- The added line is THIS COLOR.
- The deleted line is THIS COLOR.
#author("2023-02-15T23:48:23+09:00","default:kaw","kaw")
#author("2023-02-16T11:36:33+09:00","default:kaw","kaw")
#navi(FuguItaGuide)
This chapter describes the basic procedure when the system is booted and ready for use.
We will also point out sources of information that may be helpful for those unfamiliar with Unix-like operating systems, and for those with experience using other Unix-like operating systems.
#contents
#aname(firstlogin)
* Login for the first time [#cb54daf8]
**Log in as root [#j9dcb23b]
Once FuguIta has finished booting, you will be presented with the OpenBSD operating system login screen. ~
At first, only the superuser account can log in, so enter ``root'' at the ``login:'' prompt, and enter the password you set at startup at the ``Password:'' prompt.
OpenBSD/amd64 (fugu-demo.localnet) (tty00)
login: root
Password:
OpenBSD 7.2-stable (RDROOT.MP) #28: Fri Feb 3 11:29:19 JST 2023
Welcome to FuguIta, the OpenBSD-based live system.
FuguIta aims to help popularize OpenBSD operating system by making it easier
to get started with.
For information on FuguIta's specific features and how to use them, please
refer to the documentation on https://fuguita.org/.
If you have any questions or suggestions for FuguIta, please send an email to
me or post a message to fuguita.org's message board.
Please feel free to contact me.
Yoshihiro Kawamata
kaw@on.rim.or.jp , https://fuguita.org/
You have new mail.
fugu-demo#
If the login is successful, the shell prompt "fugu-demo#" will be displayed and commands can be executed. ~
As an example, let's run the command ps.
fugu-demo# ps -aux
USER PID %CPU %MEM VSZ RSS TT STAT STARTED TIME COMMAND
root 68528 3.6 0.1 868 884 00 Sp 6:51AM 0:01.89 -ksh (ksh)
root 1 0.0 0.1 884 532 ?? I 6:40AM 0:01.68 /sbin/init
root 14453 0.0 0.1 792 644 ?? Ip 6:43AM 0:00.47 /sbin/slaacd
_slaacd 53995 0.0 0.1 812 784 ?? Ip 6:43AM 0:00.81 slaacd: engi
_slaacd 33982 0.0 0.1 800 732 ?? Ip 6:43AM 0:00.81 slaacd: fron
root 55401 0.0 0.1 712 548 ?? IU 6:44AM 0:00.17 dhclient: em
_dhcp 78950 0.0 0.1 840 700 ?? Ip 6:44AM 0:00.10 dhclient: em
root 86344 0.0 0.2 520 2184 ?? IpU 6:46AM 0:00.64 syslogd: [pr
_syslogd 45328 0.0 0.1 1128 1488 ?? Sp 6:46AM 0:01.04 /usr/sbin/sy
root 73380 0.0 0.1 836 584 ?? IU 6:46AM 0:00.27 pflogd: [pri
_pflogd 53476 0.0 0.1 876 540 ?? Sp 6:46AM 0:02.97 pflogd: [run
_ntp 63935 0.0 0.3 1016 2868 ?? S<p 6:47AM 0:02.87 ntpd: ntp en
_ntp 18769 0.0 0.2 820 2508 ?? Ip 6:47AM 0:01.86 ntpd: dns en
root 34145 0.0 0.2 788 1568 ?? S<pU 6:47AM 0:00.81 /usr/sbin/nt
root 63360 0.0 0.1 1324 1280 ?? I 6:47AM 0:00.37 sshd: /usr/s
root 61566 0.0 0.2 1680 2052 ?? Ip 6:48AM 0:00.82 /usr/sbin/sm
_smtpd 19845 0.0 0.4 1448 3940 ?? Ip 6:48AM 0:01.83 smtpd: klond
_smtpd 66321 0.0 0.4 1716 4240 ?? Ip 6:48AM 0:02.23 smtpd: contr
_smtpd 91561 0.0 0.4 1552 4164 ?? Ip 6:48AM 0:01.95 smtpd: looku
_smtpd 90688 0.0 0.4 1844 4396 ?? Ip 6:48AM 0:02.69 smtpd: pony
_smtpq 16446 0.0 0.4 1640 4252 ?? Ip 6:48AM 0:02.47 smtpd: queue
_smtpd 82450 0.0 0.4 1440 3988 ?? Ip 6:48AM 0:02.17 smtpd: sched
_sndio 66682 0.0 0.1 516 744 ?? I<p 6:48AM 0:00.17 /usr/bin/snd
_sndiop 92235 0.0 0.1 504 920 ?? IpU 6:48AM 0:00.08 sndiod: help
root 1376 0.0 0.1 672 1268 ?? Sp 6:51AM 0:00.84 /usr/sbin/cr
root 6575 0.0 0.0 484 360 00 R+pU/0 7:32AM 0:00.35 ps -aux
root 13541 0.0 0.1 288 1296 C0 I+pU 6:51AM 0:00.58 /usr/libexec
root 70324 0.0 0.1 292 1308 C1 I+pU 6:51AM 0:00.54 /usr/libexec
root 10475 0.0 0.1 296 1312 C2 I+pU 6:51AM 0:00.44 /usr/libexec
root 81779 0.0 0.1 292 1304 C3 I+pU 6:51AM 0:00.58 /usr/libexec
root 45364 0.0 0.1 284 1280 C5 I+pU 6:51AM 0:00.47 /usr/libexec
fugu-demo#
ps is a command that displays what programs (processes) are currently running. ~
Even if the system is just starting up and it looks like there is no movement on the screen, you can see that many processes have already been started internally.
From now on, I will explain the settings that should be done when you log in as root for the first time.
*** Change time zone [#j329c68f]
FuguIta immediately after booting in mode 0 has the time zone (time zone) set to UTC (Universal Coordinated Time). ~
Japan Standard Time (JST) is 9 hours ahead of Coordinated Universal Time.
fugu-demo# date
Fri Feb 10 05:14:49 UTC 2023
To change FuguIta's time zone to JST, enter the command as follows and change the file pointed by the symbolic link /etc/localtime.
fugu-demo# cd /etc
fugu-demo# ls -l localtime
lrwxr-xr-x 1 root wheel 23 Feb 10 05:13 localtime -> /usr/share/zoneinfo/UTC
fugu-demo# ln -s -f /usr/share/zoneinfo/Asia/Tokyo localtime
fugu-demo# ls -l localtime
lrwxr-xr-x 1 root wheel 30 Feb 10 14:15 localtime -> /usr/share/zoneinfo/Asia/Tokyo
fugu-demo# date
Fri Feb 10 14:15:44 JST 2023
fugu-demo#
>''[Memo]''~
''⇒''If the JST after setting is different from the actual time, use the [[date>man:date.1]] command to correct it.
#aname(adduser)
*** General user registration [#g69bab25]
Immediately after starting FuguIta, you can only log in with the superuser (system administrator) account root.
On a Unix-based OS, you normally log in as a general user and use the system on a daily basis. ~
When doing system administration, log back in as superuser to perform administrative tasks.
>&color(red){''[Caution]''};~
&color(red){''!!''While logged in as the superuser, it is easy to perform operations that render the system inoperable. Of course, unintentional erroneous operation is no exception. To prevent such risks, it is ``strongly recommended'' that you create a general user account and use it normally. };
Below, create an account called yoshi as a general user. ~
Creating user accounts is also system management, so do it as root.
Use the command [[adduser>man:adduser.8]] to add a user account. ~
First, you will be asked for default values when adding a user account. This is only asked the first time adduser is run. Normally, there is no problem with inputting only the <Enter> key.
First, you will be asked for default values ?k?kwhen adding a user account. This is only asked the first time adduser is run. Normally, there is no problem with inputting only the <Enter> key.
# adduser
Couldn't find /etc/adduser.conf: creating a new adduser configuration file
Reading /etc/shells
Enter your default shell: bash csh ksh nologin nsh sh [ksh]:
Your default shell is: ksh -> /bin/ksh
Default login class: authpf bgpd daemon default pbuild staff unbound
[default]:
Enter your default HOME partition: [/home]:
Copy dotfiles from: /etc/skel no [/etc/skel]:
Send welcome message?: /path/file default no [no]:
Do not send message(s)
Prompt for passwords by default (y/n) [y]:
Default encryption method for passwords: auto blowfish [auto]:
Use option ``-silent'' if you don't want to see all warnings and questions.
Reading /etc/shells
Check /etc/master.passwd
Check /etc/group
///次に、一般ユーザのアカウント作成の報を入力します。例として「yoshi」というユーザアカウントを作成してみます。~
///最初に表示されているように、力内容は最後に訂正でき(入力しなおせ)ます。
Next, enter the information for general user account creation. As an example, let's create a user account called "yoshi". ~
As shown at the beginning, the input can be corrected (retyped) at the end.
Ok, let's go.
Don't worry about mistakes. There will be a chance later to correct any input.
Enter username []: yoshi
Enter full name []: Yoshihiro Kawamata
Enter shell bash csh ksh nologin nsh sh [ksh]:
Uid [1000]:
Login group yoshi [yoshi]:
Login group is ``yoshi''. Invite yoshi into other groups: guest no
[no]: wheel
Login class authpf bgpd daemon default pbuild staff unbound
[default]:
Enter password []:
Enter password again []:
Name: yoshi
Password: ****
Fullname: Yoshihiro Kawamata
Uid: 1000
Gid: 1000 (yoshi)
Groups: yoshi wheel
Login Class: default
HOME: /home/yoshi
Shell: /bin/ksh
OK? (y/n) [y]: y
Added user ``yoshi''
Copy files from /etc/skel to /home/yoshi
Add another user? (y/n) [y]: n
Goodbye!
#
>''[Memo]''~
''⇒''In this example, the account yoshi is also added to the group called wheel. ~
Users with a wheel subscription can temporarily become root to perform system administration tasks.
A general user account called yoshi is now created.
***Give administrator privileges to a general user [#y2b9442b]
As explained in the previous section, to perform system administration tasks, you must temporarily become a superuser from a general user, or log out as a general user and then log back in as a superuser.
On OpenBSD, general users can execute commands with root privileges using the command [[doas>man:doas]].
To use doas, you first need to edit the configuration file [[/etc/doas.conf>man:doas.conf]]. ~
doas.conf does not exist at first, so execute the following command to create the file (if doas.conf already exists, edit doas.conf with a text editor ).
# echo permit persist :wheel > /etc/doas.conf
# chmod 0600 /etc/doas.conf
This will create a file doas.conf with a single line "permit persist :wheel". This is a setting that means "to allow users belonging to the wheel group to execute commands with root privileges".
>''[Memo]''~
''⇒''When you execute doas, you will be prompted for the password of the user who executed it, but since "persist" is specified in the above example, doas re-executing will bypass the user's password input.
///#aname(usbfadm_expand)
///***USBメモリの保存領域を拡張する [#k9cd1e38]
///[[FuguItaのLiveUSBを作る>fg1:create_liveusb]] で説明したように、ダウンロードサイトからイメージファイルをダウンロードし、展開、書込みを行うことでLiveUSB版FuguItaを作成することができます。
#aname(usbfadm_expand)
***Extend the storage area of the USB memory [#k9cd1e38]
As explained in [[Creating a FuguIta LiveUSB>fg1:create_liveusb]], you can create a LiveUSB version of FuguIta by downloading the image file from the download site, expanding it, and writing it.
However, this LiveUSB version of FuguIta can only use 2GB of space regardless of the size of the USB memory used. ~
Of this, the FuguIta system occupies about 1GB, so usbfadm can save about 1GB of data.
The usbfadm utility that comes with FuguIta has a feature called expand that can expand the size of the partition that stores data. ~
Below is an example of using usbfadm expand.
fugu-demo# usbfadm ← start usbfadm with root privileges
Welcome to usbfadm.
USB flash drive administration tool for FuguIta
Version/Arch: 7.2/amd64 (FuguIta-7.2-amd64-202302081)
Boot mode: manual
Target device: not set
Data saved as: not set
readline capability available
TAB to complete the reserved words
Type ? for help.
? : ? ->target ← Specify the partition to extend with the target command
Searching storage device
Please make sure the device inserted.
Then press ENTER ->
sd0i sd0j sd0k sd1a +sd1d vnd5a ← list of detected partitions.
target device ->sd1d Partitions with a + sign at the beginning
are data storage partitions
sd1d : ? ->info ← check the capacity of the specified partition
Filesystem Size Used Avail Capacity iused ifree %iused Mounted on
/dev/sd1d 1.1G 2.5K 1.1G 0% 5 1287065 0% /mnt ← 容量は1.1GB
scanning...
512B 7.0/amd64/noasks
sd1d : ? ->expand ← call expand function
Select the expansion method for sd1d:
1: growfs - expands the partition while retaining its contents
2: newfs - expand and format the partition
3: [exit without expansion]
->2 ← extend partition using "newfs"
There are two ways to extend a partition: "growfs" and "newfs". ~
growfs expands the area while retaining the data stored in the partition. ~
newfs reformats the partition after expanding the space. ~
Please note that newfs will erase all saved files and directories. On the other hand, even with growfs,
it is recommended that you back up your data before running it.
This makes sd1d as large as possible.
Note that all contents in sd1d will be removed
Do you proceed? [y/N] -> y
/dev/rsd1d: 3136.5MB in 6423488 sectors of 512 bytes
257 cylinder groups of 12.24MB, 3134 blocks, 6272 inodes each
super-block backups (for fsck -b #) at:
144, 25216, 50288, 75360, 100432, 125504, 150576, 175648, 200720, 225792,
:
6368432, 6393504, 6418576,
** /dev/rsd1d
** File system is already clean
** Last Mounted on
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
1 files, 1 used, 5611214 free (14 frags, 701400 blocks, 0.0% fragmentation)
sd1d : ? ->info ← check capacity after expansion
Filesystem Size Used Avail Capacity iused ifree %iused Mounted on
/dev/sd1d 2.7G 2.5K 2.7G 0% 5 1611897 0% /mnt ← 2.7GBに増加している
scanning...
512B 7.0/amd64/noasks
sd1d : ? ->quit
Bye bye...
fugu-demo#
>''[Memo]'' ~
''⇒''File system parameters (format type, block size, fragment size, inode density, etc.) are used as they are before expansion in growfs, while in newfs they are changed to the size after expansion. The matching parameters are set and formatting is performed.
***logout [#m60f45ba]
Enter the exit command to terminate (logout) the account you are currently using.
fugu-demo# exit
OpenBSD/amd64 (fugu-demo.localnet) (tty00)
login:
**login as a general user [#p70c5caa]
We created a general user account in the previous section, so try logging in with this account.
OpenBSD/amd64 (fugu-demo.localnet) (tty00)
login: yoshi
Password:
OpenBSD 7.2-stable (RDROOT.MP) #30: Wed Feb 8 13:07:26 JST 2023
Welcome to FuguIta, the OpenBSD-based live system.
FuguIta aims to help popularize OpenBSD operating system by making it easier
to get started with.
For information on FuguIta's specific features and how to use them, please
refer to the documentation on https://fuguita.org/.
If you have any questions or suggestions for FuguIta, please send an email to
me or post a message to fuguita.org's message board.
Please feel free to contact me.
Yoshihiro Kawamata
kaw@on.rim.or.jp , https://fuguita.org/
fugu-demo$ pwd
/ram/home/yoshi
fugu-demo$ ls
fugu-demo$ ls -a
. .Xdefaults .cvsrc .mailrc .ssh
.. .cshrc .login .profile
fugu-demo$
>''[Memo]''~
''⇒''When logged in as root, the shell prompt will be "fugu-demo#", but for general users it will be "fugu-demo$". ~
Follow this notation in the following examples.
#aname(usbfadm_sync)
*** Save file to USB memory [#vbd70334]
FuguIta saves all data such as files created by the user, changed settings, added packages, system logs, etc. to the storage partition created in the LiveUSB version of FuguIta, and recalls it at the next startup. can do.
Run the usbfadm command to save the data. Usbfadm requires administrator privileges to run, so use the doas command to run usbfadm.
fugu-demo$ doas usbfadm
doas (yoshi@fugu-demo.localnet) password:
Welcome to usbfadm.
USB flash drive administration tool for FuguIta
Version/Arch: 7.2/amd64 (FuguIta-7.2-amd64-202302081)
Boot mode: manual
Target device: /dev/sd0d
Data saved as: fugu-demo
readline capability available
TAB to complete the reserved words
Type ? for help.
? : ? ->
First, specify the destination partition using the target command. ~
After confirming that the storage device is installed, press ENTER to scan the device. ~
Devices with a + sign in front of the device name are devices that can be used for saving.
? : ? --> target
Searching USB flash drives
Please make sure the device inserted.
Then press ENTER ->
cd0a sd0a +sd0d
targe device--> sd0d
Then name the data you want to save using the saveas command. ~
If the name is omitted, the host name will be used as the save
sd0d : ? --> saveas
Name of saved data --> fugu-demo
Your data will be saved as ``fugu-demo''.
Notice that the prompt string, which was originally "? : ?", has changed.
The values ?k?kset by the target command and saveas just now are displayed in the prompt so that you can check them.
Finally run the sync command to actually save the data.
/dev/sd0d : fugu-demo -> sync
Sync current mfs as fugu-demo, OK? -> y
building file list ... done
created directory /mnt/livecd-config/fugu-demo
./
etc/
etc/bgpd.conf
etc/boot.conf
:
:
var/yp/Makefile.yp
var/yp/Makefile.yp.dist
var/yp/README
sent 16455591 bytes received 232568 bytes 180412.53 bytes/sec
total size is 15492096 speedup is 0.93
Let's display the information of the data saved with the info command.
/dev/sd0d : fugu-demo -> info
Filesystem Size Used Avail Capacity Mounted on
/dev/sd0d 218M 18.9M 179M 9.6% /mnt
scanning...
18.9M 6.0/amd64/fugu-demo
The data seems to be saved without problems, so exit usbfadm.
/dev/sd0d : fugu-demo -> bye
fugu-demo$
>''[Memo]''~
Saving with usbfadm can also be done from the shell command line.
fugu-demo$ doas usbfadm -r
doas (yoshi@fugu-demo.localnet) password:
========================================
= Sync current mfs as fugu-demo into /dev/sd0d
=
sending incremental file list
deleting etc/X11/xenodm/authdir/authfiles/A:0-G4H73h
:
var/spool/smtpd/purge/
var/spool/smtpd/temporary/
#
Option -r tells usbfadm to re-save the file. ~
~
You can also use cron to run periodically in the background.
# crontab -l
#minute hour mday month wday command
--- omit ---
#save session periodically
#0 */4 * * * PATH=$PATH:/usr/local/bin /usr/fuguita/sbin/usbfadm -rq
This causes usbfadm saves to happen in the background every 4 hours. -q is a "quiet" option that does not show progress etc.
>''[Memo]''~
''⇒''You can use any partition that is formatted in the OpenBSD FFS format and has a directory named /livecd-config, even if it is not created with the usbfadm command.
***Exit Fuguita [#o83b9962]
To terminate FuguIta operation, log in as root and execute the [[shutdown>man:shutdown.8]] command. ~
Or as a normal user, execute the shutdown command using the doas.
fugu-demo$ doas shutdown -h -p now
doas (yoshi@fugu-demo.localnet) password:
Shutdown NOW!
shutdown: [pid 4771]
fugu-demo$
*** FINAL System shutdown message from root@fugu-demo.localnet ***
System going down IMMEDIATELY
System shutdown time has arrived
fugu-demo$ syncing disks... done
In the above example, the -h option is specified as a specification to the shutdown command, so the system is halted.
In addition, since the -p option is specified at the same time, the power will be automatically turned off immediately after stopping (some PC models do not support turning off the power with the -p option. In this case, to turn off the unit). ~
If you specify the -r option instead of the -h or -p options, the system will reboot. ~
In Fuguita, user-created data and system configuration files are held in memory. It will disappear.
The fact that the operations performed on Fuguita disappear when the system is stopped means that from a different point of view, it is less likely to affect existing systems installed on the internal hard disk. ~
In other words, deleting files, stopping processes, etc. as root has limited impact, so you can practice system administration with confidence.
///
///しかし、このLiveUSB版FuguItaは、使用するUSBメモリのサイズに関係なく2GBしか領域を使用できません。~
///この、FuguItaのシステムが約1GBを占有していますので、usbfadmでデータを保存できるのは1ギガバイト程度です。
///
///FuguItaに付属のusbfadmユティリティには、データを保存するパーティションのサイズを拡張できるexpandと呼ばれる機能があります。~
///以下にusbfadm expandの使用例を示します。
/// fugu-demo# usbfadm ← root権限でusbfadmを起動
///
/// Welcome to usbfadm.
/// USB flash drive administration tool for FuguIta
///
/// Version/Arch: 7.2/amd64 (FuguIta-7.2-amd64-202302081)
/// Boot mode: manual
/// Target device: not set
/// Data saved as: not set
///
/// readline capability available
/// TAB to complete the reserved words
///
/// Type ? for help.
///
/// ? : ? ->target ← targetコマンドで拡張するパーティションを指定
///
/// Searching storage device
/// Please make sure the device inserted.
/// Then press ENTER ->
/// sd0i sd0j sd0k sd1a +sd1d vnd5a ← 検出されたパーテションの一覧。頭に +記号が
/// target device ->sd1d 付いているのがデータ保存用パーティション
///
/// sd1d : ? ->info ← 指定したパーティションの容量を見てみる
///
/// Filesystem Size Used Avail Capacity iused ifree %iused Mounted on
/// /dev/sd1d 1.1G 2.5K 1.1G 0% 5 1287065 0% /mnt ← 容量は1.1GB
///
/// scanning...
///
/// 512B 7.0/amd64/noasks
///
/// sd1d : ? ->expand ← expand機能を呼出し
///
/// Select the expansion method for sd1d:
/// 1: growfs - expands the partition while retaining its contents
/// 2: newfs - expand and format the partition
/// 3: [exit without expansion]
/// ->2 ← "newfs"を使ってパーティションを拡張
///パーティションの拡張方法には、「growfs」と「newfs」とがあります。~
///growfsではパーティションに保存されているデータを保持したまま領域を拡張します。~
///newfsでは、領域を拡張した後、パーティションをフォーマットし直します。~
///newfsでは、保存されているファイル・ディレクトリはて消えてしまいますので、ご注意下さい。一方、growfsにおいても、実行前にデータのバックアップを取っておくことをお勧めします。
/// This makes sd1d as large as possible.
/// Note that all contents in sd1d will be removed
/// Do you proceed? [y/N] -> y
///
/// /dev/rsd1d: 3136.5MB in 6423488 sectors of 512 bytes
/// 257 cylinder groups of 12.24MB, 3134 blocks, 6272 inodes each
/// super-block backups (for fsck -b #) at:
/// 144, 25216, 50288, 75360, 100432, 125504, 150576, 175648, 200720, 225792,
/// :
/// 6368432, 6393504, 6418576,
/// ** /dev/rsd1d
/// ** File system is already clean
/// ** Last Mounted on
/// ** Phase 1 - Check Blocks and Sizes
/// ** Phase 2 - Check Pathnames
/// ** Phase 3 - Check Connectivity
/// ** Phase 4 - Check Reference Counts
/// ** Phase 5 - Check Cyl groups
/// 1 files, 1 used, 5611214 free (14 frags, 701400 blocks, 0.0% fragmentation)
///
/// sd1d : ? ->info ← 拡張後の容量を確認
///
/// Filesystem Size Used Avail Capacity iused ifree %iused Mounted on
/// /dev/sd1d 2.7G 2.5K 2.7G 0% 5 1611897 0% /mnt ← 2.7GBに増加している
///
/// scanning...
///
/// 512B 7.0/amd64/noasks
///
/// sd1d : ? ->quit
///
/// Bye bye...
/// fugu-demo#
///>''【メモ】'' ~
///''⇒''ファイルシステムのパラメータ(フォーマット形式、ブロックサイズ、フラグメントサイズ、iノード密度など)は、growfsでは拡張前のものがそのまま使われるのに対し、newfsでは拡張後のサイズに合ったパラメータが設定され、フォーマットが実行されます。
///
///***ログアウト [#uaac716c]
///現在使用しているアカウントを終了(ログアウト)するにはexitコマンドを力します。
/// fugu-demo# exit
///
/// OpenBSD/amd64 (fugu-demo.localnet) (tty00)
///
/// login:
///
///**一般ユーザでログイン [#tbce0de3]
///前で一般ユーザのアカウントを作成しましたので、このアカウントでログインしてみます。
/// OpenBSD/amd64 (fugu-demo.localnet) (tty00)
///
/// login: yoshi
/// Password:
/// OpenBSD 7.2-stable (RDROOT.MP) #30: Wed Feb 8 13:07:26 JST 2023
///
/// Welcome to FuguIta, the OpenBSD-based live system.
///
/// FuguIta aims to help popularize OpenBSD operating system by making it easier
/// to get started with.
///
/// For information on FuguIta's specific features and how to use them, please
/// refer to the documentation on https://fuguita.org/.
///
/// If you have any questions or suggestions for FuguIta, please send an email to
/// me or post a message to fuguita.org's message board.
/// Please feel free to contact me.
///
/// Yoshihiro Kawamata
/// kaw@on.rim.or.jp , https://fuguita.org/
///
/// fugu-demo$ pwd
/// /ram/home/yoshi
/// fugu-demo$ ls
/// fugu-demo$ ls -a
/// . .Xdefaults .cvsrc .mailrc .ssh
/// .. .cshrc .login .profile
/// fugu-demo$
///>''【メモ】''~
///''⇒''rootでログインしたときのシェルのプロンプトは「fugu-demo#」になりますが、一般ユーザの場合は「fugu-demo$」となります。~
///以降の例示箇所でもこの表記に従います。
///
///#aname(usbfadm_sync)
///***USBメモリにファイルを保存する [#c2ed3d80]
///FuguItaではユーザが作成したファイル、設定の変更、追加されたパッケージ、システムのログなど一切のデータをLiveUSB版のFuguItaに作成されている保存用パーティションに保存し、次回以降の起動時に呼び出すことができます。
///
///データを保存するためにはusbfadmコマンドを実行します。
///usbfadmを実行するためには管理権限が必要なので、doasコマンドを使ってusbfadmを実行します。
/// fugu-demo$ doas usbfadm
/// doas (yoshi@fugu-demo.localnet) password:
///
/// Welcome to usbfadm.
/// USB flash drive administration tool for FuguIta
///
/// Version/Arch: 7.2/amd64 (FuguIta-7.2-amd64-202302081)
/// Boot mode: manual
/// Target device: /dev/sd0d
/// Data saved as: fugu-demo
///
/// readline capability available
/// TAB to complete the reserved words
///
/// Type ? for help.
///
/// ? : ? ->
///まず、targetコマンドを使用して保存のパーティションを指定します。~
///保存用のデバイスが着されていることを確認した後、ENTERを押下するとデバイスのスキャンが行われます。~
///デバイス名の前に+記号がついているものが、保存に使用することができるデバイスです。
/// ? : ? --> target
///
/// Searching USB flash drives
/// Please make sure the device inserted.
/// Then press ENTER ->
/// cd0a sd0a +sd0d
///
/// targe device--> sd0d
///
///次に、saveasコマンドを使用して保存するデータに名前を付けます。~
///名前を省略した場合、ホスト名が保存名として使用されます。
/// sd0d : ? --> saveas
/// Name of saved data --> fugu-demo
///
/// Your data will be saved as ``fugu-demo''.
///当初「? : ?」だったプロンプトの文字列が変化していることにご注目下さい。
///今ほどのtargetコマンドとsaveasで設定した値がプロンプトに表示され、確認ができるようになっています。
///
///最後にsyncコマンドを実行し、データを実際に保存します。
/// /dev/sd0d : fugu-demo -> sync
///
/// Sync current mfs as fugu-demo, OK? -> y
///
/// building file list ... done
/// created directory /mnt/livecd-config/fugu-demo
/// ./
/// etc/
/// etc/bgpd.conf
/// etc/boot.conf
/// :
/// :
/// var/yp/Makefile.yp
/// var/yp/Makefile.yp.dist
/// var/yp/README
///
/// sent 16455591 bytes received 232568 bytes 180412.53 bytes/sec
/// total size is 15492096 speedup is 0.93
///infoコマンドで保存されたデータの報を表示してみます。
/// /dev/sd0d : fugu-demo -> info
///
/// Filesystem Size Used Avail Capacity Mounted on
/// /dev/sd0d 218M 18.9M 179M 9.6% /mnt
///
/// scanning...
///
/// 18.9M 6.0/amd64/fugu-demo
///データは問題なく保存されているようなのでusbfadmを終了します。
/// /dev/sd0d : fugu-demo -> bye
///
/// fugu-demo$
///>''【メモ】''~
///usbfadmによる保存は、シェルのコマンドラインからも行うことができます。
/// fugu-demo$ doas usbfadm -r
/// doas (yoshi@fugu-demo.localnet) password:
///
/// ========================================
/// = Sync current mfs as fugu-demo into /dev/sd0d
/// =
/// sending incremental file list
/// deleting etc/X11/xenodm/authdir/authfiles/A:0-G4H73h
/// :
/// var/spool/smtpd/purge/
/// var/spool/smtpd/temporary/
/// #
///オプション -r は、usbfadmにファイル保存の再実行を指示します。~
///~
///また、cronを使用してバックグラウンドで定期的に実行することもできます。
/// (crontabファイル)
/// # crontab file
/// #minute hour mday month wday command
/// ~ 略 ~
/// #save session periodically
/// #0 */4 * * * PATH=$PATH:/usr/local/bin /usr/fuguita/sbin/usbfadm -rq
///これにより、usbfadmによる保存がバックグラウンドで4時間ごとに行われます。-q は進捗状況などを表示しない「quiet」オプションです。
///
///>''【メモ】''~
///''⇒''usbfadmコマンドで作成したパーティションでなくとも、OpenBSDのFFS形式でフォーマットされていて、/livecd-configというディレクトリが作成されているパーティションであれば使用できます。
///
///***FuguItaを終了する [#lcb9f9a0]
///FuguItaの運用を終了するにはrootでログインし、[[shutdown>man:shutdown.8]]コマンドを実行します。~
///または一般ユーザで、doasコマンドを使用してshutdownコマンドを実行します。
/// fugu-demo$ doas shutdown -h -p now
/// doas (yoshi@fugu-demo.localnet) password:
/// Shutdown NOW!
/// shutdown: [pid 4771]
/// fugu-demo$
/// *** FINAL System shutdown message from root@fugu-demo.localnet ***
/// System going down IMMEDIATELY
///
///
///
/// System shutdown time has arrived
///
/// fugu-demo$ syncing disks... done
///上の例では、shutdownコマンドへの指定として -h オプションを指定しているので、システムは停止(halt)します。
///また、同時に-p オプションを指定しているので停止直後に電源が自動的にOFF (power off)になります(PCによっては -p オプションによる電源OFFに対応していない機種もあります。この場合は手動で本体の電源をOFFにします)。
///~ -h オプションや -p オプションの替わりに -r オプションを指定すると、システムは再起動(reboot)します。~
///
///FuguItaでは、ユーザが作成したデータやシステムの設定ファイルはメモリ上に保持されていますので、[[usbfadmコマンドによる保存>#usbfadm_sync]]を行わないでシステムを停止すると、それらのデータは消えてなくなります。
///
///FuguIta上で行った操作がシステムを停止すると消えてしまうということは、見方を変えると蔵ハードディスクにインストールされている既存のシステムなどに影響を及ぼしにくいということでもあります。~
///つまり、rootでファイルの消去やプロセスの停止などを行ってもその影響は限定的なので、システム管理の練習などを安心して行うことができます。
///
///#aname(boot_mode3)
///**保存した設定やファイルを読み込む [#p11aec5c]
///[[設定やファイルを保存する>#usbfadm_sync]] で説明した方法で保存されたデータは以降の起動時に読み込ませ、環境を復帰させることができます。~
///データを復帰させるには、起動モードの選択でモード3を選択します。
/// Boot modes:
/// 0: fresh boot - standard mode as a live system
/// 1: fresh boot - less memory, faster boot (/usr is non-writable, can't pkg_add)
/// 2: fresh boot - works using only RAM (about 1GB or more of RAM required)
/// 3: boot with retrieving saved files from storage device
/// or enter passphrase for an encrypted volume
/// 4: boot with retrieving saved files from floppy disk
/// 5: interactive shell for debugging
/// ->3
/// scanning partitions: sd0a sd0d sd0i cd0a
/// Device(s) found:
/// loadable from: sd0d
/// Which is FuguIta's storage device? [default: sd0d] -> sd0d
/// /dev/sd0d : available data;
///
/// fugu-demo
///
/// config name -> fugu-demo
/// Copying files from flash to ram ...
///保存したデータ名を指定すると退避させていたデータを復帰し、起動が再開されます。~
///各種設定値もすべて復帰するため、最初に説明した起動モード0と違いネットワークの設定などは訊かれません。
///
///ログイン後、さらにデータを保存することもできます。手順は [[設定やファイルを保存する>#usbfadm_sync]] で説明した方法と同じですが、
///すでにLiveUSB上にファイルが保存されているため、変更したファイルやディレクトリのみが対象となります。~
///そして、保存デバイス名と保存名はすでに設定済みなので、いきなりsyncコマンドを実行してもOKです。
///
///シャットダウン時、デフォルトではデータの退避は自動的に行われないので、その都度手動でusbfadmコマンドを実行する必要があります。
///これを自動化したい場合は [[終了時にデータが自動で保存されるようにする>fg3:autosave]] の設定を行って下さい。
///
///***X Window Systemを起動してみる。 [#x82da9c0]
///OpenBSDはX Window Systemというグラフィクス環境を含んだ形で出荷されており、FuguItaもこのX Window Systemを使用することができます。
///>''【メモ】''~
///''⇒''X Window Systemは「X」や「X11」などと略して呼んでもよいことになっています。以下、X Window SystemをXと表記することにします。
///
///Xを使用するには、準備編の[[ログイン方法の選択>fg1:loginmethod]] で説明したように、ログイン方法としてX Window Systemを選択します。
/// Do you login with Console or X Window System?
/// [default: Console] -> x
///Xが起動すると、以下のようなログイン画面が表示されますので、ユーザ名とパスワードを入力します。
///#ref(FuguItaガイド/xenodm-login.png,,50%)
///ログインに成功すると以下のような画面になります。
///#ref(FuguItaガイド/startx.png)
///画面左上の白いウィンドウは「端末エミュレータ」というもので、X上でシェルとのセッションなど、文字端末での作業を行うためのプログラムです。~
///右上には時計が表示されています。~
///左下にあるものは「xconsole」といい、システムのログ情報を表示するプログラムです。起動直後はこのプログラムはアイコン化されています。~
///右下の表のようなものは、「仮想デスクトップ」といい、複数のデスクトップ画面を切り替えて使用できるようにするものです。標準の設定では3列×3行=9面のデスクトップ画面を切り替えられます。
///
///壁紙部分(Xでは、「ルートウィンドウ」と呼びます)でマウスの左ボタンを押すとメニューが表われます。このメニューからXのアプリを選択して実行できます。メニューにないものは端末エミュレータからコマンドを投入して実行することもできます。
///
///以下の画面は、実際にアプリを実行してみた例です。
///#ref(FuguItaガイド/various-xclt.png,wrap)
///ルートウィンドウではマウスの中ボタンや右ボタンを押すことで、別のメニューが表示されます。
///>''【メモ】''~
///''⇒''Xの操作は3ボタンマウスによる操作を想定して設計されています。
///中ボタンのないマウスの場合は、左右のボタンを両方同時に押すか、あるいはホイールを押します。
///
///Xを終了するには、マウスの左ボタンのメニュー中、「Exit」を選択し、さらに本当に終了するかを確認するウィンドウに対し「Exit」を選択します。
///#ref(FuguItaガイド/quit-verify-win.png,wrap)
///
///>''【メモ】''~
///''⇒''OpenBSDには、X Windowを使うためのソフトウェア(デスクトップ環境)が何種類か用意されており、また、日本語の表示や入力用のソフトウェアを追加することもできます。これについては応用編の [[日本語デスクトップ環境を導入する>fg3:dtjsetup]] で説明致します。
///
///*使用法の習得 [#r70ef50e]
///#aname(useunix)
///** Unix系OSの使い方を調べる [#h19a6ead]
///本ガイドの冒頭で説明したように、FuguItaはUnix系OSの一種である OpenBSD をベースにして作成されています。
///
///Unixは約半世紀前の1969年に開発され、以降さまざまなコンピュータ向けの実装が作成されてきました。今ではUnix系のOSはスーパーコンピュータからスマートフォンや家電製品、あるいは小さな組込み機器までさまざまな環境で使用されるに至っています。
///
///Unix系OSはMicrosoft WindowsなどのOSとは操作方法が大きくことなっており、最初はどのように使ってよいか見当がつかない方もいるかも知れません。
///
///Unix系OSの基本的な部分はコンシューマユーザ向けに作られてはいません。OpenBSDも例外ではなく、予備知識を持たないユーザを想定した親切なユーザインターフェースなどは初期状態ではほとんど用意されていません。言い替えると''「なんとなくあちこちいじっているうちに使い方がわかった」ということにはなりません。''
///
///そんなUnix系OSを理解し、活用するにはどのようなアプローチを取ればよいのでしょうか。
///
///***書籍の用意 [#u17669c8]
///>Unix系OSに関する基本を解説している書籍を用意しましょう。~
///様々な実装が存在するUnix系OSですが、それらには [[Unix哲学>https://ja.wikipedia.org/wiki/UNIX%E5%93%B2%E5%AD%A6]] とも呼ばれる共通した考え方があります。この考え方を理解し、実践できるようになることがUnix系OSを習得する上でのキーになります。~
///書籍の内容としては特定の実装だけを対象とせず、基本的な概念から応用の入口までを網羅的・体系的に解説しているものがよいでしょう。~
///>「これ一冊読めばすべてOK」というような書籍はなかなかないのですが、定評のあるものをいくつか挙げておきます;
///-はじめてUNIXで仕事をする人が読む本 / 木本雅彦 他 著 / KADOKAWA アスキーメディアワークス
///-新 The Unix Super Text [上] / 山口和紀・古瀬一隆 著 / 技術評論社
///
///>以下のものは副読本として読むと、より理解が進むかもしれません;
///-Unixという考え方-その設計思想と哲学 / Mike Gancarz著 芳尾桂訳 / オーム社
///-Linuxを「読む」 / こじまみつひろ著 / 毎日コミュニケーションズ
///
///#aname(man)
///***オンラインマニュアルを活用する [#w1893733]
///>やはり自分で手を動かすことが、効果的なスキル習得の基本になります。~
///その際、やみくもにやってみるのではなく、システムに内蔵されているオンラインマニュアル(manコマンド)を活用しましょう。オンラインマニュアルは記述が、違う実装に基いて説明している、というような弱点はありません。
///>>''【メモ】''~
///''⇒''Unixのオンラインマニュアルは幾つかの章に別れています。~
///同じ名前の項目が複数の章にある場合があります。例えば「sleep」は、1章(一般コマンド)と3章(ライブラリ)の両方にあり、それぞれsleep(1)、sleep(3)の様に記述します。ですので、sleepコマンドのコマンドラインを知りたい場合は、
/// $ man 1 sleep
///C言語でプログラミングをしていて、sleep関数の使い方を知りたい場合は、
/// $ man 3 sleep
///として第3章にあるsleep関数の説明を表示します。
///
///ですので、これ以降「ls(1)」のような表記が出てきますが、これは「"man 1 ls"を実行してオンラインマニュアルの1章にある"ls"の項を参照して下さい」という意味になります。
///>''【メモ】''~
///''⇒''オンラインマニュアルのことをマニュアルページと呼ぶこともあります。意味は同じです。
///
///オンラインマニュアルとは別に、Unixのコマンドの多くは自分自身の使用説明を表示する機能を持っています;
/// $ man
/// usage: man [-acfhklw] [-C file] [-I os=name] [-K encoding] [-M path] [-m path]
/// [-O option=value] [-S subsection] [-s section] [-T output] [-W level]
/// [section] name ...
/// $ cp -?
/// cp: unknown option -- ?
/// usage: cp [-fip] [-R [-H | -L | -P]] source target
/// cp [-fip] [-R [-H | -L | -P]] source ... directory
///上の例ではmanコマンドとcpコマンドのヘルプメッセージを表示させています。~
///このようにコマンドのヘルプメッセージは非常に簡素な説明なので、忘れてしまったコマンドラインオプションを思い出すため、といったような備忘録的な役割で使用されます。
///
///***「参考情報」としてネットを活用
///>インターネットを活用するとUnix系OSに関連する情報も、簡単に得ることができます。 ~
///しかし、前項で説明したような弱点もあります。特に検索エンジンでの検索結果については目の前の実機にもあてはまるかどうかは自分で判断する必要があります。検索サイトの結果は「参考情報」として活用するのがよいでしょう。~
///さらに、現在では多くのUnix系OSが開発コミュニティなどによる「公式サイト」を持っています。公式サイトの情報は一次情報として活用できます。~
///
///***まとめ [#m2783069]
///以上述べたことを例えば「ファイルの属性」というトピックにあてはめて考えると、次のようになるでしょう;
///
///-書籍で基礎事項を押さえる ~
///→ファイルのオーナ・グループ・パーミッションとは何か、どのようなコマンドで操作するかを調べる。
///
///-オンラインマニュアル等で確認しながら実際に操作 ~
///→実際にchown, chgrp, chmodコマンドなどを実行し、結果を確認してみる。どのようなコマンドラインオプションがあるかなどをmanコマンドで調べる。
///
///-ネットで関連情報・参考情報をゲット~
///→ネットの検索などで注意点、はまりやすい点、色々な応用法などを調べてみる。~
///→公式サイトで関連情報を調べる ... 仕様の変更やセキュリティホール情報がないか、など。
///
///FuguItaは以上で述べたようなUnix系OSの習得にも向いています。つまり、インストール作業不要というライブシステムの特徴を活かし、ユーザが気軽に色々と試せる環境、失敗しても容易にやりなおせる環境を提供しています。
///
///#aname(useopenbsd)
///**OpenBSDの使い方を調べる [#g576b58f]
///前節の [[Unix の使い方を調べる>#useunix]] ではUnix系OSの使用経験のあまりない人がUnix系OSの使い方を習得するためのヒントについて説明しましたが、この節ではOpenBSDを使う場合の情報源やそれらを活用する上でのポイントについて説明します。
///
///***導入
///rootでログインすると、OpenBSDプロジェクト開発リーダーTheo de Raadt氏からのメールが届いています。
/// # mail
/// Mail version 8.1.2 01/15/2001. Type ? for help.
/// "/var/mail/root": 1 message 1 new
/// >N 1 deraadt@do-not-re Sun Oct 18 07:58 86/4565 Welcome to OpenBSD 5.8!
/// & more 1
/// Message 1:
/// From deraadt@do-not-reply.openbsd.org Sun Oct 18 07:58:58 MST 2015
/// Date: Oct 18 07:58:58 MST 2015
/// From: deraadt@do-not-reply.openbsd.org (Theo de Raadt)
/// To: root
/// Subject: Welcome to OpenBSD 5.8!
///
/// This message attempts to describe the most basic initial questions that a
/// system administrator of an OpenBSD box might have. You are urged to save
/// this message for later reference.
/// ....(以下略)....
///このメールでは、OpenBSDをインストールした人が最初に持つと思われる疑問について説明しています。メール本文に書いてある情報源をたどってゆくことで、OpenBSDを使用する上での様々なノウハウを得ることができます。
///
///以下このメールの内容と重複する部分もありますが、システム上の各種情報源について触れていきます。
///
///***システム内のドキュメント
///[[Unixの使い方を調べる>#useunix]] で述べたようにオンラインマニュアルはUnix系OSの最も基本的な情報源ですが、OpenBSDにおいても例外ではありません。~
///そのことはインストール直後のroot宛てメールにおいても、以下のように強調されています;
/// Again, PLEASE READ THE MANUAL PAGES. Our developers have spent countless
/// hours improving them so that they are clear and precise.
///マニュアルページには、特に導入のためのエントリも幾つか用意されています。
///:[[help>man:help.1]]|Unix初心者向けのエントリです。コマンドラインで''help''コマンドを実行した場合もこのエントリが表示されます。
///:[[man>man:man.1]]|manコマンドの説明です。OpenBSDではmandocというプログラムによってマニュアルページのシステムが再実装されていますが、manコマンドの使い方は他のUnix系OSとほぼ同じです。
///:[[afterboot>man:afterboot.8]]|インストール直後にチェックを行ったほうがよい項目について解説しています。この文書の [[入門編>fg2:pagetop]] より詳しく網羅的な内容ですので、ご一読をお勧めします。
///:intro|マニュアルページはカテゴリごとに章に別れていますが、その各章に関する説明です。例えば、
/// man 1 intro
///とすると、一般コマンドカテゴリについての説明が、
/// man 5 intro
///では、ファイル形式のカテゴリ全般についての説明が表示されます。
///
///OpenBSDでは、マニュアルページの章立ては以下のようになっています;
///|1 |一般コマンド |
///|2 |システムコールとエラー番号 |
///|3 |ライブラリ |
///|4 |デバイスドライバ |
///|5 |ファイル形式 |
///|6 |ゲーム |
///|7 |その他 |
///|8 |システム保守・運用のためのコマンド |
///|9 |カーネル |
///
///各セクションのマニュアルの内容は現状のシステムに追従し続けており、常にアップデートと推敲が行われています。~
///また他のUnix系OSでは4章(デバイスドライバ)などの章で、ほとんど情報が提供されていない実装系もありますが、OpenBSDではこのような情報も完備されており、例えばWi-Fiの設定のように使用するハードウェアに依存した設定情報が必要な場合も十分な情報を得ることができます。
///>''【メモ】''~
///''⇒''OpenBSDに内蔵されているオンラインマニュアルはmanコマンドで読めますが、ウェブブラウザで man.openbsd.org にアクセスして読むこともできます。~
///FuguItaガイド内でもコマンドの説明中 [[ls(1)>man:ls.1]] のようにリンクを張ってある部分はウェブのオンラインマニュアルを参照できます。
///
//////|TO BE REVISED|
///#ref(FuguItaガイド/emacsinfo.png,around,right)
///GNUプロジェクト由来のコマンドやEmacs上で動作するアプリケーションに関しては、Info形式のドキュメントが提供されている場合があります。~
///Infoドキュメントを閲覧するには、[[info>man:info.1]]コマンドを実行します。
///>''【メモ】''~
///''⇒''Emacsエディタを追加インストールしている環境では、InfoドキュメントはEmacsエディタから、''<Meta>-x info<Enter>''、あるいは''<Escape> x info<Enter>''と入力し、閲覧することができます。
///#clear
///
///マニュアルページやInfo以外にもアプリケーション固有のドキュメントがあります。
///それらは主に次に挙げるディレクトリの下にあります;
///-/usr/share/doc
///-/usr/X11R6/share/doc
///-/usr/local/share/doc
///-/usr/local/share/gtk-doc
///
///***システム上のファイル [#sd8aa942]
///サーバやアプリケーションソフトなどの設定ファイルはすべて/etc以下に集約されています。~
///パッケージ管理ツールports/packagesで追加されたソフトウェアは、/usr/local以下にインストールされますが、設定ファイルに関しては/etc以下に配置されます。X関連の設定ファイルについても同様です。
///
///システムの動作ログは、/var/log以下にあります。唯一、cronのみが/var/cron/logというログファイルを作成します。
///
///[[起動時の設定>fg1:bootsetup]] で説明した起動時に表示されるカーネルメッセージは、/var/run/dmesg.boot というファイルに記録されています。システム起動完了後はこのファイルの内容を閲覧することで、システム起動時の様子を調査することができます。
///
///***インターネット上の情報
///:http://www.openbsd.org/|プロジェクトによって運営されている公式サイト。[[OpenBSD全般に関する詳細なガイド>http://www.openbsd.org/faq/index.html]] や [[システムの更新情報>http://www.openbsd.org/errata72.html]] など、ウェブ上のOpenBSD関連情報の起点です。
///:http://undeadly.org/ 「OpenBSD Journal」|OpenBSD関連のニュースサイト。その都度OpenBSDの旬の話題が取り上げられ、OpenBSD開発の最前線の様子なども知ることができます。以前、[[FuguItaの紹介記事>http://undeadly.org/cgi?action=article&sid=20131210093950]] も投稿されました。
///:メーリングリスト|[[公式に管理・運営されているメーリングリスト>http://www.openbsd.org/mail.html]] があります。また、これらのアーカイブサイトもあり、メーリングリストに加入しなくてもウェブ上での閲覧が可能です。
///
///***書籍 [#y291b608]
///作者の知る限り、OpenBSDユーザ向けに書かれた日本語の書籍は2023年現在出版されておりません。~
///BSD系のUnix向けの書籍の中には、
///-BSD HACKS ~ プロが使うテクニック&ツール100選 / Dru Lavigne著,桃井康成監修,林秀幸訳 / オライリー・ジャパン
///
///など、部分的にOpenBSDについて言及されている書籍もあります。
///
///英語の書籍に関しては [[公式サイトの記述>http://www.openbsd.org/books.html]] をご参照下さい。~
///'''Absolute OpenBSD, 2nd Edition''' や '''The book of PF, 3rd Edition'''など、OpenBSD向けの書籍がいくつか出版されているようです。
#navi(FuguItaGuide)