#author("2023-02-16T13:47:43+09:00","default:kaw","kaw") #navi(FuguItaGuide) This chapter describes the basic procedure when the system is booted and ready for use. We will also point out sources of information that may be helpful for those unfamiliar with Unix-like operating systems, and for those with experience using other Unix-like operating systems. #contents #aname(firstlogin) * Login for the first time [#cb54daf8] **Log in as root [#j9dcb23b] Once FuguIta has finished booting, you will be presented with the OpenBSD operating system login screen. ~ At first, only the superuser account can log in, so enter ``root'' at the ``login:'' prompt, and enter the password you set at startup at the ``Password:'' prompt. OpenBSD/amd64 (fugu-demo.localnet) (tty00) login: root Password: OpenBSD 7.2-stable (RDROOT.MP) #28: Fri Feb 3 11:29:19 JST 2023 Welcome to FuguIta, the OpenBSD-based live system. FuguIta aims to help popularize OpenBSD operating system by making it easier to get started with. For information on FuguIta's specific features and how to use them, please refer to the documentation on https://fuguita.org/. If you have any questions or suggestions for FuguIta, please send an email to me or post a message to fuguita.org's message board. Please feel free to contact me. Yoshihiro Kawamata kaw@on.rim.or.jp , https://fuguita.org/ You have new mail. fugu-demo# If the login is successful, the shell prompt "fugu-demo#" will be displayed and commands can be executed. ~ As an example, let's run the command ps. fugu-demo# ps -aux USER PID %CPU %MEM VSZ RSS TT STAT STARTED TIME COMMAND root 68528 3.6 0.1 868 884 00 Sp 6:51AM 0:01.89 -ksh (ksh) root 1 0.0 0.1 884 532 ?? I 6:40AM 0:01.68 /sbin/init root 14453 0.0 0.1 792 644 ?? Ip 6:43AM 0:00.47 /sbin/slaacd _slaacd 53995 0.0 0.1 812 784 ?? Ip 6:43AM 0:00.81 slaacd: engi _slaacd 33982 0.0 0.1 800 732 ?? Ip 6:43AM 0:00.81 slaacd: fron root 55401 0.0 0.1 712 548 ?? IU 6:44AM 0:00.17 dhclient: em _dhcp 78950 0.0 0.1 840 700 ?? Ip 6:44AM 0:00.10 dhclient: em root 86344 0.0 0.2 520 2184 ?? IpU 6:46AM 0:00.64 syslogd: [pr _syslogd 45328 0.0 0.1 1128 1488 ?? Sp 6:46AM 0:01.04 /usr/sbin/sy root 73380 0.0 0.1 836 584 ?? IU 6:46AM 0:00.27 pflogd: [pri _pflogd 53476 0.0 0.1 876 540 ?? Sp 6:46AM 0:02.97 pflogd: [run _ntp 63935 0.0 0.3 1016 2868 ?? S<p 6:47AM 0:02.87 ntpd: ntp en _ntp 18769 0.0 0.2 820 2508 ?? Ip 6:47AM 0:01.86 ntpd: dns en root 34145 0.0 0.2 788 1568 ?? S<pU 6:47AM 0:00.81 /usr/sbin/nt root 63360 0.0 0.1 1324 1280 ?? I 6:47AM 0:00.37 sshd: /usr/s root 61566 0.0 0.2 1680 2052 ?? Ip 6:48AM 0:00.82 /usr/sbin/sm _smtpd 19845 0.0 0.4 1448 3940 ?? Ip 6:48AM 0:01.83 smtpd: klond _smtpd 66321 0.0 0.4 1716 4240 ?? Ip 6:48AM 0:02.23 smtpd: contr _smtpd 91561 0.0 0.4 1552 4164 ?? Ip 6:48AM 0:01.95 smtpd: looku _smtpd 90688 0.0 0.4 1844 4396 ?? Ip 6:48AM 0:02.69 smtpd: pony _smtpq 16446 0.0 0.4 1640 4252 ?? Ip 6:48AM 0:02.47 smtpd: queue _smtpd 82450 0.0 0.4 1440 3988 ?? Ip 6:48AM 0:02.17 smtpd: sched _sndio 66682 0.0 0.1 516 744 ?? I<p 6:48AM 0:00.17 /usr/bin/snd _sndiop 92235 0.0 0.1 504 920 ?? IpU 6:48AM 0:00.08 sndiod: help root 1376 0.0 0.1 672 1268 ?? Sp 6:51AM 0:00.84 /usr/sbin/cr root 6575 0.0 0.0 484 360 00 R+pU/0 7:32AM 0:00.35 ps -aux root 13541 0.0 0.1 288 1296 C0 I+pU 6:51AM 0:00.58 /usr/libexec root 70324 0.0 0.1 292 1308 C1 I+pU 6:51AM 0:00.54 /usr/libexec root 10475 0.0 0.1 296 1312 C2 I+pU 6:51AM 0:00.44 /usr/libexec root 81779 0.0 0.1 292 1304 C3 I+pU 6:51AM 0:00.58 /usr/libexec root 45364 0.0 0.1 284 1280 C5 I+pU 6:51AM 0:00.47 /usr/libexec fugu-demo# ps is a command that displays what programs (processes) are currently running. ~ Even if the system is just starting up and it looks like there is no movement on the screen, you can see that many processes have already been started internally. From now on, I will explain the settings that should be done when you log in as root for the first time. *** Change time zone [#j329c68f] FuguIta immediately after booting in mode 0 has the time zone (time zone) set to UTC (Universal Coordinated Time). ~ Japan Standard Time (JST) is 9 hours ahead of Coordinated Universal Time. fugu-demo# date Fri Feb 10 05:14:49 UTC 2023 To change FuguIta's time zone to JST, enter the command as follows and change the file pointed by the symbolic link /etc/localtime. fugu-demo# cd /etc fugu-demo# ls -l localtime lrwxr-xr-x 1 root wheel 23 Feb 10 05:13 localtime -> /usr/share/zoneinfo/UTC fugu-demo# ln -s -f /usr/share/zoneinfo/Asia/Tokyo localtime fugu-demo# ls -l localtime lrwxr-xr-x 1 root wheel 30 Feb 10 14:15 localtime -> /usr/share/zoneinfo/Asia/Tokyo fugu-demo# date Fri Feb 10 14:15:44 JST 2023 fugu-demo# >''[Memo]''~ ''⇒''If the JST after setting is different from the actual time, use the [[date>man:date.1]] command to correct it. #aname(adduser) *** General user registration [#g69bab25] Immediately after starting FuguIta, you can only log in with the superuser (system administrator) account root. On a Unix-based OS, you normally log in as a general user and use the system on a daily basis. ~ When doing system administration, log back in as superuser to perform administrative tasks. >&color(red){''[Caution]''};~ &color(red){''!!''While logged in as the superuser, it is easy to perform operations that render the system inoperable. Of course, unintentional erroneous operation is no exception. To prevent such risks, it is ``strongly recommended'' that you create a general user account and use it normally. }; Below, create an account called yoshi as a general user. ~ Creating user accounts is also system management, so do it as root. Use the command [[adduser>man:adduser.8]] to add a user account. ~ First, you will be asked for default values ?k?kwhen adding a user account. This is only asked the first time adduser is run. Normally, there is no problem with inputting only the <Enter> key. # adduser Couldn't find /etc/adduser.conf: creating a new adduser configuration file Reading /etc/shells Enter your default shell: bash csh ksh nologin nsh sh [ksh]: Your default shell is: ksh -> /bin/ksh Default login class: authpf bgpd daemon default pbuild staff unbound [default]: Enter your default HOME partition: [/home]: Copy dotfiles from: /etc/skel no [/etc/skel]: Send welcome message?: /path/file default no [no]: Do not send message(s) Prompt for passwords by default (y/n) [y]: Default encryption method for passwords: auto blowfish [auto]: Use option ``-silent'' if you don't want to see all warnings and questions. Reading /etc/shells Check /etc/master.passwd Check /etc/group Next, enter the information for general user account creation. As an example, let's create a user account called "yoshi". ~ As shown at the beginning, the input can be corrected (retyped) at the end. Ok, let's go. Don't worry about mistakes. There will be a chance later to correct any input. Enter username []: yoshi Enter full name []: Yoshihiro Kawamata Enter shell bash csh ksh nologin nsh sh [ksh]: Uid [1000]: Login group yoshi [yoshi]: Login group is ``yoshi''. Invite yoshi into other groups: guest no [no]: wheel Login class authpf bgpd daemon default pbuild staff unbound [default]: Enter password []: Enter password again []: Name: yoshi Password: **** Fullname: Yoshihiro Kawamata Uid: 1000 Gid: 1000 (yoshi) Groups: yoshi wheel Login Class: default HOME: /home/yoshi Shell: /bin/ksh OK? (y/n) [y]: y Added user ``yoshi'' Copy files from /etc/skel to /home/yoshi Add another user? (y/n) [y]: n Goodbye! # >''[Memo]''~ ''⇒''In this example, the account yoshi is also added to the group called wheel. ~ Users with a wheel subscription can temporarily become root to perform system administration tasks. A general user account called yoshi is now created. ***Give administrator privileges to a general user [#y2b9442b] As explained in the previous section, to perform system administration tasks, you must temporarily become a superuser from a general user, or log out as a general user and then log back in as a superuser. On OpenBSD, general users can execute commands with root privileges using the command [[doas>man:doas]]. To use doas, you first need to edit the configuration file [[/etc/doas.conf>man:doas.conf]]. ~ doas.conf does not exist at first, so execute the following command to create the file (if doas.conf already exists, edit doas.conf with a text editor ). # echo permit persist :wheel > /etc/doas.conf # chmod 0600 /etc/doas.conf This will create a file doas.conf with a single line "permit persist :wheel". This is a setting that means "to allow users belonging to the wheel group to execute commands with root privileges". >''[Memo]''~ ''⇒''When you execute doas, you will be prompted for the password of the user who executed it, but since "persist" is specified in the above example, doas re-executing will bypass the user's password input. #aname(usbfadm_expand) ***Extend the storage area of the USB memory [#k9cd1e38] As explained in [[Creating a FuguIta LiveUSB>efg1:create_liveusb]], you can create a LiveUSB version of FuguIta by downloading the image file from the download site, expanding it, and writing it. However, this LiveUSB version of FuguIta can only use 2GB of space regardless of the size of the USB memory used. ~ Of this, the FuguIta system occupies about 1GB, so usbfadm can save about 1GB of data. The usbfadm utility that comes with FuguIta has a feature called expand that can expand the size of the partition that stores data. ~ Below is an example of using usbfadm expand. fugu-demo# usbfadm ← start usbfadm with root privileges Welcome to usbfadm. USB flash drive administration tool for FuguIta Version/Arch: 7.2/amd64 (FuguIta-7.2-amd64-202302081) Boot mode: manual Target device: not set Data saved as: not set readline capability available TAB to complete the reserved words Type ? for help. ? : ? ->target ← Specify the partition to extend with the target command Searching storage device Please make sure the device inserted. Then press ENTER -> sd0i sd0j sd0k sd1a +sd1d vnd5a ← list of detected partitions. target device ->sd1d Partitions with a + sign at the beginning are data storage partitions sd1d : ? ->info ← check the capacity of the specified partition Filesystem Size Used Avail Capacity iused ifree %iused Mounted on /dev/sd1d 1.1G 2.5K 1.1G 0% 5 1287065 0% /mnt ← 容量は1.1GB scanning... 512B 7.0/amd64/noasks sd1d : ? ->expand ← call expand function Select the expansion method for sd1d: 1: growfs - expands the partition while retaining its contents 2: newfs - expand and format the partition 3: [exit without expansion] ->2 ← extend partition using "newfs" There are two ways to extend a partition: "growfs" and "newfs". ~ growfs expands the area while retaining the data stored in the partition. ~ newfs reformats the partition after expanding the space. ~ Please note that newfs will erase all saved files and directories. On the other hand, even with growfs, it is recommended that you back up your data before running it. This makes sd1d as large as possible. Note that all contents in sd1d will be removed Do you proceed? [y/N] -> y /dev/rsd1d: 3136.5MB in 6423488 sectors of 512 bytes 257 cylinder groups of 12.24MB, 3134 blocks, 6272 inodes each super-block backups (for fsck -b #) at: 144, 25216, 50288, 75360, 100432, 125504, 150576, 175648, 200720, 225792, : 6368432, 6393504, 6418576, ** /dev/rsd1d ** File system is already clean ** Last Mounted on ** Phase 1 - Check Blocks and Sizes ** Phase 2 - Check Pathnames ** Phase 3 - Check Connectivity ** Phase 4 - Check Reference Counts ** Phase 5 - Check Cyl groups 1 files, 1 used, 5611214 free (14 frags, 701400 blocks, 0.0% fragmentation) sd1d : ? ->info ← check capacity after expansion Filesystem Size Used Avail Capacity iused ifree %iused Mounted on /dev/sd1d 2.7G 2.5K 2.7G 0% 5 1611897 0% /mnt ← 2.7GBに増加している scanning... 512B 7.0/amd64/noasks sd1d : ? ->quit Bye bye... fugu-demo# >''[Memo]'' ~ ''⇒''File system parameters (format type, block size, fragment size, inode density, etc.) are used as they are before expansion in growfs, while in newfs they are changed to the size after expansion. The matching parameters are set and formatting is performed. ***logout [#m60f45ba] Enter the exit command to terminate (logout) the account you are currently using. fugu-demo# exit OpenBSD/amd64 (fugu-demo.localnet) (tty00) login: **login as a general user [#p70c5caa] We created a general user account in the previous section, so try logging in with this account. OpenBSD/amd64 (fugu-demo.localnet) (tty00) login: yoshi Password: OpenBSD 7.2-stable (RDROOT.MP) #30: Wed Feb 8 13:07:26 JST 2023 Welcome to FuguIta, the OpenBSD-based live system. FuguIta aims to help popularize OpenBSD operating system by making it easier to get started with. For information on FuguIta's specific features and how to use them, please refer to the documentation on https://fuguita.org/. If you have any questions or suggestions for FuguIta, please send an email to me or post a message to fuguita.org's message board. Please feel free to contact me. Yoshihiro Kawamata kaw@on.rim.or.jp , https://fuguita.org/ fugu-demo$ pwd /ram/home/yoshi fugu-demo$ ls fugu-demo$ ls -a . .Xdefaults .cvsrc .mailrc .ssh .. .cshrc .login .profile fugu-demo$ >''[Memo]''~ ''⇒''When logged in as root, the shell prompt will be "fugu-demo#", but for general users it will be "fugu-demo$". ~ Follow this notation in the following examples. #aname(usbfadm_sync) *** Save file to USB memory [#vbd70334] FuguIta saves all data such as files created by the user, changed settings, added packages, system logs, etc. to the storage partition created in the LiveUSB version of FuguIta, and recalls it at the next startup. can do. Run the usbfadm command to save the data. Usbfadm requires administrator privileges to run, so use the doas command to run usbfadm. fugu-demo$ doas usbfadm doas (yoshi@fugu-demo.localnet) password: Welcome to usbfadm. USB flash drive administration tool for FuguIta Version/Arch: 7.2/amd64 (FuguIta-7.2-amd64-202302081) Boot mode: manual Target device: /dev/sd0d Data saved as: fugu-demo readline capability available TAB to complete the reserved words Type ? for help. ? : ? -> First, specify the destination partition using the target command. ~ After confirming that the storage device is installed, press ENTER to scan the device. ~ Devices with a + sign in front of the device name are devices that can be used for saving. ? : ? --> target Searching USB flash drives Please make sure the device inserted. Then press ENTER -> cd0a sd0a +sd0d targe device--> sd0d Then name the data you want to save using the saveas command. ~ If the name is omitted, the host name will be used as the save sd0d : ? --> saveas Name of saved data --> fugu-demo Your data will be saved as ``fugu-demo''. Notice that the prompt string, which was originally "? : ?", has changed. The values ?k?kset by the target command and saveas just now are displayed in the prompt so that you can check them. Finally run the sync command to actually save the data. /dev/sd0d : fugu-demo -> sync Sync current mfs as fugu-demo, OK? -> y building file list ... done created directory /mnt/livecd-config/fugu-demo ./ etc/ etc/bgpd.conf etc/boot.conf : : var/yp/Makefile.yp var/yp/Makefile.yp.dist var/yp/README sent 16455591 bytes received 232568 bytes 180412.53 bytes/sec total size is 15492096 speedup is 0.93 Let's display the information of the data saved with the info command. /dev/sd0d : fugu-demo -> info Filesystem Size Used Avail Capacity Mounted on /dev/sd0d 218M 18.9M 179M 9.6% /mnt scanning... 18.9M 6.0/amd64/fugu-demo The data seems to be saved without problems, so exit usbfadm. /dev/sd0d : fugu-demo -> bye fugu-demo$ >''[Memo]''~ Saving with usbfadm can also be done from the shell command line. fugu-demo$ doas usbfadm -r doas (yoshi@fugu-demo.localnet) password: ======================================== = Sync current mfs as fugu-demo into /dev/sd0d = sending incremental file list deleting etc/X11/xenodm/authdir/authfiles/A:0-G4H73h : var/spool/smtpd/purge/ var/spool/smtpd/temporary/ # Option -r tells usbfadm to re-save the file. ~ ~ You can also use cron to run periodically in the background. # crontab -l #minute hour mday month wday command --- omit --- #save session periodically #0 */4 * * * PATH=$PATH:/usr/local/bin /usr/fuguita/sbin/usbfadm -rq This causes usbfadm saves to happen in the background every 4 hours. -q is a "quiet" option that does not show progress etc. >''[Memo]''~ ''⇒''You can use any partition that is formatted in the OpenBSD FFS format and has a directory named /livecd-config, even if it is not created with the usbfadm command. ***Exit Fuguita [#o83b9962] To terminate FuguIta operation, log in as root and execute the [[shutdown>man:shutdown.8]] command. ~ Or as a normal user, execute the shutdown command using the doas. fugu-demo$ doas shutdown -h -p now doas (yoshi@fugu-demo.localnet) password: Shutdown NOW! shutdown: [pid 4771] fugu-demo$ *** FINAL System shutdown message from root@fugu-demo.localnet *** System going down IMMEDIATELY System shutdown time has arrived fugu-demo$ syncing disks... done In the above example, the -h option is specified as a specification to the shutdown command, so the system is halted. In addition, since the -p option is specified at the same time, the power will be automatically turned off immediately after stopping (some PC models do not support turning off the power with the -p option. In this case, to turn off the unit). ~ If you specify the -r option instead of the -h or -p options, the system will reboot. ~ In Fuguita, user-created data and system configuration files are held in memory. It will disappear. The fact that the operations performed on Fuguita disappear when the system is stopped means that from a different point of view, it is less likely to affect existing systems installed on the internal hard disk. ~ In other words, deleting files, stopping processes, etc. as root has limited impact, so you can practice system administration with confidence. #aname(boot_mode3) ** Read saved settings and files [#cee39c36] The data saved by the method described in [[Save settings and files>#usbfadm_sync]] can be read at subsequent startups to restore the environment. ~ To restore the data, select mode 3 in the boot mode selection. Boot modes: 0: fresh boot - standard mode as a live system 1: fresh boot - less memory, faster boot (/usr is non-writable, can't pkg_add) 2: fresh boot - works using only RAM (about 1GB or more of RAM required) 3: boot with retrieving saved files from storage device or enter passphrase for an encrypted volume 4: boot with retrieving saved files from floppy disk 5: interactive shell for debugging ->3 scanning partitions: sd0a sd0d sd0i cd0a Device(s) found: loadable from: sd0d Which is FuguIta's storage device? [default: sd0d] -> sd0d /dev/sd0d : available data; fugu-demo config name -> fugu-demo Copying files from flash to ram ... If you specify the saved data name, the saved data will be restored and the startup will be restarted. ~ Since all setting values are restored, network settings are not asked, unlike boot mode 0 explained at the beginning. After logging in, you can also save more data. The procedure is the same as described in [[Save settings and files>#usbfadm_sync]], but Since files are already saved on LiveUSB, only changed files and directories are targeted. ~ And since the save device name and save name have already been set, it is OK to execute the sync command immediately. When shutting down, data is not saved automatically by default, so you need to manually execute the usbfadm command each time. If you want to automate this, please set [[Save data automatically when exiting>efg3:autosave]]. ///***X Window Systemを起動してみる。 [#x82da9c0] ///OpenBSDはX Window Systemというグラフィクス環境を含んだ形で出荷されており、FuguItaもこのX Window Systemを使用することができます。 ///>''【メモ】''~ ///''⇒''X Window Systemは「X」や「X11」などと略して呼んでもよいことになっています。以下、X Window SystemをXと表記することにします。 /// ///Xを使用するには、準備編の[[ログイン方法の選択>efg1:loginmethod]] で説明したように、ログイン方法としてX Window Systemを選択します。 /// Do you login with Console or X Window System? /// [default: Console] -> x ///Xが起動すると、以下のようなログイン画面が表示されますので、ユーザ名とパスワードを入力します。 ///#ref(FuguItaガイド/xenodm-login.png,,50%) ///ログインに成功すると以下のような画面になります。 ///#ref(FuguItaガイド/startx.png) ///画面左上の白いウィンドウは「端末エミュレータ」というもので、X上でシェルとのセッションなど、文字端末での作業を行うためのプログラムです。~ ///右上には時計が表示されています。~ ///左下にあるものは「xconsole」といい、システムのログ情報を表示するプログラムです。起動直後はこのプログラムはアイコン化されています。~ ///右下の表のようなものは、「仮想デスクトップ」といい、複数のデスクトップ画面を切り替えて使用できるようにするものです。標準の設定では3列×3行=9面のデスクトップ画面を切り替えられます。 /// ///壁紙部分(Xでは、「ルートウィンドウ」と呼びます)でマウスの左ボタンを押すとメニューが表われます。このメニューからXのアプリを選択して実行できます。メニューにないものは端末エミュレータからコマンドを投入して実行することもできます。 /// ///以下の画面は、実際にアプリを実行してみた例です。 ///#ref(FuguItaガイド/various-xclt.png,wrap) ///ルートウィンドウではマウスの中ボタンや右ボタンを押すことで、別のメニューが表示されます。 ///>''【メモ】''~ ///''⇒''Xの操作は3ボタンマウスによる操作を想定して設計されています。 ///中ボタンのないマウスの場合は、左右のボタンを両方同時に押すか、あるいはホイールを押します。 /// ///Xを終了するには、マウスの左ボタンのメニュー中、「Exit」を選択し、さらに本当に終了するかを確認するウィンドウに対し「Exit」を選択します。 ///#ref(FuguItaガイド/quit-verify-win.png,wrap) /// ///>''【メモ】''~ ///''⇒''OpenBSDには、X Windowを使うためのソフトウェア(デスクトップ環境)が何種類か用意されており、また、日本語の表示や入力用のソフトウェアを追加することもできます。これについては応用編の [[日本語デスクトップ環境を導入する>efg3:dtjsetup]] で説明致します。 /// ///*使用法の習得 [#r70ef50e] ///#aname(useunix) ///** Unix系OSの使い方を調べる [#h19a6ead] ///本ガイドの冒頭で説明したように、FuguItaはUnix系OSの一種である OpenBSD をベースにして作成されています。 /// ///Unixは約半世紀前の1969年に開発され、以降さまざまなコンピュータ向けの実装が作成されてきました。今ではUnix系のOSはスーパーコンピュータからスマートフォンや家電製品、あるいは小さな組込み機器までさまざまな環境で使用されるに至っています。 /// ///Unix系OSはMicrosoft WindowsなどのOSとは操作方法が大きくことなっており、最初はどのように使ってよいか見当がつかない方もいるかも知れません。 /// ///Unix系OSの基本的な部分はコンシューマユーザ向けに作られてはいません。OpenBSDも例外ではなく、予備知識を持たないユーザを想定した親切なユーザインターフェースなどは初期状態ではほとんど用意されていません。言い替えると''「なんとなくあちこちいじっているうちに使い方がわかった」ということにはなりません。'' /// ///そんなUnix系OSを理解し、活用するにはどのようなアプローチを取ればよいのでしょうか。 /// ///***書籍の用意 [#u17669c8] ///>Unix系OSに関する基本を解説している書籍を用意しましょう。~ ///様々な実装が存在するUnix系OSですが、それらには [[Unix哲学>https://ja.wikipedia.org/wiki/UNIX%E5%93%B2%E5%AD%A6]] とも呼ばれる共通した考え方があります。この考え方を理解し、実践できるようになることがUnix系OSを習得する上でのキーになります。~ ///書籍の内容としては特定の実装だけを対象とせず、基本的な概念から応用の入口までを網羅的・体系的に解説しているものがよいでしょう。~ ///>「これ一冊読めばすべてOK」というような書籍はなかなかないのですが、定評のあるものをいくつか挙げておきます; ///-はじめてUNIXで仕事をする人が読む本 / 木本雅彦 他 著 / KADOKAWA アスキーメディアワークス ///-新 The Unix Super Text [上] / 山口和紀・古瀬一隆 著 / 技術評論社 /// ///>以下のものは副読本として読むと、より理解が進むかもしれません; ///-Unixという考え方-その設計思想と哲学 / Mike Gancarz著 芳尾桂訳 / オーム社 ///-Linuxを「読む」 / こじまみつひろ著 / 毎日コミュニケーションズ /// ///#aname(man) ///***オンラインマニュアルを活用する [#w1893733] ///>やはり自分で手を動かすことが、効果的なスキル習得の基本になります。~ ///その際、やみくもにやってみるのではなく、システムに内蔵されているオンラインマニュアル(manコマンド)を活用しましょう。オンラインマニュアルは記述が、違う実装に基いて説明している、というような弱点はありません。 ///>>''【メモ】''~ ///''⇒''Unixのオンラインマニュアルは幾つかの章に別れています。~ ///同じ名前の項目が複数の章にある場合があります。例えば「sleep」は、1章(一般コマンド)と3章(ライブラリ)の両方にあり、それぞれsleep(1)、sleep(3)の様に記述します。ですので、sleepコマンドのコマンドラインを知りたい場合は、 /// $ man 1 sleep ///C言語でプログラミングをしていて、sleep関数の使い方を知りたい場合は、 /// $ man 3 sleep ///として第3章にあるsleep関数の説明を表示します。 /// ///ですので、これ以降「ls(1)」のような表記が出てきますが、これは「"man 1 ls"を実行してオンラインマニュアルの1章にある"ls"の項を参照して下さい」という意味になります。 ///>''【メモ】''~ ///''⇒''オンラインマニュアルのことをマニュアルページと呼ぶこともあります。意味は同じです。 /// ///オンラインマニュアルとは別に、Unixのコマンドの多くは自分自身の使用説明を表示する機能を持っています; /// $ man /// usage: man [-acfhklw] [-C file] [-I os=name] [-K encoding] [-M path] [-m path] /// [-O option=value] [-S subsection] [-s section] [-T output] [-W level] /// [section] name ... /// $ cp -? /// cp: unknown option -- ? /// usage: cp [-fip] [-R [-H | -L | -P]] source target /// cp [-fip] [-R [-H | -L | -P]] source ... directory ///上の例ではmanコマンドとcpコマンドのヘルプメッセージを表示させています。~ ///このようにコマンドのヘルプメッセージは非常に簡素な説明なので、忘れてしまったコマンドラインオプションを思い出すため、といったような備忘録的な役割で使用されます。 /// ///***「参考情報」としてネットを活用 ///>インターネットを活用するとUnix系OSに関連する情報も、簡単に得ることができます。 ~ ///しかし、前項で説明したような弱点もあります。特に検索エンジンでの検索結果については目の前の実機にもあてはまるかどうかは自分で判断する必要があります。検索サイトの結果は「参考情報」として活用するのがよいでしょう。~ ///さらに、現在では多くのUnix系OSが開発コミュニティなどによる「公式サイト」を持っています。公式サイトの情報は一次情報として活用できます。~ /// ///***まとめ [#m2783069] ///以上述べたことを例えば「ファイルの属性」というトピックにあてはめて考えると、次のようになるでしょう; /// ///-書籍で基礎事項を押さえる ~ ///→ファイルのオーナ・グループ・パーミッションとは何か、どのようなコマンドで操作するかを調べる。 /// ///-オンラインマニュアル等で確認しながら実際に操作 ~ ///→実際にchown, chgrp, chmodコマンドなどを実行し、結果を確認してみる。どのようなコマンドラインオプションがあるかなどをmanコマンドで調べる。 /// ///-ネットで関連情報・参考情報をゲット~ ///→ネットの検索などで注意点、はまりやすい点、色々な応用法などを調べてみる。~ ///→公式サイトで関連情報を調べる ... 仕様の変更やセキュリティホール情報がないか、など。 /// ///FuguItaは以上で述べたようなUnix系OSの習得にも向いています。つまり、インストール作業不要というライブシステムの特徴を活かし、ユーザが気軽に色々と試せる環境、失敗しても容易にやりなおせる環境を提供しています。 /// ///#aname(useopenbsd) ///**OpenBSDの使い方を調べる [#g576b58f] ///前節の [[Unix の使い方を調べる>#useunix]] ではUnix系OSの使用経験のあまりない人がUnix系OSの使い方を習得するためのヒントについて説明しましたが、この節ではOpenBSDを使う場合の情報源やそれらを活用する上でのポイントについて説明します。 /// ///***導入 ///rootでログインすると、OpenBSDプロジェクト開発リーダーTheo de Raadt氏からのメールが届いています。 /// # mail /// Mail version 8.1.2 01/15/2001. Type ? for help. /// "/var/mail/root": 1 message 1 new /// >N 1 deraadt@do-not-re Sun Oct 18 07:58 86/4565 Welcome to OpenBSD 5.8! /// & more 1 /// Message 1: /// From deraadt@do-not-reply.openbsd.org Sun Oct 18 07:58:58 MST 2015 /// Date: Oct 18 07:58:58 MST 2015 /// From: deraadt@do-not-reply.openbsd.org (Theo de Raadt) /// To: root /// Subject: Welcome to OpenBSD 5.8! /// /// This message attempts to describe the most basic initial questions that a /// system administrator of an OpenBSD box might have. You are urged to save /// this message for later reference. /// ....(以下略).... ///このメールでは、OpenBSDをインストールした人が最初に持つと思われる疑問について説明しています。メール本文に書いてある情報源をたどってゆくことで、OpenBSDを使用する上での様々なノウハウを得ることができます。 /// ///以下このメールの内容と重複する部分もありますが、システム上の各種情報源について触れていきます。 /// ///***システム内のドキュメント ///[[Unixの使い方を調べる>#useunix]] で述べたようにオンラインマニュアルはUnix系OSの最も基本的な情報源ですが、OpenBSDにおいても例外ではありません。~ ///そのことはインストール直後のroot宛てメールにおいても、以下のように強調されています; /// Again, PLEASE READ THE MANUAL PAGES. Our developers have spent countless /// hours improving them so that they are clear and precise. ///マニュアルページには、特に導入のためのエントリも幾つか用意されています。 ///:[[help>man:help.1]]|Unix初心者向けのエントリです。コマンドラインで''help''コマンドを実行した場合もこのエントリが表示されます。 ///:[[man>man:man.1]]|manコマンドの説明です。OpenBSDではmandocというプログラムによってマニュアルページのシステムが再実装されていますが、manコマンドの使い方は他のUnix系OSとほぼ同じです。 ///:[[afterboot>man:afterboot.8]]|インストール直後にチェックを行ったほうがよい項目について解説しています。この文書の [[入門編>efg2:pagetop]] より詳しく網羅的な内容ですので、ご一読をお勧めします。 ///:intro|マニュアルページはカテゴリごとに章に別れていますが、その各章に関する説明です。例えば、 /// man 1 intro ///とすると、一般コマンドカテゴリについての説明が、 /// man 5 intro ///では、ファイル形式のカテゴリ全般についての説明が表示されます。 /// ///OpenBSDでは、マニュアルページの章立ては以下のようになっています; ///|1 |一般コマンド | ///|2 |システムコールとエラー番号 | ///|3 |ライブラリ | ///|4 |デバイスドライバ | ///|5 |ファイル形式 | ///|6 |ゲーム | ///|7 |その他 | ///|8 |システム保守・運用のためのコマンド | ///|9 |カーネル | /// ///各セクションのマニュアルの内容は現状のシステムに追従し続けており、常にアップデートと推敲が行われています。~ ///また他のUnix系OSでは4章(デバイスドライバ)などの章で、ほとんど情報が提供されていない実装系もありますが、OpenBSDではこのような情報も完備されており、例えばWi-Fiの設定のように使用するハードウェアに依存した設定情報が必要な場合も十分な情報を得ることができます。 ///>''【メモ】''~ ///''⇒''OpenBSDに内蔵されているオンラインマニュアルはmanコマンドで読めますが、ウェブブラウザで man.openbsd.org にアクセスして読むこともできます。~ ///FuguItaガイド内でもコマンドの説明中 [[ls(1)>man:ls.1]] のようにリンクを張ってある部分はウェブのオンラインマニュアルを参照できます。 /// //////|TO BE REVISED| ///#ref(FuguItaガイド/emacsinfo.png,around,right) ///GNUプロジェクト由来のコマンドやEmacs上で動作するアプリケーションに関しては、Info形式のドキュメントが提供されている場合があります。~ ///Infoドキュメントを閲覧するには、[[info>man:info.1]]コマンドを実行します。 ///>''【メモ】''~ ///''⇒''Emacsエディタを追加インストールしている環境では、InfoドキュメントはEmacsエディタから、''<Meta>-x info<Enter>''、あるいは''<Escape> x info<Enter>''と入力し、閲覧することができます。 ///#clear /// ///マニュアルページやInfo以外にもアプリケーション固有のドキュメントがあります。 ///それらは主に次に挙げるディレクトリの下にあります; ///-/usr/share/doc ///-/usr/X11R6/share/doc ///-/usr/local/share/doc ///-/usr/local/share/gtk-doc /// ///***システム上のファイル [#sd8aa942] ///サーバやアプリケーションソフトなどの設定ファイルはすべて/etc以下に集約されています。~ ///パッケージ管理ツールports/packagesで追加されたソフトウェアは、/usr/local以下にインストールされますが、設定ファイルに関しては/etc以下に配置されます。X関連の設定ファイルについても同様です。 /// ///システムの動作ログは、/var/log以下にあります。唯一、cronのみが/var/cron/logというログファイルを作成します。 /// ///[[起動時の設定>efg1:bootsetup]] で説明した起動時に表示されるカーネルメッセージは、/var/run/dmesg.boot というファイルに記録されています。システム起動完了後はこのファイルの内容を閲覧することで、システム起動時の様子を調査することができます。 /// ///***インターネット上の情報 ///:http://www.openbsd.org/|プロジェクトによって運営されている公式サイト。[[OpenBSD全般に関する詳細なガイド>http://www.openbsd.org/faq/index.html]] や [[システムの更新情報>http://www.openbsd.org/errata72.html]] など、ウェブ上のOpenBSD関連情報の起点です。 ///:http://undeadly.org/ 「OpenBSD Journal」|OpenBSD関連のニュースサイト。その都度OpenBSDの旬の話題が取り上げられ、OpenBSD開発の最前線の様子なども知ることができます。以前、[[FuguItaの紹介記事>http://undeadly.org/cgi?action=article&sid=20131210093950]] も投稿されました。 ///:メーリングリスト|[[公式に管理・運営されているメーリングリスト>http://www.openbsd.org/mail.html]] があります。また、これらのアーカイブサイトもあり、メーリングリストに加入しなくてもウェブ上での閲覧が可能です。 /// ///***書籍 [#y291b608] ///作者の知る限り、OpenBSDユーザ向けに書かれた日本語の書籍は2023年現在出版されておりません。~ ///BSD系のUnix向けの書籍の中には、 ///-BSD HACKS ~ プロが使うテクニック&ツール100選 / Dru Lavigne著,桃井康成監修,林秀幸訳 / オライリー・ジャパン /// ///など、部分的にOpenBSDについて言及されている書籍もあります。 /// ///英語の書籍に関しては [[公式サイトの記述>http://www.openbsd.org/books.html]] をご参照下さい。~ ///'''Absolute OpenBSD, 2nd Edition''' や '''The book of PF, 3rd Edition'''など、OpenBSD向けの書籍がいくつか出版されているようです。 #navi(FuguItaGuide)