Creating FuguIta LiveCD

Createing FuguIta LiveUSB

Booting FuguIta

After booting from CD/USB, some user inputs will be prompted;

511 MB of memory available for you.
your mfs size in megabytes? [default: 255] -> 

Only entering "ENTER", half amount of attached memory is specified by default.

Allocating 255 MB for mfs.

Choose the way of boot

Select boot mode;
   0: fresh boot (normal)
   1: fresh boot (lower memory, faster boot than mode 0)
   2: fresh boot (everything on mfs)
   3: retrieve user data from USB flash memory
   4: retrieve user data from floppy disk
   5: interactive shell for debugging
 ->0
0 normal fresh boot mode
Like booting just after fresh install. Some parameters are needed to be entered manually. This is the standard fresh boot method.
1 fresh boot with faster and less memory
Same as above.
But under /usr, all files and directories are read only.
2 all on memory mode
Same as mode 0.
All files and directories will have copied on mfs. This mode requires about more than 650--700MB RAM.
3 Restoring user data from USB flashdrive
After CD/USB boot, extract files which were stored in USB flash. (to be more described)
4 Restoring user data from floppy disk
Same as above, but extracting from floppy disk. (to be more described)
5 Interactive shell mode
After CD/USB boot, single user shell invoked. This is intended for system debug.

At first, you should enter mode 0 (recommended) or mode 1.

Copying files from CD-ROM to mfs ... done
Linking files from mfs to CD-ROM ... done

Choose keyboard type

Set your keyboard type;
tables available for pc-xt/pc-at keyboard: encoding us de de.nodead fr dk 
dk.nodead it uk jp sv sv.nodead no no.nodead us.declk us.dvorak 
us.swapctrlcaps us.iopener jp.swapctrlcaps fr.swapctrlcaps be.swapctrlcaps 
us.swapctrlcaps.dvorak us.swapctrlcaps.iopener es be ru ua sg sg.nodead sf 
sf.nodead pt lt la br tr tr.nodead pl hu si
-> us

Enter root password twice

Set your root password.....
Please wait.....
Changing local password for root.
New password:
Retype new password:

Setting network parameters.

Setting up network configurations? -> y
your host name (without domain)? -> nimbus5
Setting up IP network configurations? [n, 4, 6 or 46]-> 46
========================================
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33224
        inet 127.0.0.1 netmask 0xff000000 
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
dc0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        address: 00:00:39:58:cf:05
        media: Ethernet autoselect (100baseTX full-duplex)
        status: active
        inet6 fe80::200:39ff:fe58:cf05%dc0 prefixlen 64 scopeid 0x1
pflog0: flags=0<> mtu 33224
pfsync0: flags=0<> mtu 2020
enc0: flags=0<> mtu 1536
========================================
your network interface? -> dc0
your FQDN? -> nimbus5.localnet
your DNS servers?
(up to three IPv4/6 addresses, separated by spaces)
-> 192.168.18.254
your IPv4 addr or "dhcp"? -> 192.168.18.25
your netmask? -> 255.255.255.0
your default gateway? -> 192.168.18.254
Generate cryptographic keys? -> y

... then you will see login prompt


Top/FuguIta/StartGuide

*1 In case of enter n, System of FuguIta will not be transferred to the drive, and only partition for saving user data will be set up

Front page   New Page list Search Recent changes   Help   RSS of recent changes