Edit of
FuguIta/Report/35
https://fuguita.org/?FuguIta/Report/35
-- Use page as template --
(no template pages)
* 7.8-macppc on PowerBook6,1 [#a9c3ff5a] -Posted by kaw at 2025-12-30 (Tue) 13:28:37 -Release: 7.8-macppc-202512291 -Media: other -Hardware: PowerBook6,1 (CPU: 7455 (Revision 0x303), Memory: 671088640 (640MB)) ** Remarks [#eaa0e543] #setlinebreak(on) #FuguIta 7.8 has been ported to the macppc architecture. Development and testing have been performed on a PowerBook G4 (6,1). - Direct booting from LiveUSB is not possible. In that case, boot from LiveDVD and switch operations to the USB memory during the boot process. - Creating FuguIta based on the GENERIC kernel causes a freeze when control transfers from the bootloader to the kernel. Currently, only the device drivers needed for the PowerBook G4 are included. - For WiFi's bwi(4), executing ''ifconfig bwi0 up'' after ''fw_update'' causes a kernel panic. - X Window cannot be used. The following error occurs: [ 66661.067] (II) Loading sub module “vgahw” [ 66661.067] (II) LoadModule: “vgahw” [ 66661.084] (II) Loading /usr/X11R6/lib/modules/libvgahw.so [ 66661.127] (II) Module vgahw: vendor="X.Org Foundation" [ 66661.127] compiled for 1.21.1.18, module version = 0.1.0 [ 66661.127] ABI class: X.Org Video Driver, version 25.2 [ 66661.170] (==) NV(0): Using HW cursor [ 66661.170] (--) NV(0): Linear framebuffer at 0x94000000 [ 66661.170] (--) NV(0): MMIO registers at 0x91000000 [ 66661.280] (EE) NV(0): pci_device_map_range failed: Invalid argument [ 66661.280] (EE) Segmentation fault at address 0x4 [ 66661.281] (EE) Fatal server error: [ 66661.282] (EE) Caught signal 11 (Segmentation fault). Server aborting dmesg is as follows: [ using 709700 bytes of bsd ELF symbol table ] console out [NVDA,Display-A] console in [keyboard]USB and ADB found, using ADB using parent NVDA,Parent:: memaddr 94000000, size 4000000 : consaddr 94004000 : ioaddr 91000000, size 1000000: width 1024 linebytes 1024 height 768 depth 8 Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2025 OpenBSD. All rights reserved. https://www.OpenBSD.org OpenBSD 7.8-stable (RDROOT.MP) #0: Mon Dec 29 12:59:06 JST 2025 kaw@nimbus34.localnet:/opt/fi/7.8/sys/arch/macppc/compile/RDROOT.MP real mem = 671088640 (640MB) avail mem = 632184832 (602MB) random: good seed from bootblocks mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root: model PowerBook6,1 cpu0 at mainbus0: 7455 (Revision 0x303): 533 MHz: 256KB L2 cache mem0 at mainbus0 spdmem0 at mem0: no EEPROM found spdmem1 at mem0: 512MB DDR SDRAM non-parity PC2100CL2.5 memc0 at mainbus0: uni-n rev 0xd2 "hw-clock" at memc0 not configured kiic0 at memc0 offset 0xf8001000 iic0 at kiic0 admtmp0 at iic0 addr 0xac mpcpcibr0 at mainbus0 pci: uni-north pci0 at mpcpcibr0 bus 0 pchb0 at pci0 dev 11 function 0 "Apple UniNorth AGP" rev 0x00 vgafb0 at pci0 dev 16 function 0 "NVIDIA GeForce4 440 Go 64M" rev 0xa3 vgafb0: aperture needed wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation) wsdisplay0: screen 1-5 added (std, vt100 emulation) mpcpcibr1 at mainbus0 pci: uni-north pci1 at mpcpcibr1 bus 0 macobio0 at pci1 dev 23 function 0 "Apple Intrepid" rev 0x00 openpic0 at macobio0 offset 0x40000: version 0x4614 feature 3f0302 LE macgpio0 at macobio0 offset 0x50 macgpio1 at macgpio0 offset 0x9: irq 47 "programmer-switch" at macgpio0 offset 0x11 not configured "gpio4" at macgpio0 offset 0x1e not configured "gpio5" at macgpio0 offset 0x6f not configured "gpio6" at macgpio0 offset 0x70 not configured "extint-gpio4" at macgpio0 offset 0x5c not configured "gpio11" at macgpio0 offset 0x75 not configured "extint-gpio15" at macgpio0 offset 0x67 not configured "escc-legacy" at macobio0 offset 0x12000 not configured zs0 at macobio0 offset 0x13000: irq 22,23 zstty0 at zs0 channel 0 zstty1 at zs0 channel 1 snapper0 at macobio0 offset 0x10000: irq 30,1,2 "timer" at macobio0 offset 0x15000 not configured adb0 at macobio0 offset 0x16000: irq 25, via-pmu, 3 targets apm0 at adb0: battery flags 0x5, 99% charged piic0 at adb0 iic1 at piic0 akbd0 at adb0 addr 2: PowerBook G3 keyboard (Japanese layout) wskbd0 at akbd0: console keyboard, using wsdisplay0 ams0 at adb0 addr 3: EMP trackpad <tpad> 2-button, 400 dpi wsmouse0 at ams0 mux 0 abtn0 at adb0 addr 7: brightness/volume/eject buttons "battery" at macobio0 offset 0x0 not configured "backlight" at macobio0 offset 0xf300 not configured kiic1 at macobio0 offset 0x18000 iic2 at kiic1 wdc0 at macobio0 offset 0x20000 irq 24: DMA atapiscsi0 at wdc0 channel 0 drive 0 scsibus1 at atapiscsi0: 2 targets cd0 at scsibus1 targ 0 lun 0: <MATSHITA, DVD-R UJ-815, D0CB> removable cd0(wdc0:0:0): using BIOS timings, DMA mode 2 audio0 at snapper0 bwi0 at pci1 dev 18 function 0 "Broadcom BCM4306" rev 0x02: irq 52, address 00:03:93:ef:0f:26 ohci0 at pci1 dev 24 function 0 "Apple Intrepid USB" rev 0x00: irq 27, version 1.0, legacy support ohci1 at pci1 dev 25 function 0 "Apple Intrepid USB" rev 0x00: irq 28, version 1.0, legacy support ohci2 at pci1 dev 26 function 0 "Apple Intrepid USB" rev 0x00: irq 29, version 1.0, legacy support usb0 at ohci0: USB revision 1.0 uhub0 at usb0 configuration 1 interface 0 "Apple OHCI root hub" rev 1.00/1.00 addr 1 usb1 at ohci1: USB revision 1.0 uhub1 at usb1 configuration 1 interface 0 "Apple OHCI root hub" rev 1.00/1.00 addr 1 usb2 at ohci2: USB revision 1.0 uhub2 at usb2 configuration 1 interface 0 "Apple OHCI root hub" rev 1.00/1.00 addr 1 mpcpcibr2 at mainbus0 pci: uni-north pci2 at mpcpcibr2 bus 0 kauaiata0 at pci2 dev 13 function 0 "Apple Intrepid ATA" rev 0x00 wdc1 at kauaiata0 irq 39: DMA wd0 at wdc1 channel 0 drive 0: <FUJITSU MHS2040AT D> wd0: 16-sector PIO, LBA48, 38154MB, 78140160 sectors wd0(wdc1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 "Apple UniNorth Firewire" rev 0x81 at pci2 dev 14 function 0 not configured gem0 at pci2 dev 15 function 0 "Apple Uni-N2 GMAC" rev 0x80: irq 41, address 00:0a:95:7d:c0:cc bmtphy0 at gem0 phy 0: BCM5221, rev. 4 umass0 at uhub0 port 1 configuration 1 interface 0 "BUFFALO USB Flash Disk" rev 2.00/40.00 addr 2 umass0: using SCSI over Bulk-Only scsibus2 at umass0: 2 targets, initiator 0 sd0 at scsibus2 targ 1 lun 0: <BUFFALO, USB Flash Disk, 4000> removable serial.04110110105310500341 sd0: 15480MB, 512 bytes/sector, 31703040 sectors uhidev0 at uhub0 port 2 configuration 1 interface 0 "Apple Computer HID-proxy" rev 2.00/15.86 addr 3 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub0 port 2 configuration 1 interface 1 "Apple Computer HID-proxy" rev 2.00/15.86 addr 3 uhidev1: iclass 3/1 ums0 at uhidev1: 5 buttons wsmouse1 at ums0 mux 0 vscsi0 at root scsibus3 at vscsi0: 256 targets softraid0 at root scsibus4 at softraid0: 256 targets bootpath: /pci@f4000000/ata-6@d/disk@0:/bsd-fi.mp root on rd0a swap on rd0b dump on rd0b #setlinebreak(off) #navi(FuguIta/Report)
Do not change timestamp
* 7.8-macppc on PowerBook6,1 [#a9c3ff5a] -Posted by kaw at 2025-12-30 (Tue) 13:28:37 -Release: 7.8-macppc-202512291 -Media: other -Hardware: PowerBook6,1 (CPU: 7455 (Revision 0x303), Memory: 671088640 (640MB)) ** Remarks [#eaa0e543] #setlinebreak(on) #FuguIta 7.8 has been ported to the macppc architecture. Development and testing have been performed on a PowerBook G4 (6,1). - Direct booting from LiveUSB is not possible. In that case, boot from LiveDVD and switch operations to the USB memory during the boot process. - Creating FuguIta based on the GENERIC kernel causes a freeze when control transfers from the bootloader to the kernel. Currently, only the device drivers needed for the PowerBook G4 are included. - For WiFi's bwi(4), executing ''ifconfig bwi0 up'' after ''fw_update'' causes a kernel panic. - X Window cannot be used. The following error occurs: [ 66661.067] (II) Loading sub module “vgahw” [ 66661.067] (II) LoadModule: “vgahw” [ 66661.084] (II) Loading /usr/X11R6/lib/modules/libvgahw.so [ 66661.127] (II) Module vgahw: vendor="X.Org Foundation" [ 66661.127] compiled for 1.21.1.18, module version = 0.1.0 [ 66661.127] ABI class: X.Org Video Driver, version 25.2 [ 66661.170] (==) NV(0): Using HW cursor [ 66661.170] (--) NV(0): Linear framebuffer at 0x94000000 [ 66661.170] (--) NV(0): MMIO registers at 0x91000000 [ 66661.280] (EE) NV(0): pci_device_map_range failed: Invalid argument [ 66661.280] (EE) Segmentation fault at address 0x4 [ 66661.281] (EE) Fatal server error: [ 66661.282] (EE) Caught signal 11 (Segmentation fault). Server aborting dmesg is as follows: [ using 709700 bytes of bsd ELF symbol table ] console out [NVDA,Display-A] console in [keyboard]USB and ADB found, using ADB using parent NVDA,Parent:: memaddr 94000000, size 4000000 : consaddr 94004000 : ioaddr 91000000, size 1000000: width 1024 linebytes 1024 height 768 depth 8 Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2025 OpenBSD. All rights reserved. https://www.OpenBSD.org OpenBSD 7.8-stable (RDROOT.MP) #0: Mon Dec 29 12:59:06 JST 2025 kaw@nimbus34.localnet:/opt/fi/7.8/sys/arch/macppc/compile/RDROOT.MP real mem = 671088640 (640MB) avail mem = 632184832 (602MB) random: good seed from bootblocks mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root: model PowerBook6,1 cpu0 at mainbus0: 7455 (Revision 0x303): 533 MHz: 256KB L2 cache mem0 at mainbus0 spdmem0 at mem0: no EEPROM found spdmem1 at mem0: 512MB DDR SDRAM non-parity PC2100CL2.5 memc0 at mainbus0: uni-n rev 0xd2 "hw-clock" at memc0 not configured kiic0 at memc0 offset 0xf8001000 iic0 at kiic0 admtmp0 at iic0 addr 0xac mpcpcibr0 at mainbus0 pci: uni-north pci0 at mpcpcibr0 bus 0 pchb0 at pci0 dev 11 function 0 "Apple UniNorth AGP" rev 0x00 vgafb0 at pci0 dev 16 function 0 "NVIDIA GeForce4 440 Go 64M" rev 0xa3 vgafb0: aperture needed wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation) wsdisplay0: screen 1-5 added (std, vt100 emulation) mpcpcibr1 at mainbus0 pci: uni-north pci1 at mpcpcibr1 bus 0 macobio0 at pci1 dev 23 function 0 "Apple Intrepid" rev 0x00 openpic0 at macobio0 offset 0x40000: version 0x4614 feature 3f0302 LE macgpio0 at macobio0 offset 0x50 macgpio1 at macgpio0 offset 0x9: irq 47 "programmer-switch" at macgpio0 offset 0x11 not configured "gpio4" at macgpio0 offset 0x1e not configured "gpio5" at macgpio0 offset 0x6f not configured "gpio6" at macgpio0 offset 0x70 not configured "extint-gpio4" at macgpio0 offset 0x5c not configured "gpio11" at macgpio0 offset 0x75 not configured "extint-gpio15" at macgpio0 offset 0x67 not configured "escc-legacy" at macobio0 offset 0x12000 not configured zs0 at macobio0 offset 0x13000: irq 22,23 zstty0 at zs0 channel 0 zstty1 at zs0 channel 1 snapper0 at macobio0 offset 0x10000: irq 30,1,2 "timer" at macobio0 offset 0x15000 not configured adb0 at macobio0 offset 0x16000: irq 25, via-pmu, 3 targets apm0 at adb0: battery flags 0x5, 99% charged piic0 at adb0 iic1 at piic0 akbd0 at adb0 addr 2: PowerBook G3 keyboard (Japanese layout) wskbd0 at akbd0: console keyboard, using wsdisplay0 ams0 at adb0 addr 3: EMP trackpad <tpad> 2-button, 400 dpi wsmouse0 at ams0 mux 0 abtn0 at adb0 addr 7: brightness/volume/eject buttons "battery" at macobio0 offset 0x0 not configured "backlight" at macobio0 offset 0xf300 not configured kiic1 at macobio0 offset 0x18000 iic2 at kiic1 wdc0 at macobio0 offset 0x20000 irq 24: DMA atapiscsi0 at wdc0 channel 0 drive 0 scsibus1 at atapiscsi0: 2 targets cd0 at scsibus1 targ 0 lun 0: <MATSHITA, DVD-R UJ-815, D0CB> removable cd0(wdc0:0:0): using BIOS timings, DMA mode 2 audio0 at snapper0 bwi0 at pci1 dev 18 function 0 "Broadcom BCM4306" rev 0x02: irq 52, address 00:03:93:ef:0f:26 ohci0 at pci1 dev 24 function 0 "Apple Intrepid USB" rev 0x00: irq 27, version 1.0, legacy support ohci1 at pci1 dev 25 function 0 "Apple Intrepid USB" rev 0x00: irq 28, version 1.0, legacy support ohci2 at pci1 dev 26 function 0 "Apple Intrepid USB" rev 0x00: irq 29, version 1.0, legacy support usb0 at ohci0: USB revision 1.0 uhub0 at usb0 configuration 1 interface 0 "Apple OHCI root hub" rev 1.00/1.00 addr 1 usb1 at ohci1: USB revision 1.0 uhub1 at usb1 configuration 1 interface 0 "Apple OHCI root hub" rev 1.00/1.00 addr 1 usb2 at ohci2: USB revision 1.0 uhub2 at usb2 configuration 1 interface 0 "Apple OHCI root hub" rev 1.00/1.00 addr 1 mpcpcibr2 at mainbus0 pci: uni-north pci2 at mpcpcibr2 bus 0 kauaiata0 at pci2 dev 13 function 0 "Apple Intrepid ATA" rev 0x00 wdc1 at kauaiata0 irq 39: DMA wd0 at wdc1 channel 0 drive 0: <FUJITSU MHS2040AT D> wd0: 16-sector PIO, LBA48, 38154MB, 78140160 sectors wd0(wdc1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 "Apple UniNorth Firewire" rev 0x81 at pci2 dev 14 function 0 not configured gem0 at pci2 dev 15 function 0 "Apple Uni-N2 GMAC" rev 0x80: irq 41, address 00:0a:95:7d:c0:cc bmtphy0 at gem0 phy 0: BCM5221, rev. 4 umass0 at uhub0 port 1 configuration 1 interface 0 "BUFFALO USB Flash Disk" rev 2.00/40.00 addr 2 umass0: using SCSI over Bulk-Only scsibus2 at umass0: 2 targets, initiator 0 sd0 at scsibus2 targ 1 lun 0: <BUFFALO, USB Flash Disk, 4000> removable serial.04110110105310500341 sd0: 15480MB, 512 bytes/sector, 31703040 sectors uhidev0 at uhub0 port 2 configuration 1 interface 0 "Apple Computer HID-proxy" rev 2.00/15.86 addr 3 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub0 port 2 configuration 1 interface 1 "Apple Computer HID-proxy" rev 2.00/15.86 addr 3 uhidev1: iclass 3/1 ums0 at uhidev1: 5 buttons wsmouse1 at ums0 mux 0 vscsi0 at root scsibus3 at vscsi0: 256 targets softraid0 at root scsibus4 at softraid0: 256 targets bootpath: /pci@f4000000/ata-6@d/disk@0:/bsd-fi.mp root on rd0a swap on rd0b dump on rd0b #setlinebreak(off) #navi(FuguIta/Report)
View Text Formatting Rules
![[PukiWiki]](image/pukiwiki.png "[PukiWiki]")
