-Fi config, then enable it>fge3:netconf]]
~-- [[kaw]] &new{2026-05-28 (Thu) 14:31:25};
- Thank you for taking the time to verify this. I was ab...
#comment
#setlinebreak(off)
#navi(FuguIta/Report)
End:
* 7.9-arm64 on Raspberry Pi Zero 2 W Rev 1.0 [#u2de2586]
-Posted by Mitsuki Shirase at 2026-05-28 (Thu) 00:58:15
-Release: 7.9-arm64-202605271
-Media: SD/microSD
-Hardware: Raspberry Pi Zero 2 W Rev 1.0 (CPU: ARM Cortex...
** Remarks [#d59a9a02]
#setlinebreak(on)
#FuguIta
Equipped with the PoE Ethernet / USB HUB HAT for Raspberr...
Wi-Fi is not recognized.
` bwfm0: failed loadfimware of file brcmfmac43430-sdio.ra...
dmesg
OpenBSD 7.9 (RDROOT.MP) #4: Wed May 27 05:03:24 JST 2026
kaw@nimbus72.localnet:/opt/fi/7.9/sys/arch/arm64/co...
real mem = 468172800 (446MB)
avail mem = 408776704 (389MB)
random: good seed from bootblocks
mainbus0 at root: Raspberry Pi Zero 2 W Rev 1.0
efi0 at mainbus0: UEFI 2.11
efi0: Das U-Boot rev 0x20250700
smbios0 at efi0: SMBIOS 3.7.0
smbios0: vendor U-Boot version "2025.07" date 07/01/2025
smbios0: raspberrypi Raspberry Pi Zero 2 W Rev 1.0
cpu0 at mainbus0 mpidr 0: ARM Cortex-A53 r0p4
cpu0: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/lin...
cpu0: 512KB 64b/line 16-way L2 cache
cpu0: CRC32,ASID16
cpu1 at mainbus0 mpidr 1: ARM Cortex-A53 r0p4
cpu1: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/lin...
cpu1: 512KB 64b/line 16-way L2 cache
cpu2 at mainbus0 mpidr 2: ARM Cortex-A53 r0p4
cpu2: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/lin...
cpu2: 512KB 64b/line 16-way L2 cache
cpu3 at mainbus0 mpidr 3: ARM Cortex-A53 r0p4
cpu3: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/lin...
cpu3: 512KB 64b/line 16-way L2 cache
"linux,cma" at mainbus0 not configured
apm0 at mainbus0
simplefb0 at mainbus0: 1824x984, 32bpp
wsdisplay0 at simplefb0 mux 1: console (std, vt100 emul...
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"system" at mainbus0 not configured
"axi" at mainbus0 not configured
simplebus0 at mainbus0: "soc"
bcmclock0 at simplebus0
bcmmbox0 at simplebus0
bcmgpio0 at simplebus0
bcmaux0 at simplebus0
bcmdmac0 at simplebus0: DMA0 DMA2 DMA4 DMA5 DMA8 DMA9 D...
bcmintc0 at simplebus0
pluart0 at simplebus0: rev 2, 16 byte fifo
bcmsdhost0 at simplebus0: 250 MHz base clock
sdmmc0 at bcmsdhost0: 4-bit, sd high-speed, mmc high-sp...
dwctwo0 at simplebus0
bcmdog0 at simplebus0
bcmrng0 at simplebus0
bcmtemp0 at simplebus0
"interrupt-controller" at simplebus0 not configured
sdhc0 at simplebus0
sdhc0: SDHC 3.00, 200 MHz base clock
sdmmc1 at sdhc0: 4-bit, sd high-speed, mmc high-speed
"firmware" at simplebus0 not configured
"power" at simplebus0 not configured
"mailbox" at simplebus0 not configured
"gpiomem" at simplebus0 not configured
"fb" at simplebus0 not configured
simplebus1 at simplebus0: "nvmem"
"nvmem_otp" at simplebus1 not configured
"nvmem_cust" at simplebus1 not configured
simplebus2 at mainbus0: "clocks"
"clk-osc" at simplebus2 not configured
"clk-usb" at simplebus2 not configured
"phy" at mainbus0 not configured
"arm-pmu" at mainbus0 not configured
agtimer0 at mainbus0: 19200 kHz
"cam1_regulator" at mainbus0 not configured
"cam_dummy_reg" at mainbus0 not configured
"fixedregulator_3v3" at mainbus0 not configured
"fixedregulator_5v0" at mainbus0 not configured
gpioleds0 at mainbus0: "ACT"
usb0 at dwctwo0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Broadcom DWC...
scsibus0 at sdmmc0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <Sandisk, SA128, 0072> re...
sd0: 119152MB, 512 bytes/sector, 244023296 sectors
uhub1 at uhub0 port 1 configuration 1 interface 0 "Term...
bwfm0 at sdmmc1 function 1
manufacturer 0x02d0, product 0xa9a6 at sdmmc1 function ...
uhub2 at uhub1 port 2 configuration 1 interface 0 "Term...
uhidev0 at uhub2 port 1 configuration 1 interface 0 "WW...
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub2 port 1 configuration 1 interface 1 "WW...
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
ucc0 at uhidev1 reportid 2: 4 usages, 4 keys, array
wskbd1 at ucc0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub2 port 1 configuration 1 interface 2 "WW...
uhidev2: iclass 3/1
ums0 at uhidev2: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev3 at uhub2 port 1 configuration 1 interface 3 "WW...
uhidev3: iclass 3/1, 2 report ids
ums1 at uhidev3 reportid 2: 5 buttons, Z dir
wsmouse1 at ums1 mux 0
ure0 at uhub1 port 4 configuration 1 interface 0 "Realt...
ure0: RTL8152 (0x4c10), address 00:e0:4c:36:12:38
rlphy0 at ure0 phy 0: RTL8201E, rev. 2
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
WARNING: CHECK AND RESET THE DATE!
gpio0 at bcmgpio0: 54 pins
bwfm0: failed loadfirmware of file brcmfmac43430-sdio.r...
- Is that firmware enabled on vanila OpenBSD rather than ...
- I have not been able to confirm it yet, so I apologize ...
- I found brcmfmac43436-sdio.raspberrypi,model-zero-2-w.b...
#aname(update_firmware)
- The procedure to update firmware:
1. on other machine, download the firmware, then save it ...
other_host # ftp http://firmware.openbsd.org/firmware/7....
Trying 2a04:4e42::820...
Requesting http://firmware.openbsd.org/firmware/7.9/bwfm...
100% |**************************************************...
12011326 bytes received in 2.87 seconds (3.98 MB/s)
other_host # mount /dev/sd0d /mnt
other_host # cp bwfm-firmware-20200316.1.3p5.tgz /mnt
other_host # umount /mnt
2. boot FuguIta device, then mount and update the firmware
rpizero2w # mount /dev/sd0d /mnt
rpizero2w # fw_update /mnt/bwfm-firmware-20200316.1.3p5....
fw_update: add bwfm; update none
rpizero2w # rm /bwfm-firmware-20200316.1.3p5.tgz
rpizero2w # umount /mnt
3. [[save the environment>fge2:usbfadm_sync]], then [[reb...
4. [[create Wi-Fi config, then enable it>fge3:netconf]]
~-- [[kaw]] &new{2026-05-28 (Thu) 14:31:25};
- Thank you for taking the time to verify this. I was ab...
#comment
#setlinebreak(off)
#navi(FuguIta/Report)
Page:
![[PukiWiki]](image/pukiwiki.png "[PukiWiki]")
