*FuguIta Start Guide [#p955f11f]
 In this page, we will explain the simple usage of FuguIta.
 *Creating FuguIta Media (on OpenBSD) [#d32ad315]
 FuguIta provides ISO images for LiveDVD and raw disk image files for LiveUSB etc. for i386 and amd64 platforms respectively.
 Download the apropriate file of FuguIta from the site described in [[FuguIta/Download]].
 **Creating LiveDVD [#kfbd62f8]
 The ISO image file of FuguIta is about 950MB in size. Therefore, use DVD media instead of CD media to burn this file.
 OpenBSD itself does not include software for burning DVDs. So install dvd+rw-tools to burn DVD from packages.
 -Install DVD writing tool
  # pkg_add dvd+rw-tools
 -Download the ISO image of FuguIta from the site described in [[FuguIta/Download]]. In following example, ''MIRROR'' means the name of appropriate download site which you will download.
  # ftp http://MIRROR.dl.fuguita.org/FuguIta-X.X-ARCH-YYYYMMDDN.iso.gz
 Note that the part ''YYYYMMDDN'' must be replaced with the version string of real ISO image.~
 and ARCH is one of i386 and amd64.
 -After decompression completed, burn that image into DVD-R or DVD-RW.
  # gzip -d FuguIta-X.X-ARCH-YYYYMMDDN.iso.gz
  # dvd-format /dev/rcd0c    (format media, if you will be burn it first)
  # growisofs --dvd-compat -Z /dev/rcd0c=FuguIta-X.X-ARCH-YYYYMMDDN.iso
 **Creating LiveUSB [#vaab2e8e]
 To make a LiveUSB version of FuguIta, prepare a USB memory with a size of 2 gigabytes or more, and write the downloaded and expanded IMG format file.
 The following is an example of writing using OpenBSD.
 -Download the image for USB flash drive
  # ftp http://MIRROR.dl.fuguita.org/FuguIta-X.X-ARCH-YYYYMMDDN.img.gz
 -Decompressing that image, and write it into USB storage device.
  # gzip -dc FuguIta-X.X-ARCH-YYYYMMDDN.img.gz | dd of=/dev/rsd?c bs=1m
 The ''/dev/rsd?c'' part in the above example is the designation of the write destination device. This depends on the connection status of the peripherals of your PC. If you execute this command, all the data recorded in the specified device will be erased, so be sure to check in advance if the write destination is correct.~
 If you are not sure what device to write, run the following command to check the name of the device before writing.
  # tail -f /var/log/messages    # Insert USB flashdrive after this command
  Jun 12 09:59:30 fugu-demo /bsd: inteldrm0: 1280x800, 32bpp
  Jun 12 09:59:30 fugu-demo /bsd: wsdisplay0 at inteldrm0 mux 1: console (std, vt1
  00 emulation), using wskbd0
  Jun 12 09:59:30 fugu-demo /bsd: wskbd1: connecting to wsdisplay0
  Jun 12 09:59:30 fugu-demo /bsd: wsdisplay0: screen 1-5 added (std, vt100 emulati
  Jun 12 09:59:30 fugu-demo slaacd[37947]: sendmsg: Can't assign requested address
  Jun 12 09:59:30 fugu-demo ntpd[67052]: creating new /var/db/ntpd.drift
  Jun 12 09:59:31 fugu-demo savecore: can't find device 17/1
  Jun 12 10:00:02 fugu-demo syslogd[50034]: restart
  Jun 12 10:00:50 fugu-demo /bsd: umass1 at uhub4 port 3 configuration 1 interface    # Following lines will
  0 "UFD 3.0 Silicon-Power32G" rev 2.10/0.0c addr 9                                   # appear after tail
  Jun 12 10:00:50 fugu-demo /bsd: umass1: using SCSI over Bulk-Only                   # command was executed.
  Jun 12 10:00:51 fugu-demo /bsd: scsibus5 at umass1: 2 targets, initiator 0
  Jun 12 10:00:51 fugu-demo /bsd: sd2 at scsibus5 targ 1 lun 0: <UFD 3.0, Silicon-
  Power32G, 1.00> removable serial.1f750916IP0001003248
  Jun 12 10:00:51 fugu-demo /bsd: sd2: 29624MB, 512 bytes/sector, 60669952 sectors
  ^C    # type Control+C to quit tail command
 In the above example, the detected device is sd2, so you should specify /dev/rsd2c as the device name to be written.
 The "r" in the device name means "raw device" and the "c" represents the entire device.
 **Creating media for Raspberry Pi 3 [#v20bde96]
 Files for Raspberry Pi 3 are provided in tar archive format.
 For how to create the media, please unpack the archive and refer to the README file included in it.
 *Booting FuguIta [#bc142f72]
 After displaying FuguIta's logo, selection of FuguIta's operational device will appear.
 Unless you attached multiple FuguIta devices, simply press ENTER key (accepting default value) is OK.
  =     ______               __   _
  =    / ____/              |  |_| |__
  =   / /____  ______  __  _|  /_   _/_____
  =  / ___/ / / / __ \/ / / |  | | | /  _  |
  = / /  / /_/ / /_/ / /_/ /|  | | |_| (_) |__
  =/_/   \____/\__  /\____/ |__| \___/____/__/
  =            __/ /
  =           /___/
  =  Welcome to FuguIta  -  OpenBSD Live System
  =                         http://fuguita.org/
  scanning partitions: wd0i wd0j cd0a
  FuguIta's operating device(s): cd0a.
  Which is FuguIta's operating device? [default: cd0a] ->
 Next, enter capacity of TMPFS. ~
 Unless you have the reason that you wish to fix the size of TMPFS, simply press ENTER key (accepting default value) is OK.
    user memory: 495 MB
  Enter tmpfs size in MB. (0 is auto)
  [default: 0] ->
 Select boot mode. ~
 At first boot, we recommend mode 0.
  Boot modes:
    0: fresh boot - standard mode as a live system
    1: fresh boot - less memory, faster boot (/usr is non-writable, can't pkg_add)
    2: fresh boot - works using only RAM (about 1GB or more of RAM required)
    3: boot with retrieving saved files from storage device
       or enter passphrase for an encrypted volume
    4: boot with retrieving saved files from floppy disk
    5: interactive shell for debugging
 Set keyboard layout, then set root password
  Enter keyboard type.
  pc-xt/pc-at keyboard:
  us de de.nodead fr fr.dvorak dk dk.nodead it uk jp sv sv.nodead no no.nodead us.declk
  us.dvorak us.colemak us.swapctrlcaps us.iopener uk.swapctrlcaps jp.swapctrlcaps
  fr.swapctrlcaps fr.swapctrlcaps.dvorak be.swapctrlcaps us.swapctrlcaps.dvorak
  us.swapctrlcaps.colemak us.swapctrlcaps.iopener es be ru ua sg sg.nodead sf sf.nodead
  pt lt la br tr tr.nodead pl hu si cf cf.nodead lv nl nl.nodead is is.nodead ee ee.nodead
  keyboard type -> us
  kbd: keyboard mapping set to us
  Changing password for root.
  New password:
  Retype new password:
 Entering the Host Name~
 Enter the host name with domain (FQDN: Fully Qualified Domain Name).  You can omit the domain part if you do not need it, for example, when using it in a closed network.
  Hostname with domain part (FQDN):
  only host name without domain part is also OK.
  -> fugu-demo.localnet
 which IP protocol version to enable~
 The default is "64" (enable both IPv6 and IPv4, but give priority to IPv6 for name resolution).
  IP protocol version(s) to be enabled: 4, 6, 46, 64 or "none"
    4: enable only IPv4
    6: enable only IPv6
    46: give priority to IPv4 name resolution
    64: give priority to IPv6 name resolution
    none: operate as standalone
  [64] ->
 If "none" is specified, the device will operate as a standalone device that does not use the network, and the configuration by gennetconfs will be completed.
 Specifying the network interface~
 Next, a list of network devices will be displayed, and you need to specify only one device that you want to configure.
  Network Interfaces: Choose one
    NIC	 type	   Name
  -------- ----- ------------
      bge1 ether Broadcom BCM57766
      ure0 ether Realtek USB 10/100/1000 LAN
      run0 wifi  Ralink 802.11 n WLAN
  [bge1] ->
 The device that appears at the top of the list will be the default.  If you specify a Wi-Fi device, you will be prompted to enter the SSID and encryption key.
  [bge1] -> run0
  Wi-Fi settings:
 If you press only ENTER with the WPA key, you will be prompted to enter WEP.
    WPA Key -> 
 If you press only ENTER with the WEP key, it means that you specify the connection without encryption.
 IPv6 Settings~
 If you have enabled IPv6, the following configuration input will appear.  Set the address to "auto" or manually, as described in the description.  In most cases, "auto" will work.  If "/prefixlen" is omitted, it is assumed that "/64" is specified.
  IPv6 - address and routing:
    Enter "auto" or "IPv6_address[/prefixlen] [default_gateway]"
    "auto" is an automatic setting by SLAAC.
    The "/prefixlen" part can be an integer between 0 and 128.
    If there is no default gateway, set the second field to "none" or leave it blank.
  [auto] ->
 5. IPv4 Settings~
 If you have enabled IPv4, you will be prompted to enter the following settings: "auto" for DHCP, as described in the description; otherwise, set the address manually.
 If you omit "/mask", a netmask that seems appropriate will be assumed.
  IPv4 - address and routing:
    Enter "auto" or "IPv4_address[/mask] [default_gateway]"
    "auto" is an automatic setting by DHCP.
    The "/mask" part can be specified in either format, such as "/" or "/24".
    If there is no default gateway, set the second field to "none" or leave it blank.
  [auto] ->
 6. DNS Server Settings~
 If you have configured IPv4 or IPv6 addresses manually, you will be prompted to enter DNS server settings.  If you want to communicate directly by specifying IP addresses, you do not need to use DNS servers, so enter only ENTER.
  DNS servers: up to 3 IP addresses, separated by spaces
 Finally, configuration files reflecting the configuration values you have entered will be written to the directory "/etc/netconfs/config_name".
  writing configured values:
 If you wish to use X Window System, type X.
  Do you login with C)onsole or X) Window System?
  [default: C] ->
             /      Setup for FuguIta ends.         /
            / OpenBSD's boot sequence will follow. /
  Automatic boot in progress: starting file system checks.
  kbd: keyboard mapping set to us
  ... snip ...
  starting local daemons: cron.
  fuguita: disabled KARL because of read-only media
  Wed Aug 19 05:28:08 UTC 2020
  OpenBSD/amd64 (fugu-demo.localnet) (tty00)
 * Initial settings after first root login [#p326c467]
 FuguIta will make the minimum settings necessary for the operation of the OS at boot time.
 In addition, you should configure the environment for running applications after root login as shown in the example below:
 ** expand a partition for data storage (LiveUSB only) [#fbb637bf]
 As explained in [["Creating LiveUSB">#vaab2e8e]], you can create a Fuguita LiveUSB by downloading the image file from the download site, extracting it, and writing to it.
 However, regardless of the size of the USB flash drive, the LiveUSB version of the FuguIta can only use 2GB of space.
 Of this, the FuguIta system occupies about 1GB, so the usbfadm can only store about 1GB of data.
 The usbfadm utility that comes with the FuguIta has a function called expand that allows you to expand the size of a specified partition.
 An example of using expand is shown below.
  fugu-demo# usbfadm
  Welcome to usbfadm.
  USB flash drive administration tool for FuguIta
   Version/Arch: 7.0/i386	 (FuguIta-7.0-i386-202112291)
      Boot mode: manual
  Target device: not set
  Data saved as: not set
  readline capability available
  TAB to complete the reserved words
  Type ? for help.
  ? : ? ->target
  Searching storage device
  Please make sure the device inserted.
  Then press ENTER ->
  sd0i sd0j sd0k sd1a +sd1d vnd5a  <= 
  target device ->sd1d
  sd1d : ? ->info
  Filesystem     Size    Used   Avail Capacity iused   ifree  %iused  Mounted on
  /dev/sd1d      1.1G    2.5K    1.1G	0%	 5 1287065     0%   /mnt  <= 
  512B	7.0/i386/noasks
  sd1d : ? ->expand
  Select the expansion method for sd1d:
    1:  growfs - expands the partition while retaining its contents
    2:  newfs - expand and format the partition
    3: [exit without expansion]
 There are two ways to expand a partition: "growfs" and "newfs".
 In growfs, the area is expanded while retaining the data stored in the partition.
 With newfs, the partition is reformatted after the space has been expanded.
 Please note that all files and directories stored in the partition will be lost with newfs. On the other hand, it is recommended that you make a backup of your data before running growfs as well.
  This makes sd1d as large as possible.
  Note that all contents in sd1d will be removed
  Do you proceed? [y/N] -> y
  /dev/rsd1d: 3136.5MB in 6423488 sectors of 512 bytes
  257 cylinder groups of 12.24MB, 3134 blocks, 6272 inodes each
  super-block backups (for fsck -b #) at:
   144, 25216, 50288, 75360, 100432, 125504, 150576, 175648, 200720, 225792,
   6368432, 6393504, 6418576,
  ** /dev/rsd1d
  ** File system is already clean
  ** Last Mounted on
  ** Phase 1 - Check Blocks and Sizes
  ** Phase 2 - Check Pathnames
  ** Phase 3 - Check Connectivity
  ** Phase 4 - Check Reference Counts
  ** Phase 5 - Check Cyl groups
  1 files, 1 used, 5611214 free (14 frags, 701400 blocks, 0.0% fragmentation)
  sd1d : ? ->info  <= 
  Filesystem     Size    Used   Avail Capacity iused   ifree  %iused  Mounted on
  /dev/sd1d      2.7G    2.5K    2.7G	0%	 5 1611897     0%   /mnt
  512B	7.0/i386/noasks
  sd1d : ? ->quit
  Bye bye...
 >''Note:'' The parameters of the file system (format format, block size, fragment size, i-node density, etc.) are used as they were before the expansion in growfs, whereas in newfs, the parameters appropriate for the expanded size are set and the formatting is executed.
 ** desktop environment setup [#vfc178d9]
 FuguIta provides an utility command dtjsetup that allows you to easily install a X11 desktop environment.
  # dtjsetup
  # Welcome to dtjsetup
  #     Desktop (and Japanese) setup utility
  # for FuguIta-6.7-amd64-202008261
  Which desktop software will you install?
    1:  no desktop (wm only)
    2: [rox-filer]
    3:  xfce
    4:  mate
    5:  lumina
    6:  lxqt
  ->           Pressing just ENTER means selecting an item
                 enclosed in braces ("rox-filer" in this case).
  Which window manager will you install?
    1:  cwm
    2:  fvwm
    3:  twm
    4: [icewm]
    5:  fluxbox
    6:  jwm
  Will you setup Japanese language environment? [y/N] ->
  *** You selected icewm as desktop software.
  *** Installing Japanese environment is NO.
  *** No Japanese input method choosen.
  *** Checking your root authorization...
  *** OK.
  *** Checking network accessibility...
  *** OK.
  *** Installing packages: rox-filer icewm
  Will you continue? [y/N] -> y
  quirks-3.325 signed on 2020-08-11T12:56:29Z
     ... snip ...
  *** Rewrite .xsession configuration file.
  Will you continue? [y/N] -> y
  Copy this .xsession file to /etc/skel ? [y/N] -> y
  *** all installation and configuration completed.
  *** Check your /root/.xsession and login to X if OK.
  *** Note: You can save this configuration and addtionally installed softwares
  ***	  by using usbfadm utility.
  ***	  And can reload them at next boot time by selecting boot mode 3.
 If you want to install a WM not listed, set the environment variable DTJ_WMS to the WM you want to add to the list and run dtjsetup.
  DTJ_WMS='dwm enlightenment' dtjsetup
 On the other hand, you can add a WM which has been already installed by edit manually the .xsesson file generated by dtjsetup.
 '''~/.xsession''' file:
  . $HOME/.profile
  if [ -x /usr/local/bin/dbus-launch -a -z "${DBUS_SESSION_BUS_ADDRESS}" ]; then
          eval `dbus-launch --sh-syntax --exit-with-x11`
  wm="fvwm"         replace this with your WM
  case "$dt" in
          xsetroot -solid gray12
          xclock -geometry 115x115-0+0 -analog -update 1 -fg white -bg '#000020' -hd gray25 -hl white &
          xterm -geometry +0+0 -rv &
 ** set clock to time zone [#me75e3bf]
 To set the OS clock to your timezone, link from /etc/localtime to a zone file under the /usr/share/zoneinfo directory.
  # cd /etc
  # ln -sf /usr/share/zoneinfo/Asia/Tokyo localtime
 If you said YES at setup of Japanese Environment of dtjsetup, you should not do this.
 If you said YES at setup of Japanese Environment of dtjsetup, you do not need to do this.
 ** doas utility configuration [#cc9ef589]
 In OpenBSD, the command doas is used to temporarily perform work as a system administrator.
 By setting the contents of the doas configuration file /etc/doas.conf as follows, users belonging to the wheel group can perform system management tasks.
  # echo permit persist :wheel > /etc/doas.conf
 ** adding software packages [#u9b1e683]
 If you wish add application softwares more, ports/packages system can be used as usual. ~
 Please refer [[OpenBSD's FAQ>https://www.openbsd.org/faq/faq15.html]] for detailed info.
 ** adding an normal user [#r3ded977]
 To create an normal user, use adduser utility as follows:
  # adduser
  Couldn't find /etc/adduser.conf: creating a new adduser configuration file
  Reading /etc/shells
  Enter your default shell: csh ksh nologin sh [ksh]:
  Your default shell is: ksh -> /bin/ksh
  Default login class: authpf bgpd daemon default pbuild staff unbound
  Enter your default HOME partition: [/home]:
  Copy dotfiles from: /etc/skel no [/etc/skel]:
  Send welcome message?: /path/file default no [no]:
  Do not send message(s)
  Prompt for passwords by default (y/n) [y]:
  Default encryption method for passwords: auto blowfish [auto]:
  Use option ``-silent'' if you don't want to see all warnings and questions.
  Reading /etc/shells
  Check /etc/master.passwd
  Check /etc/group
  Ok, let's go.
  Don't worry about mistakes. There will be a chance later to correct any input.
  Enter username []: yoshi
  Enter full name []: Yoshihiro Kawamata
  Enter shell csh ksh nologin sh [ksh]:
  Uid [1000]:
  Login group yoshi [yoshi]:
  Login group is ``yoshi''. Invite yoshi into other groups: guest no
  [no]: wheel                add wheel group to enable system administration from yoshi user
  Login class authpf bgpd daemon default pbuild staff unbound
  Enter password []:
  Enter password again []:
  Name:	     yoshi
  Password:    ****
  Fullname:    Yoshihiro Kawamata
  Uid:	     1000
  Gid:	     1000 (yoshi)
  Groups:	     yoshi wheel
  Login Class: default
  HOME:	     /home/yoshi
  Shell:	     /bin/ksh
  OK? (y/n) [y]: y
  Added user ``yoshi''
  Copy files from /etc/skel to /home/yoshi
  Add another user? (y/n) [y]: n
 Next, login as an ordnary user "yoshi" to check such account enabled
  # exit
  OpenBSD/amd64 (fugu-demo.local) (tty00)
  login: yoshi
  OpenBSD 6.7-stable (RDROOT.MP) #5: Wed Jul 22 12:57:54 JST 2020
  Welcome to OpenBSD: The proactively secure Unix-like operating system.
  Please use the sendbug(1) utility to report bugs in the system.
  Before reporting a bug, please try to reproduce it with the latest
  version of the code.  With bug reports, please try to ensure that
  enough information to reproduce the problem is enclosed, and if a
  known fix for it exists, include that as well.
  fugu-demo$ pwd
  fugu-demo$ exit
 * save and load your data (LiveUSB only) [#t502cf6e]
 All the settings you have made up to this point exist on the file system in memory, so if you shut down this way all of them will be lost.
 FuguIta can save the settings you have made and the data files you have created in the LiveUSB partition and load them back on next boot.
 ** saving files and directories when FuguIta is running [#x6e38c99]
 A utility called usbfadm is used to save settings and data.
  # usbfadm
  Welcome to usbfadm.
  USB flash drive administration tool for FuguIta
    Version/Arch: 6.7/amd64  (FuguIta-6.7-amd64-202008261)
       Boot mode: manual
  Data stored in: not set
   Data Saved as: not set
  Type ? for help.
  ? : ? ->target             Use "target" to specify the partition to save to
  Searching storage device
  Please make sure the device inserted.
  Then press ENTER ->
  sd0a +sd0d                 the partition for saving data is marked as '+'
  target device->sd0d
  sd0d : ? ->saveas          Use "saveas" to name the set of saved data
  Name of saved data->fugu-demo
  Your data will be saved as ``fugu-demo''.
  sd0d : fugu-demo ->sync    "sync" saves data actually
  Sync current tmpfs as ``fugu-demo'' , OK? [y/N] -> y
  copying /ram to /mnt/livecd-config/6.7/amd64/fugu-demo (30720KB approx.):
  pax: ./tmp/sndio/sock0 skipped. Sockets cannot be copied or extracted
  pax: ./var/run/ntpd.sock skipped. Sockets cannot be copied or extracted
  pax: ./var/run/smtpd.sock skipped. Sockets cannot be copied or extracted
  pax: ./var/run/cron.sock skipped. Sockets cannot be copied or extracted
  25.0MiB 0:00:02 [10.6MiB/s] [===========================>      ] 83% ETA 0:00:00
  waiting for pax to finish ... syncing ... done.
  sd0d : fugu-demo ->info    confirm the status of the target disk partition
  Filesystem     Size    Used   Avail Capacity iused   ifree  %iused  Mounted on
  /dev/sd0d      961M   22.8M    939M	2%   20423 1116663     2%   /mnt
  22.8M	6.7/amd64/fugu-demo
  sd0d : fugu-demo ->quit
  Bye bye...
 Since the second and subsequent syncs perform differential transfer using rsync, it will finish in a shorter time than the first sync.
 >''Note:'' You can do usbfadm's sync on a command line of shell as follows:
  # usbfadm -r
 The option '-r' will redo usbfadm's sync on a command line.~
 And also you can do it background by cron:
  # crontab file
  #minute hour    mday    month   wday    command
  # save session periodically
  0       */4     *       *       *       PATH=$PATH:/usr/local/bin /usr/fuguita/sbin/usbfadm -rq
 This will do usbfadm's sync every 4 hours. ''-q'' is the option for quiet.
 ** loading files and directories at subsequent boot [#b1ae29b2]
 To restore the data saved by usbfadm at startup, specify startup mode 3.
  Boot modes:
    0: fresh boot - standard mode as a live system
    1: fresh boot - less memory, faster boot (/usr is non-writable, can't pkg_add)
    2: fresh boot - works using only RAM (about 1GB or more of RAM required)
    3: boot with retrieving saved files from storage device
       or enter passphrase for an encrypted volume
    4: boot with retrieving saved files from floppy disk
    5: interactive shell for debugging
  scanning partitions: sd0a sd0d sd0i cd0a
  Device(s) found:
    loadable from: sd0d
  Which is FuguIta's storage device? [default: sd0d] ->
  /dev/sd0d : available data;
  config name -> fugu-demo
  Copying files from flash to ram ...
     ... snip ...
  starting local daemons: cron.
  fuguita: disabled KARL because of read-only media
  Thu Sep	 3 15:13:36 JST 2020
  OpenBSD/amd64 (fugu-demo.localnet) (tty00)
 >''Note:'' Even if you are using FuguIta Live DVD, it is possible to save the data and load them at the next boot if LiveUSB is also attached.
 ** automate load/save operation [#i52c9a37]
 *** automated load [#ld09b1eb]
 FuguIta prompts the user to enter the following 5 items at boot time:
 -Name of FuguIta's system partition
 -Maximum capacity of TMPFS (RAM file system)
 -Boot mode
 -Name of data storage device
 -Name of data you saved as
 You can automate those inputs by editing the noasks files in the d partition of your LiveUSB system (in case of OpenBSD/amd64).
  # mount /dev/sd0d /mnt                                          
  # vi /mnt/livecd-config/7.0/amd64/noasks
 Edit noasks file to fill item values and to uncomment them
  # noasks - parameter settings for non-interactive boot
  # Make statements uncommented
  # to activate settings
  # FuguIta system device
  # tmpfs size in MB
  # boot mode
  # storage device
  # data set name in USB flash drive
  # umount /mnt
 Since noasks edited, following line will appear at boot time:
  # reboot
  =     ______               __   _
  =    / ____/              |  |_| |__
  =   / /____  ______  __  _|  /_   _/_____
  =  / ___/ / / / __ \/ / / |  | | | /  _  |
  = / /  / /_/ / /_/ / /_/ /|  | | |_| (_) |__
  =/_/   \____/\__  /\____/ |__| \___/____/__/
  =            __/ /
  =           /___/
  = Welcome to FuguIta!  -  OpenBSD Live System
  =                 http://fuguita.org/?FuguIta
  scanning partitions: wd0i wd0j sd0a sd0d sd0i
  FuguIta's operating device(s): sd0a.
  Press ^C to cancel non-interactive boot
 Wait 5 seconds after this message is displayed, and the boot will be continued without any user interaction.
 If you enter <Control>-C within 5 seconds, the automatic boot by the noasks file will be stopped and the normal manual operation will be restored. 
 *** automated save [#kb488fee]
 In the previous section, we explained the automation at the start of FuguIta, and you can also automate the process of saving data at the shutdown.
 In OpenBSD, the script /etc/rc.shutdown is executed when the system shuts down, so append following lines to this file.
  export PATH=$PATH:/usr/local/bin
  /usr/fuguita/sbin/usbfadm -r
 >''Note:'' This process does not perform error recovery during the save process, so the system will continue to shutdown even if the save fails.~
 If you perform important processing during operation, we recommend that you manually save the data separately.
 *More further infomations [#k4ad03c2]
 FuguIta can be used in various ways by combining boot modes and media. 
 See the [[蚕期饶ガイド(FuguIta Gaido)>蚕期饶ガイド]] for such applications. The FuguIta Guide is the comprehensive document written in Japanese. If you can't read Japanese, please refer to [[English version>https://liquorstane.ynh.fr/fuguita/]] which was translated by Alfredo Vogel.
 Here's the translated table of contents for Japanese version of FuguIta Guide:
 - [[What is FuguIta>蚕期饶ガイド#v1de7f5b]]
 - [[Make FuguIta>蚕期饶ガイド#ha898539]]
 -- [[Download FuguIta>蚕期饶ガイド#r740bc2a]]
 -- [[Making FuguIta LiveDVD>蚕期饶ガイド#ibfed0ca]]
 -- [[Make FuguIta LiveUSB>蚕期饶ガイド#sa216e5d]]
 - [[Launch FuguIta>蚕期饶ガイド#i322b9ad]]
 -- [[Select boot device>蚕期饶ガイド#e21929c7]]
 -- [[Memory usage setting>蚕期饶ガイド#ceed87b2]]
 -- [[Select boot mode>蚕期饶ガイド#f8b048c7]]
 -- [[Keyboard layout settings>蚕期饶ガイド#te842ff2]]
 -- [[Set administrator password>蚕期饶ガイド#ad3588bf]]
 -- [[Network related settings>蚕期饶ガイド#sffc6969]]
 --- [[Host name setting>蚕期饶ガイド#ie5a333c]]
 --- [[Select IP protocol version>蚕期饶ガイド#m437800b]]
 --- [[Network interface settings>蚕期饶ガイド#b17e97e6]]
 --- [[Domain name setting>蚕期饶ガイド#xd790bd7]]
 --- [[WiFi settings>蚕期饶ガイド#gcd7e74b]]
 --- [[IP address and DNS settings>蚕期饶ガイド#n0705aa2]]
 -- [[Select login method>蚕期饶ガイド#a5fdbf53]]
 - [[Using FuguIta [Fundamental]>蚕期饶ガイド#v7ad37bc]]
 -- [[Login/logout as system administrator>蚕期饶ガイド#w2c53668]]
 -- [[Register general users>蚕期饶ガイド#h1216f6c]]
 -- [[Start X Window System.>蚕期饶ガイド#a1cfa1e7]]
 -- [[Shutdown FuguIta>蚕期饶ガイド#r5ff7390]]
 -- [[Save settings and files>蚕期饶ガイド#k57e4ba1]]
 -- [[Load saved settings and files at startup>蚕期饶ガイド#w4595c42]]
 -- [[Find out how to use Unix>蚕期饶ガイド#qd261f24]]
 --- [[Prepare your books>蚕期饶ガイド#eb296ff3]]
 --- [[Just do it yourself &br; Make use of the online manual>蚕期饶ガイド#ra99ba26]]
 --- [[Let's use the net as "reference information">蚕期饶ガイド#yd1087f1]]
 --- [[Summary of this section>蚕期饶ガイド#w8477b64]]
 -- [[Find out how to use OpenBSD>蚕期饶ガイド#z306ec3b]]
 --- [[Introduction>蚕期饶ガイド#y69d2587]]
 --- [[Online documentation>蚕期饶ガイド#p2cb140a]]
 --- [[File on system>蚕期饶ガイド#p9f62bb7]]
 --- [[Information on the Internet>蚕期饶ガイド#z8ce8604]]
 --- [[Books>蚕期饶ガイド#cf43eff9]]
 - [[Using FuguIta [Advanced]>蚕期饶ガイド#kf683b7c]]
 -- [[Add an application software>蚕期饶ガイド#af9dcfcb]]
 -- [[Allow general users to temporarily become system administrators>蚕期饶ガイド#f2649d0e]]
 -- [[Change the time zone>蚕期饶ガイド#i0182778]]
 -- [[Example of Server Configuration - Change NTP server which refers to time>蚕期饶ガイド#j453b186]]
 -- [[Change OS settings>蚕期饶ガイド#g61850e9]]
 --- [[Kernel parameter>蚕期饶ガイド#k3a552ed]]
 --- [[Basic network settings>蚕期饶ガイド#pd55b21e]]
 --- [[Starting/stopping daemon and setting>蚕期饶ガイド#j2c6731d]]
 --- [[Other settings>蚕期饶ガイド#k8fb92e4]]
 -- [[Boot Mode 1 - Reduce startup time. Use less memory>蚕期饶ガイド#h4bd3eba]]
 -- [[Boot Mode 2 - Run FuguIta without recording media>蚕期饶ガイド#zaeb073d]]
 -- [[usbfadm - Install FuguIta according to the capacity of USB memory>蚕期饶ガイド#ld36d7ec]]
 -- [[noasks file - Allow to omit setting input at startup>蚕期饶ガイド#b493ab9a]]
 -- [[Allow data to be saved automatically on exit>蚕期饶ガイド#m8ee7943]]
 -- [[Encrypt data storage area>蚕期饶ガイド#f90fbf26]]
 -- [[Use multiple FuguIta together>蚕期饶ガイド#o7bfa547]]
 -- [[Coexisting OpenBSD and FuguIta>蚕期饶ガイド#d99117a6]]
 -- [[Coexisting FuguIta with Windows or Linux>蚕期饶ガイド#b882fb9c]]
 -- [[Enable swap partition>蚕期饶ガイド#y45d0ddf]]
 -- [[Add a partition to mount>蚕期饶ガイド#d052ec6d]]
 -- [[dtsetup - Install desktop environment to X Window System>蚕期饶ガイド#r41dd079]]
 --- [[Enable X login screen>蚕期饶ガイド#ceb55706]]
 -- [[Update FuguIta>蚕期饶ガイド#h2ce3537]]
 --- [[The major release of OpenBSD is upgraded>蚕期饶ガイド#tb60f1b9]]
 --- [[The major release of OpenBSD haven't chaned>蚕期饶ガイド#re866f1d]]
 -- [[Using FuguIta in mobile environment>蚕期饶ガイド#x0c50917]]
 --- [[Power supply related settings>蚕期饶ガイド#v970bab0]]
 --- [[gennetconfs and chnetconf - switching between multiple network settings>蚕期饶ガイド#k430482e]]
 --- [[Use a WiFi device that requires a firmware download>蚕期饶ガイド#e665ce39]]
 - [[Developing FuguIta>蚕期饶ガイド#oc4ca9a6]]
 -- [[Check FuguIta's technical information>蚕期饶ガイド#h45738ed]]
 -- [[Dedicate FuguIta to the application's dedicated machine>蚕期饶ガイド#a09cd894]]
 -- [[Make FuguIta ISO image from running FuguIta>蚕期饶ガイド#ad9d1db1]]
 -- [[LiveDVD - Using FuguIta development tools>蚕期饶ガイド#m0eda68f]]
 --- [[Before work>蚕期饶ガイド#e85a44f6]]
 --- [[Setting up the kernel source tree>蚕期饶ガイド#z983a95c]]
 --- [[Setting up FuguIta build tool>蚕期饶ガイド#ma7c8a0b]]
 --- [[Generating kernels for a FuguIta>蚕期饶ガイド#zbf4c5c3]]
 --- [[Updating RAM disk root file system (rdroot)>蚕期饶ガイド#ca5a61ab]]
 --- [[Write the file tree of FuguIta to ISO contents>蚕期饶ガイド#zb14f179]]
 --- [[Carrying out customization work>蚕期饶ガイド#w5fe26a3]]
 --- [[Setting up kernel and boot loader>蚕期饶ガイド#af76f3a2]]
 --- [[Creating an ISO image file for distribution>蚕期饶ガイド#e42504c4]]
 --- [[List of Makefile targets>蚕期饶ガイド#c647d459]]
 -- [[LiveUSB - Make a disk image of FuguIta>蚕期饶ガイド#z05e6da1]]
 - [[At the end>蚕期饶ガイド#i3c5a3cb]]
Reload  New Edit Diff Attach Copy Rename  Top Index Search Recent Backups  Help  RSS