#norelated
RIGHT:[[日本語コンテンツはこちら>河豚板]]

*'' '''Fugu'''Ita'' - '' '''Open'''BSD-based Live System'' [#b073af7c]
RIGHT:Yoshihiro Kawamata~
kaw@on.rim.or.jp ~
[[facebook>https://www.facebook.com/yoshihiro.kawamata.52]]

**[[Release 7.0>FuguIta/7.0]] [#c0969829]
-[[FuguIta-7.0-*-202204111>FuguIta/Download]]
-- applied patch 020 for OpenBSD 7.0
**[[Release 7.1>FuguIta/7.1]] [#c0969829]
-[[FuguIta-7.1-*-202205011>FuguIta/Download]]
--[[Patch-001 of OpenBSD 7.1>https://www.openbsd.org/errata71.html#p001_wifi]] has been already applied.

- Note: Some incompatibilities occur ''when loading data saved with usbfadm sync in releases older than 202202222'' with the current release's boot mode 3. ~
To fix this problem, please do the following.
 # cd /etc
 # mv /usr/fuguita/etc fuguita
 # mv netconfs fuguita
 # ln -sf fuguita/netconfs/NETCONF-NAME/myname .
 # usbfadm -r
'''NETCONF-NAME''' is the name of the network configuration, as specified in gennetconf. '''NETCONF-NAME''' is "default" if it has not been changed from the settings for a new boot (boot mode 0, 1 or 2). ~
If usbfadm sync cannot be executed, please perform above steps for the data already saved in the USB flashdrive directly.
''Release Note:''~
Fuguita 7.1 uses MFS (Memory File System) instead of TMPFS (Temporary File System) as the file system in memory.~
The changes are as follows

-In TMPFS, the file system capacity was automatically set when 0 was specified as the file system capacity at boot time, but MFS has no such function, so the file system capacity must be specified explicitly.~
In addition, a unit symbol can be added after the numerical value to specify the file system capacity. The symbol K stands for kilobyte, M for megabyte, and G for gigabyte. If there is only a number without a suffix, it is assumed to be a megabyte.~
You can also specify the value as a percentage of the RAM capacity by appending %, or as a percentage of the total RAM and swap file capacity by appending %% .

-In MFS, there is an upper limit to the amount of space that can be allocated for each architecture. The upper limit is approximately 1 gigabyte for i386, 30 gigabytes for amd64, and 15 gigabytes for arm64.~
If the explicit capacity specification in the previous section exceeds these limits, the specified value will be suppressed to these limits.

-The use of the build tool has been greatly improved. If you are building with the standard configuration of FuguIta, you can run make several times to generate an ISO image.

**What is FuguIta? [#z48eecb3]
FuguIta is an [[OpenBSD>https://www.openbsd.org/index.html]]-based Live System.
-supported platforms
--i386 - the Intel i386 architecture and compatible processors
--amd64 - AMD64-based systems
--arm64 - 64-bit ARM systems (preconfigured for Raspberry Pi 3)

-providing
--ISO image files for LiveDVD
--disk image files for other Live devices (USB, SD, HDD, SSD...etc)

***Features [#l51b33f8]

-''Close to a normal OpenBSD installation''
>FuguIta is designed to be as similar as possible to a normal OpenBSD installation, so you can log in and configure your system in the usual way, and most of the OpenBSD documentation is still available.~
You can also add software using OpenBSD's ports/packages system.

-''Support tools provided''
--Easy setup utilities for [[desktop environments>FuguIta/StartGuide#r3782537]] and [[network>FuguIta/BBS/10#r8011bc5]]

--Remastering (and customizing) of [[LiveUSB>FuguIta/StartGuide#q4366f48]] and [[LiveDVD>FuguIta/BBS/10#b44793c3]]~
You can [[create an encrypted partition>FuguIta/BBS/9#i79876b5]] in a LiveUSB.

>>The LiveUSB version has the following features.

--[[Save files>FuguIta/StartGuide#uea040b9]] and [[restore them at subsequent boot>FuguIta/StartGuide#l55eea8b]] (can be [[automated>FuguIta/StartGuide#ib622aa0]])

--[[Updater>FuguIta/BBS/10#kc657395]] for easy and safe updating LiveUSB

-''Flexible Operation''
--Various boot modes according to HW specifications~
For example, it can complete booting with only 70MB of memory. (i386, mode 1, no X)

--Live system but [[non-interactive boot>河豚板ガイド#b493ab9a]] is possible

--Can support anomalous hardware configurations [[by attaching multiple FuguIta devices>https://twitter.com/yoshi_kaw/status/1364564391060852736]].

-''Tracking errata''
>In addition to the semi-annual releases, we also create and release support for OpenBSD errata (security fixes and feature enhancements) that occur in between.

'' '''Fugu'''Ita'' (&ref(fuguita.gif);) stands for "Blowfish Disk" in Japanese. ''Fugu'' means blowfish, and ''Ita'' means something flat such as a plate, a disk or a board etc... ~
Some Japanese might associate those who cook when hearing Ita.
For them, so '' '''Fugu'''Ita'' also means "Blowfish Cook" as double meaning.

[[The introduction video of FuguIta>https://www.youtube.com/watch?v=4wPSr1WPH3U&cc_load_policy=1&cc_lang_pref=en]] (with auto-translated subtitles) is available on YouTube.

**More Information [#f44edeaa]

-''[[FuguIta Start Guide>FuguIta/StartGuide]]'' - COLOR(red){'''Please read this first!'''}
>A guide to setting up and fundamental usage of FuguIta.

-''FuguIta Guide''
>A comprehensive document of FuguIta - setting up, fundamental and advanced usage, development.~
~*[[河豚板ガイド]] (FuguIta Gaido) ... Japanese original version&br;*[[FuguIta-Guide>https://fuguita.liquorstane.ynh.fr/fuguita]] ... English version translated by Alfredo Vogel 

-[[FuguIta/Download]] ... Links to download source

-[[FuguIta/ScreenShots]] ... FuguIta at various situations

-[[FuguIta/BBS]] ... Leave your messages.

-[[FuguIta/Links]] ... Other OpenBSD-based Live Systems.

----


Front page   New Page list Search Recent changes   Help   RSS of recent changes