![[PukiWiki]](image/pukiwiki.png "[PukiWiki]")
# pkg_add dvd+rw-tools
# ftp http://mirror-of-fuguita/FuguIta-6.X-20YYMMDDN.iso.gzNote that the part YYMMDDN must be replaced with the version string of real ISO image.
# gzip -d FuguIta-6.X-20YYMMDDN.iso.gz # dvd-format /dev/rcd0c (format media, if you will be burn it first) # growisofs --dvd-compt -Z /dev/rcd0c=FuguIta-6.X-20YYMMDDN.iso
To make a LiveUSB version of FuguIta, prepare a USB memory with a size of 2 gigabytes or more, and write the downloaded and expanded IMG format file. The following is an example of writing using OpenBSD.
- Download the image for USB flash drive
# ftp http://livecd-mirror.ebug.jp/LiveDVD/FuguIta-6.X-20YYMMDDN.img.gz- Decompressing that image, and write it into USB storage device.
# gzip -dc FuguIta-6.X-20YYMMDDN.img.gz | dd of=/dev/rsd?c bs=1mThe "/dev/rsd0c" part in the above example is the designation of the write destination device. This depends on the connection status of the peripherals of your PC. If you execute this command, all the data recorded in the specified device will be erased, so be sure to check in advance if the write destination is correct.
Even if you use a USB memory of 2 GB or more, the portion exceeding 2 GB will not be used. If you want to create a LiveUSB version FuguIta that matches the size of the USB memory, refer to Remastering LiveUSB on running FuguIta.
After displaying FuguIta's logo, selection of FuguIta's operational device will appear.
Unless you attached multiple FuguIta devices, simply press ENTER key (accepting default value) is OK.
============================================ = ______ __ _ = / ____/ | |_| |__ = / /____ ______ __ _| /_ _/_____ = / ___/ / / / __ \/ / / | | | | / _ | = / / / /_/ / /_/ / /_/ /| | | |_| (_) |__ =/_/ \____/\__ /\____/ |__| \___/____/__/ = __/ / = /___/ = = Welcome to FuguIta - OpenBSD Live System = http://fuguita.org/ ============================================= scanning partitions: wd0i wd0j cd0a FuguIta's operating device(s): cd0a. Which is FuguIta's operating device? [default: cd0a] ->
Next, enter capacity of TMPFS.
Unless you have the reason that you wish to fix the size of TMPFS, simply press ENTER key (accepting default value) is OK.
user memory: 495 MB Enter tmpfs size in MB. (0 is auto) [default: 0] ->
Select boot mode.
At first boot, we recommend mode 0.
Boot modes:
0: fresh boot - standard mode as a live system
1: fresh boot - less memory, faster boot (/usr is non-writable, can't pkg_add)
2: fresh boot - works using only RAM (about 1GB or more of RAM required)
3: boot with retrieving saved files from storage device
or enter passphrase for an encrypted volume
4: boot with retrieving saved files from floppy disk
5: interactive shell for debugging
->0
Set keyboard layout, then set root password
Enter keyboard type. pc-xt/pc-at keyboard: us de de.nodead fr fr.dvorak dk dk.nodead it uk jp sv sv.nodead no no.nodead us.declk us.dvorak us.colemak us.swapctrlcaps us.iopener uk.swapctrlcaps jp.swapctrlcaps fr.swapctrlcaps fr.swapctrlcaps.dvorak be.swapctrlcaps us.swapctrlcaps.dvorak us.swapctrlcaps.colemak us.swapctrlcaps.iopener es be ru ua sg sg.nodead sf sf.nodead pt lt la br tr tr.nodead pl hu si cf cf.nodead lv nl nl.nodead is is.nodead ee ee.nodead keyboard type -> us kbd: keyboard mapping set to us Changing password for root. New password: Retype new password:
Network Settings:
Enter host name (short name, i.e. no domain part).
Next, settings for IP protocols and their name resolution order
host name (without domain) -> fugu-demo IP version(s) to use: 4, 6, 46, 64 or n 46: IPv4 preferred over IPv6 in address resolution 64: reversed to 46 n: stand alone operation [46]-> '46' selected as default
Selecting network interface for setting
==[ifconfig -a]=========================
lo0: flags=8008<LOOPBACK,MULTICAST> mtu 32768
index 3 priority 0 llprio 3
groups: lo
em0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
lladdr 52:54:00:12:34:56
index 1 priority 0 llprio 3
media: Ethernet autoselect (1000baseT full-duplex)
status: active
enc0: flags=0<>
index 2 priority 0 llprio 3
groups: enc
status: active
========================================
Available network interface(s): em0
network interface to setup [em0] ->
Enter domain names after the host name
FQDN of this host -> fugu-demo.localnet
Name resolution method
When you select "Manual", IP address/Subnetmask/Default gateway will be prompted.
DNS setup; Manual : Enter up to three IPv4/IPv6 addresses, separated by spaces DHCP : Just press ENTER . no DNS : Enter "none". ->
If you wish to use X Window System, type X.
Do you login with C)onsole or X) Window System?
[default: C] ->
_________________________________________________
/ Setup for FuguIta ends. /
/ OpenBSD's boot sequence will follow. /
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Automatic boot in progress: starting file system checks.
kbd: keyboard mapping set to us
... snip ...
starting local daemons: cron.
fuguita: disabled KARL because of read-only media
Wed Aug 19 05:28:08 UTC 2020
OpenBSD/amd64 (fugu-demo.localnet) (tty00)
login:
(T.B.D)
(T.B.D)
By this procedure, the data partition will be automatically allocated.
Also, you can specify its size.
- First, create FuguIta LiveDVD or LiveUSB from download file, then run it.
- Login as root, then execute newdrive subcommand on the USB management tool usbfadm.
# usbfadm Welcome to usbfadm. USB flash drive administration tool for FuguIta Version/Arch: 6.7/amd64 (FuguIta-6.7-amd64-202008111) Boot mode: manual Data stored in: not set Data Saved as: not set Type ? for help. ? : ? ->newdriveScanning USB devices after pressing ENTER.Please make sure the device inserted. Then press ENTER ->Enter the device name of USB flash drive.
Contents of system log entries are displayed for your information;==== disk(s) and vnode devices ============================ sd0 at scsibus1 targ 0 lun 0: <VirtIO, Block Device, > sd0: 1024MB, 512 bytes/sector, 2097152 sectors sd1 at scsibus2 targ 0 lun 0: <VirtIO, Block Device, > sd1: 4096MB, 512 bytes/sector, 8388608 sectors vnd0: not in use vnd1: not in use vnd2: not in use vnd3: not in use vnd4: not in use vnd5: covering /sysmedia/fuguita-6.7-amd64.ffsimg on cd0a, inode 48172Select the disk you will install FuguIta toEnter the name of device which FuguIta will be installed->sd1There are several ways of boot. Choose one.
"Hybrid" enables boot with either Legacy BIOS or UEFI, but it's very difficult to change fdisk/GPT partition later.Select boot method: 1: [Legacy BIOS] 2: UEFI 3: none (only for save data) 4: Hybrid ->1Entering partition sizes.
If you answer "Y" for data encryption, input for passphrase will be prompted.Enter sizes for swap, user data and extra FAT. You can add suffix K, M, G or T (otherwise considered 'bytes'). '*' implies 'all' '0' doesn't make this partition.If you input any size of swap greater than 0, the maximum size of tmpfs can be expanded.3GB (3149MB) (6451136sectors) free swap->0 3GB (3149MB) (6451136sectors) free user data->2560m user data encryption? [y/N] -> Create an extra FAT partition? [y/n] -> y target disk: sd1 partition type=MBR boot type=Legacy -------------------- : ------ partition : size -------------------- : ------ whole disk : 4GB partition tables : 32KB UEFI system : 0B FuguIta system : 9 46MB FuguIta swap : 0B FuguIta user data : 2GB MSDOS FAT : 589MB -------------------- : ------ ***THIS IS THE LAST CHANCE*** If you type 'Y' now, all the data on sd1 will be lost. Are you sure to modify disk sd1? [y/N] -> y ======================================== = Clearing MBR, GPT and BSD disklabel = 1+0 records in 1+0 records out 1048576 bytes transferred in 0.040 secs (25613268 bytes/sec) ...snip... /dev/rsd1d: 2560.0MB in 5242880 sectors of 512 bytes 13 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each super-block backups (for fsck -b #) at: 32, 414688, 829344, 1244000, 1658656, 2073312, 2487968, 2902624, 3317280, 3731936, 4146592, 4561248, 4975904, ** /dev/rsd1d ** File system is already clean ** Last Mounted on /mnt ** Phase 1 - Check Blocks and Sizes ** Phase 2 - Check Pathnames ** Phase 3 - Check Connectivity ** Phase 4 - Check Reference Counts ** Phase 5 - Check Cyl groups 3 files, 3 used, 1289388 free (20 frags, 161171 blocks, 0.0% fragmentation) ? : ? ->quit Bye bye... #
