#contents
 ----
 OpenBSD has the utility for burning CD-R/CD-RW, called ''cdio''.
 
 And FuguIta has a tool which whole FuguIta system into another USB frashdrive.
 
 So, if you wish to get a USB flashdrive version of FuguIta,
 -First, create a FuguIta LiveCD.
 -Next, boot that LiveCD, then create another USB version of Fuguita, using usbfadm utility on the LiveCD version FuguIta.
 
 *Creating FuguIta LiveCD [#h0d93246]
 -Download the ISO image of FuguIta from the site described in [[FuguIta/Download]].
  ftp http://livecd-morror.ebug.jp/LiveCD/FuguIta-5.X-20YYMMDDN.iso.gz
  ftp http://mirror.ginzado.ne.jp/pub/FuguIta/FuguIta-6.X-20YYMMDDN.iso.gz
 /// ftp http://fuguita.org/dl/FuguIta-5.X-20YYMMDDN.iso.gz
 Note that the part ''YYMMDDN'' must be replaced with the version string of real ISO image.
 -After decompression completed, burn that image into CD-R or CD-RW.
  gzip -d FuguIta-5.X-20YYMMDDN.iso.gz
  gzip -d FuguIta-6.X-20YYMMDDN.iso.gz
  cdio -f /dev/cd0c blank   (blanking media, needed only for CD-RW)
  cdio -f /dev/cd0c tao FuguIta-5.X-20YYMMDDN.iso
 
 *Creating FuguIta LiveUSB [#h1779af1]
 //There are two ways to do it.
 ///
 //''a: Using the provided image for USB flash drive'' ~
 //By this procedure, fixed size of partitions (650MB for FuguIta's system, about //300MB for saving user's data) are set up.
 //>
 //-Download the image for USB flash drive
 // ftp http://livecd-mirror.ebug.jp/LiveCD/FuguIta-5.X-20YYMMDDN.usbimg.gz
 //-Decompressing that image, and write it into USB storage device.
 // gzip -dc FuguIta-5.X-20YYMMDDN.usbimg.gz | dd of=/dev/rsd?c bs=16384k
 ///
 //''b: Generate LiveUSB from LiveCD'' (after version FuguIta-4.6-201001232) ~
 //By this procedure, the data partition will be automatically allocated. ~
 //Also, you can specify its size.
 //>
 -First, create FuguIta LiveCD according above description, then run it.
 -Login as root, then execute ''newdrive'' subcommand on the USB management tool ''usbfadm''.
  # usbfadm
  
  Welcome to usbfadm.
  USB flash drive maintenance tool for FuguIta
  
       Boot mode: manual
  
  Type ? for help.
  
  ? : ? --> newdrive
 Scanning USB devices after pressing ENTER.
  Please make sure the device inserted.
  Then press ENTER --> 
 Enter the device name of USB flash drive. ~
 Contents of system log entries are displayed for your information;
  ==== FYI: sd[0-9] on syslog ================================
       1  sd0 at scsibus1 targ 1 lun 0: <TOSHIBA, TransMemory, PMAP>
       2  sd0: 961MB, 512 bytes/sec, 1968128 sec total
       3  sd1 at scsibus2 targ 1 lun 0: <Generic, USB CF Reader, 0.00>
       4  sd1: drive offline
       5  sd2 at scsibus2 targ 1 lun 1: <Generic, USB SD Reader, 0.00>
       6  sd2: drive offline
       7  sd3 at scsibus2 targ 1 lun 2: <Generic, Mini SD Reader, 0.00>
       8  sd3: drive offline
       9  sd4 at scsibus2 targ 1 lun 3: <Generic, USB MS Reader, 0.00>
      10  sd4: drive offline
      11  sd5 at scsibus2 targ 1 lun 4: <Generic, USB SM Reader, 0.00>
      12  sd5: 62MB, 512 bytes/sec, 128000 sec total
  ============================================================
  Enter name of device which FuguIta will be installed --> sd0
 Enter ''y'' to set up FuguIta-bootable USB flash drive ((In case of enter ''n'', System of FuguIta will not be transferred to the drive, and only partition for saving user data will be set up)).
  Do you make this USB flash drive bootable? [y/n] -> y
 After transferring the system, by specifying '*', the rest will be allocated as the partition which user will save his data.
  Enter size for saving User Data in MB (311MB free).
  '*' implies all --> *
 Otherwise the numeric value should be entered as the size of saving data (MB) ~
 Room not used as OpenBSD's area will be formatted as FAT. ~
 For example;
  Enter size for saving User Data in MB (311MB free).
  '*' implies all --> 250
 in case of this, 250MB is for saving data of FuguIta user.
 and 61MB becomes FAT.
 ~
 Finally, you'll be asked whether the device is that you really intend.
  ***THIS IS THE LAST CHANCE***
  If you type 'Y' now, all the data on sd0 will be lost.
  Are you sure to initialize sd0? [y/N] -> y
  
  ========================================
  = Clearing MBR BSD disklabel
  =
  1+0 records in
  1+0 records out
  1048576 bytes transferred in 0.099 secs (10562763 bytes/sec)
  
  ========================================
  = Setting up MBR
  =
  Writing MBR at offset 0.
  ...... continues ......
 After this, formatting filesystems and copying system files are done.
 Then FuguIta LiveUSB is completed.
 *Booting FuguIta [#rba5c27f]
 After booting from CD/USB,
 some user inputs will be prompted;
  disks: *cd0a fd0 fd1 rd0 sd0
  Disk to boot FuguIta? [cd0a] ->
 '*' means the device which stores FuguIta system
    user memory: 267927552 bytes
  mfs available: 10MB to 255MB
  [default: 127MB] -> 
 Only entering "ENTER", half amount of attached memory is specified by default.
  set mfs size to default: 127MB
 Choose the way of boot
  Select boot mode;
    0: fresh boot (normal)
    1: fresh boot (lower memory, faster boot than mode 0)
    2: fresh boot (everything on mfs)
    3: retrieve user data from USB flash memory
    4: retrieve user data from floppy disk
    5: interactive shell for debugging
  ->0
 :0 normal fresh boot mode|Like booting just after fresh install. Some parameters are needed to be entered manually. This is the standard fresh boot method.
 :1 fresh boot with faster and less memory|Same as above. ~
 But under /usr, all files and directories are ''read only''.
 :2 ''everything on mfs'' mode (i.e. diskless mode)|Same as mode 0. ~
 All files and directories will have copied on mfs. This mode requires about more than 650--700MB RAM.
 :3 Restoring user data from USB flashdrive|After CD/USB boot, extract files which were stored in USB flash. (to be more described)
 :4 Restoring user data from floppy disk|Same as above, but extracting from floppy disk. (to be more described)
 :5 Interactive shell mode|After CD/USB boot, single user shell invoked. This is intended for system debug.
 
 At first, you should enter mode 0 (recommended) or mode 1.
  Running manual setup.
  Copying system files to /mfs ... done
  Extracting symlinks from /mfs to /fuguita ... done
 Choose keyboard type
  Keyboard type;
  be      be.swapctrlcaps br      cf
  cf.nodead       de      de.nodead       dk
  dk.nodead       es      fr      fr.dvorak
  fr.swapctrlcaps fr.swapctrlcaps.dvorak  hu      it
  jp      jp.swapctrlcaps la      lt
  lv      nl      nl.nodead       no
  no.nodead       pl      pt      ru
  sf      sf.nodead       sg      sg.nodead
  si      sv      sv.nodead       tr
  tr.nodead       ua      uk      us
  us.declk        us.dvorak       us.iopener      us.swapctrlcaps
  us.swapctrlcaps.dvorak  us.swapctrlcaps.iopener
  -> us
 Enter root password twice
  Please wait.....
  Changing local password for root.
  New password:
  Retype new password:
 Setting network parameters.
  host name (without domain) -> nimbus5
  
  IP version(s) to use [n, 4, 6 or 46]-> 46
  
  ==[ifconfig -a]=========================
  lo0: flags=8008<LOOPBACK,MULTICAST> mtu 33200
          priority: 0
          groups: lo
  ne3: flags=8822<BROADCAST,NOTRAILERS,SIMPLEX,MULTICAST> mtu 1500
          lladdr 52:54:00:12:34:56
          priority: 0
          media: Ethernet 10baseT full-duplex
  enc0: flags=0<> mtu 1536
          priority: 0
  ========================================
  Available network interface(s): ne3
  network interface to setup [ne3] -> 
  
  FQDN of this host -> nimbus5.localnet
  
  for DNS servers;
   * up to three IPv4/IPv6 addresses, separated by spaces
   * just press ENTER for DHCP
   * "none" for not using DNS
  -> 192.168.18.254
  
  IPv4 addr of this host -> 192.168.18.25
  netmask                -> 255.255.255.0
  default route          -> 192.168.18.254
 In above case;
 -IPv4 was configured manually.
 -IPv6 was set up as end node by automatic stateless configuration.
 
 ...then you will see a login prompt.
  Generation of SSH and isakmpd keys take some time while booting.
  ========================================
  Automatic boot in progress: starting file system checks.
  setting tty flags
  kbd: keyboard mapping set to us
  pf enabled
 ....snip....
  starting network daemons: sshd rtsold sendmail inetd.
  starting local daemons:.
  standard daemons: cron.
  Sat May 29 06:19:13 JST 2010
  
  OpenBSD/i386 (nimbus5.localnet) (tty00)
  
  login: 
 ----
 #topicpath
Reload  New Edit Diff Attach Copy Rename  Top Index Search Recent Backups  Help  RSS