FuguIta/Report/16
をテンプレートにして作成
Start:
* 7.5-amd64 on [#h5aad79e]
-Posted by chris at 2024-08-22 (Thu) 22:27:40
-Release: 7.5-amd64-202408201
-Media: USB flashdrive
-Hardware: (CPU: x64, Memory: 8GB)
** Remarks [#y7bc1be5]
#setlinebreak(on)
looks like this release is cocked up, booting works and s...
#setlinebreak(off)
----
@chris, I tested again shown below. pkg_add and 'ls -l' w...
Before each release, I run these tests on all platforms t...
Script started on Sun Aug 25 04:39:47 2024
nimbus18$ doas vmctl start -c -i1 -n uplink -m 2G -d Fug...
doas (kaw@nimbus18.honjoji.local) password:
Connected to /dev/ttyp6 (speed 115200)
Using2drive 0, partition 3.
Loading......
probing: pc0 com0 mem[638K 2046M a20=on]
disk: hd0+
>> OpenBSD/amd64 BOOT 3.65
/
>> bsd-fi.mp is for
>> multiprocessor kernel (default).
>> Enter 'bsd-fi' for Uniprocessor.
boot>
cannot open hd0a:/etc/random.seed: No such file or direc...
booting hd0a:/bsd-fi.mp: 17880917+4293640+2363424+0+1236...
entry point at 0xffffffff81001000
[ using 4040048 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All right...
Copyright (c) 1995-2024 OpenBSD. All rights reserved. h...
OpenBSD 7.5-stable (RDROOT.MP) #22: Tue Aug 20 08:22:15 ...
root@nimbus12.localnet:/opt/fi/7.5/sys/arch/amd64/co...
real mem = 2130694144 (2031MB)
avail mem = 2043252736 (1948MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf2760 (10 entries)
bios0: vendor SeaBIOS version "1.16.3p0-OpenBSD-vmm" dat...
bios0: OpenBSD VMM
acpi at bios0 not configured
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel(R) Core(TM) m3-7Y30 CPU @ 1.00GHz, 1608.02 M...
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,CX8,SEP,PGE,CMOV,PAT,PS...
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I...
cpu0: smt 0, core 0, package 0
cpu0: using Skylake AVX MDS workaround
pvbus0 at mainbus0: OpenBSD
pvclock0 at pvbus0
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "OpenBSD VMM Host" rev 0x00
virtio0 at pci0 dev 1 function 0 "Qumranet Virtio RNG" r...
viornd0 at virtio0
virtio0: irq 3
virtio1 at pci0 dev 2 function 0 "Qumranet Virtio Networ...
vio0 at virtio1: address fe:e1:bb:d1:d3:14
virtio1: irq 5
virtio2 at pci0 dev 3 function 0 "Qumranet Virtio Storag...
vioblk0 at virtio2
scsibus1 at vioblk0: 1 targets
sd0 at scsibus1 targ 0 lun 0: <VirtIO, Block Device, >
sd0: 2048MB, 512 bytes/sector, 4194304 sectors
virtio2: irq 6
virtio3 at pci0 dev 4 function 0 "OpenBSD VMM Control" r...
vmmci0 at virtio3
virtio3: irq 7
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns8250, no fifo
com0: console
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on rd0a swap on wd0b dump on rd0b
Hibernate error reading disklabel: cannot open disk, 0x1...
WARNING: clock gained 83 days
WARNING: CHECK AND RESET THE DATE!
==================================================
= ______ __ _
= / ____/ | |_| |__
= / /____ ______ __ _| /_ _/_____
= / ___/ / / / __ \/ / / | | | | / _ |
= / / / /_/ / /_/ / /_/ /| | | |_| (_) |__
= /_/ \____/\__ /\____/ |__| \___/____/__/
= __/ /
= /___/
=
= Welcome to FuguIta - OpenBSD-based Live System
= https://fuguita.org/
===================================================
scanning partitions: sd0a sd0b sd0d sd0i
FuguIta's operating device(s): sd0a.
Which is FuguIta's operating device? [default: sd0a] ->
activating swap partition: /dev/sd0b
available memory: 2031M
total swap size: 16M
Enter mfs size.
You can add suffix K, M, or G.
% is a percentage of memory size.
and %% is a percentage of the total memory and swap.
otherwise considered "megabytes"
[default: 1523M] ->
set mfs size to 1523MB
Boot modes:
0: fresh boot - standard mode as a live system
1: fresh boot - less memory, faster boot
(/usr is non-writable, can't pkg_add)
2: fresh boot - works using only RAM
(about 1GB or more of RAM required)
3: boot with retrieving saved files from storage device
or enter passphrase for an encrypted volume
4: boot with retrieving saved files from floppy disk
5: interactive shell for maintenance
-> 0
Running manual setup.
Copying system files to /ram ... done
Extracting symlinks from /ram to /fuguita ... done
Changing password for root.
New password:
Retype new password:
passwd: password updated successfully
Hostname with domain part (FQDN):
only host name without domain part is also OK.
-> fitest75.local
IP protocol version(s) to be enabled: 4, 6, 46, 64 or "n...
4: enable only IPv4
6: enable only IPv6
46: give priority to IPv4 name resolution
64: give priority to IPv6 name resolution
none: operate as standalone
[64] ->
Network Interfaces: Choose one
NIC type Name
-------- ----- ------------
vio0 ether unknown
[vio0] ->
IPv6 - address and routing:
Enter "auto" or "IPv6_address[/prefixlen] [default_gat...
"auto" is an automatic setting by SLAAC.
The "/prefixlen" part can be an integer between 0 and ...
If there is no default gateway,
set the second field to "none" or leave it blank.
[auto] ->
IPv4 - address and routing:
Enter "auto" or "IPv4_address[/mask] [default_gateway]"
"auto" is an automatic setting by DHCP.
The "/mask" part can be specified in either format,
such as "/255.255.255.0" or "/24".
If there is no default gateway,
set the second field to "none" or leave it blank.
[auto] -> 192.168.65.65/24 192.168.65.254
DNS servers: up to 3 IP addresses, separated by spaces
-> 192.168.65.254
writing configured values to:
/etc/fuguita/netconfs/default/description
/etc/fuguita/netconfs/default/myname
/etc/fuguita/netconfs/default/mygate
/etc/fuguita/netconfs/default/hosts
/etc/fuguita/netconfs/default/hostname.vio0
/etc/fuguita/netconfs/default/resolv.conf
Do you login with C)onsole or X) Window System?
[default: C] ->
_________________________________________________
/ Setup for FuguIta ends. /
/ OpenBSD's boot sequence will follow. /
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Automatic boot in progress: starting file system checks.
pf enabled
machdep.lidaction: 1 -> 0
net.inet.ip.forwarding: 0 -> 0
net.inet.ip.mforwarding: 0 -> 0
net.inet6.ip6.forwarding: 0 -> 0
net.inet6.ip6.mforwarding: 0 -> 0
starting network
reordering: ld.so libc libcrypto sshd.
openssl: generating isakmpd RSA keys... done.
openssl: generating iked ECDSA keys... done.
ssh-keygen: generating new host keys: RSA ECDSA ED25519
sshd: (ED25519) SHA256:QlHh3F2vwx4Wt+breHnPK5TzJTECi/XtA...
starting early daemons: syslogd pflogd ntpd.
starting RPC daemons:.
savecore: can't find device 17/1
checking quotas: done.
clearing /tmp
kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
starting network daemons: sshd smtpd sndiod.
running rc.firsttime
Get/Verify intel-firmware-20240514v0.tgz ... installed.
fw_update: add intel; update none
starting local daemons: cron.
fuguita: disabled KARL because of read-only media
Sat Aug 24 19:43:18 UTC 2024
OpenBSD/amd64 (fitest75.local) (tty00)
login: root
Password:
OpenBSD 7.5-stable (RDROOT.MP) #22: Tue Aug 20 08:22:15 ...
Welcome to FuguIta, the OpenBSD-based live system.
FuguIta aims to help popularize OpenBSD operating system...
to get started with.
For information on FuguIta's specific features and how t...
refer to the documentation on https://fuguita.org/.
If you have any questions or suggestions for FuguIta, pl...
me or post a message to fuguita.org's message board.
Please feel free to contact me.
Yoshihiro Kawamata
kaw@on.rim.or.jp , https://fuguita.org/
You have new mail.
fitest75# uname -a
OpenBSD fitest75.local 7.5 RDROOT.MP#22 amd64
fitest75# sysctl kern.version
kern.version=OpenBSD 7.5-stable (RDROOT.MP) #22: Tue Aug...
root@nimbus12.localnet:/opt/fi/7.5/sys/arch/amd64/co...
fitest75# cat /usr/fuguita/version
7.5-amd64-202408201
fitest75# ls -l
total 12
-rw------- 1 root wheel 0 Aug 24 19:42 .Xauthority
-rw-r--r-- 1 root wheel 87 Aug 13 06:58 .Xdefaults
-rw-r--r-- 1 root wheel 578 Aug 13 06:58 .cshrc
-rw-r--r-- 1 root wheel 94 Aug 13 06:58 .cvsrc
-rw-r--r-- 1 root wheel 242 Aug 13 06:58 .login
-rw-r--r-- 1 root wheel 423 Aug 24 19:42 .profile
drwx------ 2 root wheel 512 Aug 19 23:29 .ssh
fitest75# pkg_add neofetch
quirks-7.14: ok
neofetch-7.1.0p0:bash-5.2.26: ok
neofetch-7.1.0p0: ok
fitest75# neofetch --stdout
root@fitest75.local
-------------------
OS: OpenBSD 7.5-stable amd64
Host: vmm (OpenBSD VMM)
Uptime: 2 mins
Packages: 10 (pkg_info)
Shell: ksh v5.2.14 99/07/13.2
Terminal: /dev/tty00
CPU: Intel m3-7Y30 (1) @ 1.608GHz
Memory: 176MiB / 2031MiB
fitest75# halt -p
syncing disks... done
vmmci0: powerdown
The operating system has halted.
Please press any key to reboot.
[EOT]
nimbus18$
Please check your boot time configurations and/or your ha...
#navi(FuguIta/Report)
End:
* 7.5-amd64 on [#h5aad79e]
-Posted by chris at 2024-08-22 (Thu) 22:27:40
-Release: 7.5-amd64-202408201
-Media: USB flashdrive
-Hardware: (CPU: x64, Memory: 8GB)
** Remarks [#y7bc1be5]
#setlinebreak(on)
looks like this release is cocked up, booting works and s...
#setlinebreak(off)
----
@chris, I tested again shown below. pkg_add and 'ls -l' w...
Before each release, I run these tests on all platforms t...
Script started on Sun Aug 25 04:39:47 2024
nimbus18$ doas vmctl start -c -i1 -n uplink -m 2G -d Fug...
doas (kaw@nimbus18.honjoji.local) password:
Connected to /dev/ttyp6 (speed 115200)
Using2drive 0, partition 3.
Loading......
probing: pc0 com0 mem[638K 2046M a20=on]
disk: hd0+
>> OpenBSD/amd64 BOOT 3.65
/
>> bsd-fi.mp is for
>> multiprocessor kernel (default).
>> Enter 'bsd-fi' for Uniprocessor.
boot>
cannot open hd0a:/etc/random.seed: No such file or direc...
booting hd0a:/bsd-fi.mp: 17880917+4293640+2363424+0+1236...
entry point at 0xffffffff81001000
[ using 4040048 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All right...
Copyright (c) 1995-2024 OpenBSD. All rights reserved. h...
OpenBSD 7.5-stable (RDROOT.MP) #22: Tue Aug 20 08:22:15 ...
root@nimbus12.localnet:/opt/fi/7.5/sys/arch/amd64/co...
real mem = 2130694144 (2031MB)
avail mem = 2043252736 (1948MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf2760 (10 entries)
bios0: vendor SeaBIOS version "1.16.3p0-OpenBSD-vmm" dat...
bios0: OpenBSD VMM
acpi at bios0 not configured
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel(R) Core(TM) m3-7Y30 CPU @ 1.00GHz, 1608.02 M...
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,CX8,SEP,PGE,CMOV,PAT,PS...
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I...
cpu0: smt 0, core 0, package 0
cpu0: using Skylake AVX MDS workaround
pvbus0 at mainbus0: OpenBSD
pvclock0 at pvbus0
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "OpenBSD VMM Host" rev 0x00
virtio0 at pci0 dev 1 function 0 "Qumranet Virtio RNG" r...
viornd0 at virtio0
virtio0: irq 3
virtio1 at pci0 dev 2 function 0 "Qumranet Virtio Networ...
vio0 at virtio1: address fe:e1:bb:d1:d3:14
virtio1: irq 5
virtio2 at pci0 dev 3 function 0 "Qumranet Virtio Storag...
vioblk0 at virtio2
scsibus1 at vioblk0: 1 targets
sd0 at scsibus1 targ 0 lun 0: <VirtIO, Block Device, >
sd0: 2048MB, 512 bytes/sector, 4194304 sectors
virtio2: irq 6
virtio3 at pci0 dev 4 function 0 "OpenBSD VMM Control" r...
vmmci0 at virtio3
virtio3: irq 7
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns8250, no fifo
com0: console
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on rd0a swap on wd0b dump on rd0b
Hibernate error reading disklabel: cannot open disk, 0x1...
WARNING: clock gained 83 days
WARNING: CHECK AND RESET THE DATE!
==================================================
= ______ __ _
= / ____/ | |_| |__
= / /____ ______ __ _| /_ _/_____
= / ___/ / / / __ \/ / / | | | | / _ |
= / / / /_/ / /_/ / /_/ /| | | |_| (_) |__
= /_/ \____/\__ /\____/ |__| \___/____/__/
= __/ /
= /___/
=
= Welcome to FuguIta - OpenBSD-based Live System
= https://fuguita.org/
===================================================
scanning partitions: sd0a sd0b sd0d sd0i
FuguIta's operating device(s): sd0a.
Which is FuguIta's operating device? [default: sd0a] ->
activating swap partition: /dev/sd0b
available memory: 2031M
total swap size: 16M
Enter mfs size.
You can add suffix K, M, or G.
% is a percentage of memory size.
and %% is a percentage of the total memory and swap.
otherwise considered "megabytes"
[default: 1523M] ->
set mfs size to 1523MB
Boot modes:
0: fresh boot - standard mode as a live system
1: fresh boot - less memory, faster boot
(/usr is non-writable, can't pkg_add)
2: fresh boot - works using only RAM
(about 1GB or more of RAM required)
3: boot with retrieving saved files from storage device
or enter passphrase for an encrypted volume
4: boot with retrieving saved files from floppy disk
5: interactive shell for maintenance
-> 0
Running manual setup.
Copying system files to /ram ... done
Extracting symlinks from /ram to /fuguita ... done
Changing password for root.
New password:
Retype new password:
passwd: password updated successfully
Hostname with domain part (FQDN):
only host name without domain part is also OK.
-> fitest75.local
IP protocol version(s) to be enabled: 4, 6, 46, 64 or "n...
4: enable only IPv4
6: enable only IPv6
46: give priority to IPv4 name resolution
64: give priority to IPv6 name resolution
none: operate as standalone
[64] ->
Network Interfaces: Choose one
NIC type Name
-------- ----- ------------
vio0 ether unknown
[vio0] ->
IPv6 - address and routing:
Enter "auto" or "IPv6_address[/prefixlen] [default_gat...
"auto" is an automatic setting by SLAAC.
The "/prefixlen" part can be an integer between 0 and ...
If there is no default gateway,
set the second field to "none" or leave it blank.
[auto] ->
IPv4 - address and routing:
Enter "auto" or "IPv4_address[/mask] [default_gateway]"
"auto" is an automatic setting by DHCP.
The "/mask" part can be specified in either format,
such as "/255.255.255.0" or "/24".
If there is no default gateway,
set the second field to "none" or leave it blank.
[auto] -> 192.168.65.65/24 192.168.65.254
DNS servers: up to 3 IP addresses, separated by spaces
-> 192.168.65.254
writing configured values to:
/etc/fuguita/netconfs/default/description
/etc/fuguita/netconfs/default/myname
/etc/fuguita/netconfs/default/mygate
/etc/fuguita/netconfs/default/hosts
/etc/fuguita/netconfs/default/hostname.vio0
/etc/fuguita/netconfs/default/resolv.conf
Do you login with C)onsole or X) Window System?
[default: C] ->
_________________________________________________
/ Setup for FuguIta ends. /
/ OpenBSD's boot sequence will follow. /
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Automatic boot in progress: starting file system checks.
pf enabled
machdep.lidaction: 1 -> 0
net.inet.ip.forwarding: 0 -> 0
net.inet.ip.mforwarding: 0 -> 0
net.inet6.ip6.forwarding: 0 -> 0
net.inet6.ip6.mforwarding: 0 -> 0
starting network
reordering: ld.so libc libcrypto sshd.
openssl: generating isakmpd RSA keys... done.
openssl: generating iked ECDSA keys... done.
ssh-keygen: generating new host keys: RSA ECDSA ED25519
sshd: (ED25519) SHA256:QlHh3F2vwx4Wt+breHnPK5TzJTECi/XtA...
starting early daemons: syslogd pflogd ntpd.
starting RPC daemons:.
savecore: can't find device 17/1
checking quotas: done.
clearing /tmp
kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
starting network daemons: sshd smtpd sndiod.
running rc.firsttime
Get/Verify intel-firmware-20240514v0.tgz ... installed.
fw_update: add intel; update none
starting local daemons: cron.
fuguita: disabled KARL because of read-only media
Sat Aug 24 19:43:18 UTC 2024
OpenBSD/amd64 (fitest75.local) (tty00)
login: root
Password:
OpenBSD 7.5-stable (RDROOT.MP) #22: Tue Aug 20 08:22:15 ...
Welcome to FuguIta, the OpenBSD-based live system.
FuguIta aims to help popularize OpenBSD operating system...
to get started with.
For information on FuguIta's specific features and how t...
refer to the documentation on https://fuguita.org/.
If you have any questions or suggestions for FuguIta, pl...
me or post a message to fuguita.org's message board.
Please feel free to contact me.
Yoshihiro Kawamata
kaw@on.rim.or.jp , https://fuguita.org/
You have new mail.
fitest75# uname -a
OpenBSD fitest75.local 7.5 RDROOT.MP#22 amd64
fitest75# sysctl kern.version
kern.version=OpenBSD 7.5-stable (RDROOT.MP) #22: Tue Aug...
root@nimbus12.localnet:/opt/fi/7.5/sys/arch/amd64/co...
fitest75# cat /usr/fuguita/version
7.5-amd64-202408201
fitest75# ls -l
total 12
-rw------- 1 root wheel 0 Aug 24 19:42 .Xauthority
-rw-r--r-- 1 root wheel 87 Aug 13 06:58 .Xdefaults
-rw-r--r-- 1 root wheel 578 Aug 13 06:58 .cshrc
-rw-r--r-- 1 root wheel 94 Aug 13 06:58 .cvsrc
-rw-r--r-- 1 root wheel 242 Aug 13 06:58 .login
-rw-r--r-- 1 root wheel 423 Aug 24 19:42 .profile
drwx------ 2 root wheel 512 Aug 19 23:29 .ssh
fitest75# pkg_add neofetch
quirks-7.14: ok
neofetch-7.1.0p0:bash-5.2.26: ok
neofetch-7.1.0p0: ok
fitest75# neofetch --stdout
root@fitest75.local
-------------------
OS: OpenBSD 7.5-stable amd64
Host: vmm (OpenBSD VMM)
Uptime: 2 mins
Packages: 10 (pkg_info)
Shell: ksh v5.2.14 99/07/13.2
Terminal: /dev/tty00
CPU: Intel m3-7Y30 (1) @ 1.608GHz
Memory: 176MiB / 2031MiB
fitest75# halt -p
syncing disks... done
vmmci0: powerdown
The operating system has halted.
Please press any key to reboot.
[EOT]
nimbus18$
Please check your boot time configurations and/or your ha...
#navi(FuguIta/Report)
Page: